|
EXACTECH, INC. EQ REV GLENOID PLATE; PROSTHESIS, SHOULDER, NON-CONSTRAINED, METAL/POLYMER CEMENTED
|
Back to Search Results |
|
| Catalog Number |
320-15-01 |
| Medical Device Problem Code |
Adverse Event Without Identified Device or Use Problem (2993)
|
| Health Effect - Clinical Codes |
Bone Fracture(s) (1870); Periprosthetic fracture (4902)
|
| Date of Event |
05/13/2009
|
|
Type of Reportable Event
|
Serious Injury
|
|
Additional Manufacturer Narrative
|
|
D10: 300-01-09 - equ, humeral stem primary, press fit 9mm: (b)(6), 320-38-00 - 145-deg pe 38mm hum liner +0: (b)(6), 320-10-00 - equ reverse tray adapter plate tray +0: (b)(6), 320-01-38 - equ reverse 38mm glenosphere: (b)(6), 320-15-01 - eq rev glenoid plate: (b)(6), 320-15-05 - eq rev locking screw: (b)(6).The reported event was unable to be confirmed due to limited information received from the customer.No device was returned for evaluation; further, photographs and/or radiograph images were not provided for review.Operative notes and/or medical records were not provided for review of usage/ technique.A definitive root cause was unable to be determined as the necessary information to adequately investigate the reported event was not provided.If any further information is obtained that would change or alter any information provided, a supplemental report will be filed accordingly.
|
| |
|
Event or Problem Description
|
|
It was reported that the patient underwent an initial total shoulder replacement on the right side.The patient experienced an intraoperative glenoid fracture.The surgeon converted to rtsa with autograft.No further impact to the patient was reported.No other information is available.
|
| |
|
Additional Manufacturer Narrative
|
|
This follow-up report is being submitted to relay additional and/or corrected information.The following sections were updated/corrected: d1/d2a/d2b, d4, g4, h4, h6 mdr section codes updated/corrected: b, c, e the reason for the intraoperative bone fracture reported cannot be conclusively determined but may be related to a patient condition or high forces during broaching, reaming, exposure, or retraction.However, this cannot be confirmed based on the information provided.If any further information is obtained that would change or alter any information provided, a supplemental report will be filed accordingly.
|
| |
|
Search Alerts/Recalls
|
|
|