MAUDE Adverse Event Report: ETHICON INC. VCL+ VIO 27IN 2-0 S/A SH; SUTURE, ABSORBABLE, SYNTHETIC

Catalog Number	VCP317H
Medical Device Problem Code	Break (1069)
Health Effect - Clinical Code	No Clinical Signs, Symptoms or Conditions (4582)
Date of Event	01/01/2025
Type of Reportable Event	Malfunction
Additional Manufacturer Narrative
Product complaint # (b)(4).H6 component code: g07002 - device not returned this report is being submitted pursuant to the provisions of 21 cfr, part 803, part 4 subpart b.This report may be based on information which has not been investigated or verified prior to the required reporting date.This report does not reflect a conclusion by ethicon, or its employees that the report constitutes an admission that the product, ethicon, or its employees caused or contributed to the potential event described in this report.If information is obtained that was not available for the initial report, a follow-up report will be filed as appropriate.A manufacturing record evaluation was performed for the finished device lot, and no non-conformances were identified.Attempts have been made to retrieve the device.To date the device has not been returned.If the device or further details are received at a later date a supplemental medwatch will be sent.Attempts are being made to obtain the following information.To date no response has been provided.If further details are received at a later date a supplemental medwatch will be sent.- did any needle piece(s) fall into the patient? *if yes, o was\were the needle piece(s) retrieved during the same procedure? o were x-rays taken to locate the needle piece(s)? o what measures were taken to retrieve the broken piece(s)? o was there any additional tissue damage as a result of searching for the needle piece(s)? - please provide the status of the device(s) as it has not been received for analysis.If the device has been shipped, provide the shipment tracking details.- provide the source or name and title of external person providing answers to follow-up (external person submitting answers to sales rep).
Event or Problem Description
It was reported that a patient underwent an unknown procedure in 2025 and suture was used.During the procedure, it was reported by the sales rep that during an unknown procedure, the needled broke while suturing.The needle was found.Device is available for return.No adverse patient consequences were reported.Additional information was requested.
Additional Manufacturer Narrative
Product complaint # (b)(4).Date sent to the fda: 10/27/2025.This report is being submitted pursuant to the provisions of 21 cfr, part 803, part 4 subpart b.This report may be based on information which has not been investigated or verified prior to the required reporting date.This report does not reflect a conclusion by ethicon, or its employees that the report constitutes an admission that the product, ethicon, or its employees caused or contributed to the potential event described in this report.If information is obtained that was not available for the initial report, a follow-up report will be filed as appropriate.Additional information: d9, h3, h6 corrected information: d4 udi.H3 investigational summary: a failed suture needle, labeled as (b)(4), was submitted for fractographic evaluation.The component was identified as product code vcp317h.A fracture was observed near the tip of the needle.The needle was received in two pieces, only one of the mating fracture surfaces was examined for this evaluation.A scanning electron microscope was used to examine the fracture surfaces and surrounding area of the needle.The fracture surfaces were examined in multiple locations to determine the fracture mode.The evaluation of (b)(4) revealed the fracture was composed of microvoid coalescence, which is evidence of a ductile fracture mode.Mechanical damage observed coincidental to the fracture provides additional evidence that the failure was induced by mechanical deformation leading to ductile overload.This was a ductile fracture.

• Brand Name: VCL+ VIO 27IN 2-0 S/A SH
• Common Device Name: SUTURE, ABSORBABLE, SYNTHETIC
• Manufacturer (Section D): ETHICON INC.; 1000 route 202; raritan NJ 08869
• Manufacturer (Section G): ETHICON INC.-SAN ANGELO; 3348 pulliam st; san angelo TX 76905
• Manufacturer Contact: orla o'mahony ; 1000 route 202; raritan, NJ 08869 ; 3035526892
• MDR Report Key: 22808870
• Report Number: 2210968-2025-09352
• Device Sequence Number: 12712245
• Product Code: GAM
• UDI-Device Identifier: 10705031149809
• UDI-Public: (01)10705031149809(17)290930(10)103S56
• Combination Product (Y/N): Y
• Initial Reporter Country: US
• PMA/510(K) Number: K132580
• Number of Events Summarized: 1
• Summary Report (Y/N): N
• Serviced by Third Party (Y/N): Unknown
• Reporter Type: Manufacturer
• Report Source: Health Professional,Company Representative
• Initial Reporter Occupation: Other
• Type of Report: Initial,Followup
• Report Date (Section B): 08/14/2025

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Is this an Adverse Event Report?: No
• Is this a Product Problem Report?: Yes
• Operator of Device: Health Professional
• Device Catalogue Number: VCP317H
• Device Lot Number: 103S56
• Was Device Available for Evaluation?: Device Returned to Manufacturer
• Is the Reporter a Health Professional?: No
• Type of Report(Section G): Thirty-Day
• Initial Date Received by Manufacturer: 07/17/2025
• Supplement Date Received by Manufacturer: 10/24/2025
• Initial Report FDA Received Date: 08/14/2025
• Supplement Report FDA Received Date: 10/27/2025
• Was Device Evaluated by Manufacturer? (Y/N): Yes
• Date Device Manufactured: 10/03/2024
• Is the Device Labeled for Single Use? (Y/N): Yes
• Is This a Single-Use Device that was Reprocessed and Reused on a Patient? (Y/N): No
• Usage of Device: Initial
• Patient Sequence Number: 1
• Patient Sex: Unknown