• Decrease font size
  • Return font size to normal
  • Increase font size
U.S. Department of Health and Human Services

MAUDE Adverse Event Report: ABBOTT MEDICAL TACTISYS QUARTZ RF CABLE TACTIFLEX SE; CATHETER, PERCUTANEOUS, CARDIAC ABLATION, FOR TREATMENT OF ATRIAL FIBRILLATION

  • Print
  • Share
  • E-mail
-
Super Search Devices@FDA
510(k) | DeNovo | Registration & Listing | Adverse Events | Recalls | PMA | HDE | Classification | Standards
CFR Title 21 | Radiation-Emitting Products | X-Ray Assembler | Medsun Reports | CLIA | TPLC
 

ABBOTT MEDICAL TACTISYS QUARTZ RF CABLE TACTIFLEX SE; CATHETER, PERCUTANEOUS, CARDIAC ABLATION, FOR TREATMENT OF ATRIAL FIBRILLATION Back to Search Results
Model Number TSQ-RF-TFSE-CBL
Medical Device Problem Code Signal Artifact/Noise (1036)
Health Effect - Clinical Code No Clinical Signs, Symptoms or Conditions (4582)
Date of Event 08/29/2025
Type of Reportable Event Malfunction
Event or Problem Description
During a premature ventricular contraction procedure, there were issues with noise on the ecg resulting in cancellation of the procedure.Mapping and ablation were performed, but consolidation was needed.The patient had been sedated during ablation as they were experiencing pain.The prs-ps moved so mapping was performed again.At this time, there was a lot of noise on the ecg.The noise was not able to be resolved, and it was decided to end the procedure due to not being able to map and pace the premature ventricular contraction.It is unknown what was causing the issue.Upon clean up the noise on the ecg disappeared when removing the tactiflex cable from the tactisys.The cable was reconnected, bringing back the noise, and then disconnected and the noise resolved once again.It is unknown what was causing this as the tactiflex was used for mapping at the beginning of the procedure without issue.
 
Additional Manufacturer Narrative
Additional information: b5, g3, h2.
 
Event or Problem Description
During a premature ventricular contraction procedure, there were issues with noise on the ecg resulting in cancellation of the procedure.Mapping and ablation were performed, but consolidation was needed.The patient had been sedated during ablation as they were experiencing pain.The prs-ps moved so mapping was performed again.At this time, there was a lot of noise on the ecg.The noise was not able to be resolved, and it was decided to end the procedure due to not being able to map and pace the premature ventricular contraction.It is unknown what was causing the issue.Upon clean up the noise on the ecg disappeared when removing the tactiflex cable from the tactisys.The cable was reconnected, bringing back the noise, and then disconnected and the noise resolved once again.It is unknown what was causing this as the tactiflex was used for mapping at the beginning of the procedure without issue.The tactisys and tactiflex to tactisys cable have both been used in procedures since without issue.
 
Additional Manufacturer Narrative
Additional information: g3, h2, h3, h6.The results of the investigation are inconclusive since the device was not returned for analysis.Based on the information received, the cause of the reported incident could not be determined.Review of the device history record was not possible as the lot number is unknown.
 
Search Alerts/Recalls

  New Search  |  Submit an Adverse Event Report

Brand Name
TACTISYS QUARTZ RF CABLE TACTIFLEX SE
Common Device Name
CATHETER, PERCUTANEOUS, CARDIAC ABLATION, FOR TREATMENT OF ATRIAL FIBRILLATION
Manufacturer (Section D)
ABBOTT MEDICAL
one st. jude medical drive
st. paul MN 55117
Manufacturer (Section G)
ABBOTT MEDICAL
one st. jude medical drive
st. paul MN 55117
Manufacturer Contact
wendy mccarty
5050 nathan lane north
plymouth, MN 55442
6517565400
MDR Report Key23042746
Report Number2184149-2025-00152
Device Sequence Number15988219
Product Code OAE
UDI-Device Identifier05415067034700
UDI-Public05415067034700
Combination Product (Y/N)N
Initial Reporter CountryBE
PMA/510(K) Number
P220013
Number of Events Summarized1
Summary Report (Y/N)N
Serviced by Third Party (Y/N)Unknown
Reporter Type Manufacturer
Report Source Foreign,Health Professional,Company Representative
Initial Reporter Occupation Physician
Type of Report Initial,Followup,Followup
Report Date (Section B) 12/16/2025
1 Device was Involved in the Event
1 Patient was Involved in the Event
Is this an Adverse Event Report? No
Is this a Product Problem Report? Yes
Operator of Device Health Professional
Device Model NumberTSQ-RF-TFSE-CBL
Device Catalogue NumberTSQ-RF-TFSE-CBL
Was Device Available for Evaluation? No
Is the Reporter a Health Professional? Yes
Was the Report Sent to FDA? No
Type of Report(Section G)Thirty-Day
Initial Date Received by Manufacturer 08/29/2025
Supplement Date Received by Manufacturer09/22/2025
11/18/2025
Initial Report FDA Received Date09/12/2025
Supplement Report FDA Received Date10/22/2025
12/16/2025
Was Device Evaluated by Manufacturer? (Y/N) No
Is the Device Labeled for Single Use? (Y/N) No
Is This a Single-Use Device that was
Reprocessed and Reused on a Patient? (Y/N)
No
Usage of Device Reuse
Patient Sequence Number1
Concomitant Medical Products
and Therapy/Usage Dates
TACTISYS¿ QUARTZ ABLATION SYSTEM.
Patient SexUnknown
-
-