• Decrease font size
  • Return font size to normal
  • Increase font size
U.S. Department of Health and Human Services

MAUDE Adverse Event Report: CARDIOVASCULAR SYSTEMS INCORPORATED DIAMONDBACK CORONARY; CATHETER, CORONARY, ATHERECTOMY

  • Print
  • Share
  • E-mail
-
Super Search Devices@FDA
510(k) | DeNovo | Registration & Listing | Adverse Events | Recalls | PMA | HDE | Classification | Standards
CFR Title 21 | Radiation-Emitting Products | X-Ray Assembler | Medsun Reports | CLIA | TPLC
 

CARDIOVASCULAR SYSTEMS INCORPORATED DIAMONDBACK CORONARY; CATHETER, CORONARY, ATHERECTOMY Back to Search Results
Model Number DBEC-125
Medical Device Problem Codes Unintended System Motion (1430); Device Damaged by Another Device (2915)
Health Effect - Clinical Code No Clinical Signs, Symptoms or Conditions (4582)
Date of Event 09/24/2025
Type of Reportable Event Malfunction
Event or Problem Description
It was reported that a diamondback 360 precision coronary orbital atherectomy device (oad) was used for treatment of diffuse, long, 360-degree/heavily calcified, non-tortuous, 90% stenosed lesion in mid left anterior descending artery (lad).A non-abbott guide wire was exchanged for a viperwire advance coronary guide wire with flex tip.There was no difficulty wiring or delivering devices.There was no wire bias.Two low-speed treatments were performed.During the third treatment which was at low speed, there was no support and an unspecified guide kept on coming back a little bit.When the guide started pulling back it pulled the viperwire with it and that¿s when the oad crown crossed the lesion, jumped forward and sheared off the viperwire radiopaque spring tip.The fragment remained in distal lad.As the physician believed snaring the fragment would have been more harmful, a stent was used to pin the fragment on the artery wall in distal lad and a second stent placement was performed in mid lad to finish treating it.There were no further complications.The patient was stable and discharged as planned.The physician does not have any concerns about potential long-term risk outcomes.
 
Additional Manufacturer Narrative
Manufacturer's investigation is still pending at this time.Results and conclusions will be provided in the final report.The viperwire guide wire referenced in b5 is filed under a separate medwatch report number.
 
Additional Manufacturer Narrative
Additional information: h3, h6, h11.The device was not returned for analysis.Production record and corrective and preventative actions (capa) reviews were performed and revealed no indication of a product quality issue.Additionally, a query of the complaint handling database for the reported lot revealed there is no indication of a lot specific issue.Based on the information received, the investigation determined that the reported unintended system movement that caused damage to another device appears to be related to operational context.In this case, it is possible that the crown jumping and resulting damage to the guide wire is due to device placement or use techniques employed.However, since the device was not returned this could not be confirmed.Based on the results of the complaint investigation, there is no indication of a product quality issue with respect to the design, manufacture, or labeling of the device.The viperwire guide wire referenced in b5 is filed under a separate medwatch report number.
 
Event or Problem Description
It was reported that a diamondback 360 precision coronary orbital atherectomy device (oad) was used for treatment of diffuse, long, 360-degree/heavily calcified, non-tortuous, 90% stenosed lesion in mid left anterior descending artery (lad).A non-abbott guide wire was exchanged for a viperwire advance coronary guide wire with flex tip.There was no difficulty wiring or delivering devices.There was no wire bias.Two low-speed treatments were performed.During the third treatment which was at low speed, there was no support and an unspecified guide kept on coming back a little bit.When the guide started pulling back it pulled the viperwire with it and that¿s when the oad crown crossed the lesion and jumped forward and sheared off the viperwire radiopaque spring tip.The fragment remained in distal lad.As the physician believed snaring the fragment would have been more harmful a stent was used to pin the fragment on the artery wall in distal lad and a second stent placement was performed in mid lad to finish treating it.There were no further complications.The patient was stable and discharged as planned.The physician does not have any concerns about potential long-term risk outcomes.
 
Search Alerts/Recalls

  New Search  |  Submit an Adverse Event Report

Brand Name
DIAMONDBACK CORONARY
Common Device Name
CATHETER, CORONARY, ATHERECTOMY
Manufacturer (Section D)
CARDIOVASCULAR SYSTEMS INCORPORATED
1225 old highway 8 nw
st. paul MN 55112
Manufacturer (Section G)
CARDIOVASCULAR SYSTEMS INCORPORATED, #3004742232
1225 old highway 8 nw
saint paul MN 55112
Manufacturer Contact
alyssa mickelson
1225 old highway 8 nw
st. paul, MN 55112
6517562718
MDR Report Key23336844
Report Number3004742232-2025-00311
Device Sequence Number7807339
Product Code MCX
UDI-Device Identifier10850026568698
UDI-Public(01)10850026568698(17)260331(10)530176-1
Combination Product (Y/N)N
Initial Reporter StateNV
Initial Reporter CountryUS
PMA/510(K) Number
P130005
Number of Events Summarized1
Summary Report (Y/N)N
Serviced by Third Party (Y/N)N
Reporter Type Manufacturer
Report Source Health Professional,Company Representative
Initial Reporter Occupation Physician
Type of Report Initial,Followup
Report Date (Section B) 11/20/2025
1 Device was Involved in the Event
1 Patient was Involved in the Event
Is this an Adverse Event Report? No
Is this a Product Problem Report? Yes
Operator of Device Health Professional
Device Expiration Date03/31/2026
Device Model NumberDBEC-125
Device Catalogue Number7-10098-01
Device Lot Number530176-1
Was Device Available for Evaluation? No
Is the Reporter a Health Professional? Yes
Type of Report(Section G)Thirty-Day
Initial Date Received by Manufacturer 09/25/2025
Supplement Date Received by Manufacturer11/14/2025
Initial Report FDA Received Date10/20/2025
Supplement Report FDA Received Date11/20/2025
Was Device Evaluated by Manufacturer? (Y/N) Yes
Date Device Manufactured03/05/2024
Is the Device Labeled for Single Use? (Y/N) Yes
Is This a Single-Use Device that was
Reprocessed and Reused on a Patient? (Y/N)
No
Usage of Device Initial
Patient Sequence Number1
Patient Age78 YR
Patient SexMale
Patient Weight110 KG
Patient EthnicityNon Hispanic
Patient RaceWhite
-
-