| Catalog Number |
ECR45W |
| Medical Device Problem Code |
Failure to Form Staple (2579)
|
| Health Effect - Clinical Code |
No Clinical Signs, Symptoms or Conditions (4582)
|
| Date of Event |
10/23/2025
|
|
Type of Reportable Event
|
Malfunction
|
|
Additional Manufacturer Narrative
|
|
(b)(4).Date sent: 11/04/2025.D4: batch #unk.A manufacturing record evaluation was performed for the finished device ecr45w with lot number 879a95; and no non-conformances were identified.This report is being submitted pursuant to the provisions of 21 cfr, part 803.This report may be based on information which has not been investigated or verified prior to the required reporting date.This report does not reflect a conclusion by ethicon, or its employees that the report constitutes an admission that the product, ethicon, or its employees caused or contributed to the potential event described in this report.If information is obtained that was not available for the initial report, a follow-up report will be filed as appropriate.
|
| |
|
Event or Problem Description
|
|
It was reported that during an unknown procedure, it was observed that the staples were malformed after firing.Changed to a new one to complete the procedure.There was no patient consequence nor surgical delay reported.No additional information provided.
|
| |
|
Additional Manufacturer Narrative
|
|
(b)(4).Date sent: 1/2/2026 d4: batch #unk additional information was requested, and the following was obtained: please explain in detail what was the issue with the device ""pse45a"".-malformed staples was the firing sequence started but not completed? -no did the device cut? -yes if yes, was the cut line complete? -yes if yes, was there any issue with the cut line such as jagged, dull knife, irregular, etc? -unknown was there any difficulty opening the device? -no a manufacturing record evaluation was performed for the finished device lot 699d51, and no non-conformances were identified.
|
| |
|
Search Alerts/Recalls
|