MAUDE Adverse Event Report: DEPUY IRELAND - 3015516266 EXTRACTOR HANDLE; ORTHOPEDIC HANDLE

Catalog Number	17201A
Medical Device Problem Code	Break (1069)
Health Effect - Clinical Code	No Clinical Signs, Symptoms or Conditions (4582)
Date of Event	09/23/2025
Type of Reportable Event	Malfunction
Additional Manufacturer Narrative
Product complaint # (b)(4).This report is being submitted pursuant to the provisions of 21 cfr, part 803 (and/or part 4, as applicable).This report may be based on information which has not been investigated or verified prior to the required reporting date.This report does not reflect a conclusion by depuy synthes, or its employees that the report constitutes an admission that the product, depuy synthes, or its employees caused or contributed to the potential event described in this report.If information is obtained that was not available for the initial medwatch, a follow-up medwatch will be filed as appropriate.
Event or Problem Description
It was reported that the pieces were broken while trying to disassemble.There was no patient consequence and no delay to case.
Additional Manufacturer Narrative
Product complaint # (b)(4).Investigation summary: it was reported that the pieces were broken while trying to disassemble.There was no patient consequence and no delay to case.The product was returned to depuy synthes for evaluation.Visual analysis of the returned device found that the threaded tip of the extractor handle was broken, the broken fragment remained inside on the threaded t-handle.The evaluation of the returned device, as well as previous analysis performed of related complaints (pc-001923221, pc-001947049, pc-001873170), found that the root cause of failure can be attributed to a combination of potential factors: a high user input load and partially seated threaded connection interface, not all of which are fully understood at this time, which resulted in loading conditions that exceeded the local shear strength of the material.This condition contributed to the thread deformation and/or fracture events.However, without concrete evidence or further information, it is not possible to determine a root cause.A functional test was not performed since it was not applicable to the complaint condition.A dimensional inspection was not performed since it was not applicable to the complaint condition.The overall complaint was confirmed as the observed condition of the extractor handle would have contributed to the complained issue.Based on the investigation findings, it has been determined that no corrective and/or preventative action is proposed.There is no indication that a design or manufacturing issue has caused the reported complaint condition.As part of depuy synthes quality process, all devices are manufactured, inspected, and released to approved specifications.Additional monitoring for any potential safety signals will be conducted through complaint trending and other post-market safety surveillance activities.Device history lot: the product investigation found no evidence suspecting an error in the manufacturing or material that would be a contributing factor in the reported allegation(s).A manufacturing records evaluation (mre) was not performed.

• Brand Name: EXTRACTOR HANDLE
• Common Device Name: ORTHOPEDIC HANDLE
• Manufacturer (Section D): DEPUY IRELAND - 3015516266; loughbeg ringaskiddy co.; cork ; EI
• Manufacturer Contact: elba bello ; 700 orthpaedic dr.; warsaw, IN 46581 ; 9083863534
• MDR Report Key: 23329230
• Report Number: 1818910-2025-17790
• Device Sequence Number: 10572428
• Product Code: LXH
• UDI-Device Identifier: 00197169172010
• UDI-Public: (01)00197169172010(10)PG353722
• Combination Product (Y/N): N
• Initial Reporter State: FL
• Initial Reporter Country: US
• PMA/510(K) Number: EXEMPT
• Number of Events Summarized: 1
• Summary Report (Y/N): N
• Serviced by Third Party (Y/N): Unknown
• Reporter Type: Manufacturer
• Report Source: Health Professional,Company Representative
• Initial Reporter Occupation: Physician
• Type of Report: Initial,Followup

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Is this an Adverse Event Report?: No
• Is this a Product Problem Report?: Yes
• Operator of Device: Health Professional
• Device Catalogue Number: 17201A
• Device Lot Number: PG353722
• Was Device Available for Evaluation?: Device Returned to Manufacturer
• Is the Reporter a Health Professional?: Yes
• Type of Report(Section G): Follow-Up
• Initial Date Received by Manufacturer: 09/26/2025
• Supplement Date Received by Manufacturer: 12/29/2025
• Initial Report FDA Received Date: 10/17/2025
• Supplement Report FDA Received Date: 12/30/2025
• Was Device Evaluated by Manufacturer? (Y/N): Yes
• Date Device Manufactured: 02/04/2025
• Is the Device Labeled for Single Use? (Y/N): No
• Is This a Single-Use Device that was Reprocessed and Reused on a Patient? (Y/N): No
• Usage of Device: Unknown
• Patient Sequence Number: 1
• Patient Sex: Unknown