MAUDE Adverse Event Report: MENTOR TEXAS MENTOR SMOOTH ROUND SPECTRUM; PROSTHESIS, BREAST, INFLATABLE, INTERNAL, SALINE

Catalog Number	3501430
Medical Device Problem Code	Material Rupture (1546)
Health Effect - Clinical Code	Deformity/ Disfigurement (2360)
Date of Event	07/30/2025
Type of Reportable Event	Serious Injury
Additional Manufacturer Narrative
Since the device has not been returned for analysis, no product failure analysis can be conducted, and no determination of possible contributing factors can be made.As such, the investigation will be closed.If the complaint device is received in the future, the investigation will be reopened and conducted as appropriate.A manufacturing record evaluation (mre) was performed, and no anomalies were found related to this complaint.In addition, the mre verifies that the device was manufactured in accordance with documented specification and procedures.Reason for device explant and/or reoperation: deflation.D6b.Explantation date: (b)(6) 2025.Mentor is submitting this report pursuant to the provisions of 21 cfr, part 803.This report may be based on information which mentor has not been able to investigate or verify prior to the required reporting date.This report does not reflect a conclusion by fda, mentor, or its employees that the report constitutes an admission that the device, mentor, or its employees caused or contributed to the potential event described in this report.If certain information is unknown, not available or does not apply, the section/field of the form is left blank.Manufacturer¿s reference number: (b)(4).
Event or Problem Description
It was reported that a 34-year-old caucasian female patient underwent a primary breast augmentation with a 225cc mentor smooth round spectrum saline breast prosthesis and experienced a deflation on the left side post-operatively, which was diagnosed with a physical.As a result, the patient underwent explantation on (b)(6) 2025.
Additional Manufacturer Narrative
On november 12, 2025, mentor received additional information regarding the patient's replacement device.It was reported that the patient's replacement device was a 275cc mentor smooth round moderate plus profile saline breast prosthesis.Manufacturer¿s reference number: (b)(4).
Additional Manufacturer Narrative
On december 04, 2025, the mentor failure analysis lab has received the device for evaluation.The analysis has begun but is not complete at this time.When the investigational analysis has been completed, a supplemental report will be submitted.Manufacturer¿s reference number: (b)(4).
Additional Manufacturer Narrative
On december 29, 2025, the evaluation for the device was completed.Device evaluation summary: during the visual analysis of the returned device , no apparent damage or visual anomalies were observed.Leak test was performed according to mentor procedures and it revealed a tear on the anterior aspect measuring approximately 0.1 cm.No additional leak sites were found.Microscopic examination was performed and the cause of the deflation could not be identified.Therefore a thickness measurement was conducted on the shell at the tear, and the thickness was within manufacturing specifications.Mentor also performed a manufacturing record evaluation related to the reported complaint for the finished device lot number.No manufacturing non-conformances were identified as part of this evaluation.Although no conclusion could be reach on the cause of the reported event, the instructions for use contain the following caution: causes of deflation of saline implants include but are not limited to the following events: crease fold failure, intraoperative or postoperative trauma, excessive stresses or manipulations as may occur during normal, daily routines including customary and purposeful trauma such as that which can occur during vigorous exercise, athletics, etc.As part of mentor's quality process, all devices are manufactured, inspected, and released according to approved specifications.Based on the results of this investigation, it was determined that the product met the manufacturing release criteria: no corrective and preventive action (capa) is required now.Additional complaint information monitoring for potential safety signals is conducted through complaint trending as part of post market surveillance.Manufacturer¿s reference number: (b)(4).

• Brand Name: MENTOR SMOOTH ROUND SPECTRUM
• Common Device Name: PROSTHESIS, BREAST, INFLATABLE, INTERNAL, SALINE
• Manufacturer (Section D): MENTOR TEXAS; 3041 skyway circle north; irving TX 75038
• Manufacturer (Section G): MENTOR TEXAS; 3041 skyway circle north; irving TX 75038
• Manufacturer Contact: henry boden ; 3041 skyway circle north; irving, TX 75038 ; 9497882078
• MDR Report Key: 22856730
• Report Number: 1645337-2025-09273
• Device Sequence Number: 21079320
• Product Code: FWM
• UDI-Device Identifier: 00081317001973
• UDI-Public: (01)00081317001973(17)160229(10)6558579
• Combination Product (Y/N): N
• Initial Reporter Country: US
• PMA/510(K) Number: P990075
• Number of Events Summarized: 1
• Summary Report (Y/N): N
• Device Implanted Year: 2012
• Serviced by Third Party (Y/N): Unknown
• Reporter Type: Manufacturer
• Report Source: Health Professional
• Initial Reporter Occupation: Other
• Type of Report: Initial,Followup,Followup,Followup

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Is this an Adverse Event Report?: Yes
• Is this a Product Problem Report?: Yes
• Operator of Device: Health Professional
• Device Expiration Date: 02/29/2016
• Device Catalogue Number: 3501430
• Device Lot Number: 6558579
• Was Device Available for Evaluation?: Device Returned to Manufacturer
• Is the Reporter a Health Professional?: No
• Type of Report(Section G): Follow-Up
• Initial Date Received by Manufacturer: 07/31/2025
• Supplement Date Received by Manufacturer: 11/12/2025; 12/04/2025; 12/29/2025
• Initial Report FDA Received Date: 08/20/2025
• Supplement Report FDA Received Date: 12/01/2025; 12/23/2025; 12/31/2025
• Was Device Evaluated by Manufacturer? (Y/N): Yes
• Date Device Manufactured: 03/02/2012
• Is the Device Labeled for Single Use? (Y/N): Yes
• Is This a Single-Use Device that was Reprocessed and Reused on a Patient? (Y/N): No
• Usage of Device: Initial
• Patient Sequence Number: 1
• Outcome Attributed to Adverse Event: Required Intervention
• Patient Age: 34 YR
• Patient Sex: Female
• Patient Ethnicity: Non Hispanic
• Patient Race: White