| Catalog Number |
650700000000 |
| Medical Device Problem Code |
Difficult or Delayed Positioning (1157)
|
| Health Effect - Clinical Code |
No Clinical Signs, Symptoms or Conditions (4582)
|
|
Type of Reportable Event
|
Malfunction
|
|
Additional Manufacturer Narrative
|
|
This record is a consolidation of records summarized as part of the fda voluntary malfunction summary reporting program.2 device(s) was functionally/visually inspected in the field.The device(s) was/were repaired and returned to use.4 devices are pending evaluation.Evaluation results findings (components/results): 1 device: cable; electrical; sensor / electrical/electronic component problem identified, 1 device: chassis/frame / mechanical problem identified, 4 devices: appropriate term/code not available / results pending completion of investigation.There was no remedial action taken.This device is not labeled for single use.
|
| |
|
Event or Problem Description
|
|
This record is a consolidation of records summarized as a part of the fda voluntary malfunction summary reporting program.Events occurred between july 1-september 30, 2025.This report summarizes 6 malfunction event(s), where it was reported the device experienced difficult to load/unload the cot in the ambulance.No adverse consequence or clinically relevant delay in treatment was reported.
|
| |
|
Event or Problem Description
|
|
This report now summarizes 6 malfunction event(s), instead of 5.
|
| |
|
Additional Manufacturer Narrative
|
|
The device was originally removed from the dataset based on an incorrect determination that no defect was present.Following reevaluation, the device was confirmed to have a defect and has been appropriately added back into the summary report.Evaluation results findings (components/results) 1 device: cable, electrical; connector/coupler / electrical/electronic component problem identified; mechanical problem identified.
|
| |
|
Additional Manufacturer Narrative
|
|
1 device that was originally coded as evaluated was found after investigation to have experienced difficult to load / unload the cot in the ambulance, which is not reportable.The 4 devices that were pending evaluation was evaluated in the field and the issue was confirmed.The device was repaired on site and returned to service.Evaluation results findings (components/results) 1 device: coil; plate/deformation problem; device migration 1 device: sensor; circuit board; controller/electrical/electronic component problem identified; failure to calibrate or used out of calibration; mechanical problem identified 1 device: socket/mechanical problem identified 1 device: computer software/failure to calibrate or used out of calibration.
|
| |
|
Event or Problem Description
|
|
This report now summarizes 5 malfunction event(s), instead of 6.
|
| |
|
Search Alerts/Recalls
|