MAUDE Adverse Event Report: COVIDIEN EEA; STAPLER, SURGICAL

Model Number	EEA2835
Medical Device Problem Code	Failure to Form Staple (2579)
Health Effect - Clinical Code	Failure to Anastomose (1028)
Date of Event	11/10/2025
Type of Reportable Event	Malfunction
Additional Manufacturer Narrative
Medtronic submits this report to comply with fda regulations 21 cfr parts 4 and 803.Medtronic has made reasonable efforts to provide as much relevant information as is available to the company as of the submission date of this report.This report does not constitute an admission or a conclusion by fda, medtronic, or its employees that the device, medtronic, or its employee caused or contributed to the event described in the report.Any required fields that are unpopulated are blank because the information is currently unknown or unavailable.Medtronic will submit a supplemental report if additional relevant information becomes known.
Event or Problem Description
According to the reporter, during a laparoscopic rectal resection, during reconstructing the digestive tract, the staples did not close properly.The surgeon over-sewed the staple line to resolve the issue.
Additional Manufacturer Narrative
Additional information: d9, g3, h3, h6 h3 evaluation summary: medtronic conducted an investigation based upon all information received.The involved device was not returned.Visual inspection noted on the staple guide noted the instrument was fully applied.Further inspection noted that the green bar was visible in the indicator window and the safety feature was not engaged.The staple guide was observed to be attached to the instrument with no damage to the staple guide.After actuating the handle, the pusher fingers appeared to be intact, and inspection under the microscope displayed divots on the knife blade.The anvil of the instrument was observed to be tilted and separated from the instrument.Further inspection of the anvil cutting ring showed shallow traces of knife impression, and the ring was received partially severed.Functional testing found that the wing nut and safety functioned properly upon rotating the twist knob.The green bar was visible within the indicator window when the twist knob was fully closed.The instrument was applied to the appropriate test media, producing acceptable results.Pusher fingers and knife advance when the handle was squeezed, and the knife cut the media cleanly and completely, despite t he noted knife blade damage.The device also produced all audible, tactile, and visual indicators during the functional testing.It was reported that the staple had poor formation.The reported issue was confirmed.The product analysis noted evidence that the device was not used as intended.This issue may occur when the instrument handle compression is not completed or if the instrument is applied against an excessive amount of tissue during the clinical application.The manufacturing records for each device are thoroughly reviewed prior to release to ensure that it meets all medtronic quality specifications.The instructions included with this device provide the following guidance: when firing the stapler, make sure to fully squeeze the instrument handle until the metal underside of the handle contacts the stapler body to the fullest extent.Partial or incomplete handle squeezes may result in unacceptable staple formation and/or incomplete knife cuts.Medtronic submits this report to comply with fda regulations 21 cfr parts 4 and 803.Medtronic has made reasonable efforts to provide as much relevant information as is available to the company as of the submission date of this report.This report does not constitute an admission or a conclusion by fda, medtronic, or its employees that the device, medtronic, or its employee caused or contributed to the event described in the report.Any required fields that are unpopulated are blank because the information is currently unknown or unavailable.Medtronic will submit a supplemental report if additional relevant information becomes known.

• Brand Name: EEA
• Common Device Name: STAPLER, SURGICAL
• Manufacturer (Section D): COVIDIEN; sabanetas industrial park; ponce PR 00716 4401
• Manufacturer (Section G): COVIDIEN; sabanetas industrial park; ponce PR 00716 4401
• Manufacturer Contact: mike bocchino ; 8200 coral sea st ne; mounds view, MN 55112-4391 ; 8006464633
• MDR Report Key: 23569786
• Report Number: 2647580-2025-03428
• Device Sequence Number: 9886035
• Product Code: GAG
• UDI-Device Identifier: 10884523005547
• UDI-Public: (01)10884523005547(17)290331(10)P4D1132S(20)01
• Combination Product (Y/N): N
• Initial Reporter Country: CH
• PMA/510(K) Number: K221003
• Number of Events Summarized: 1
• Summary Report (Y/N): N
• Device Implanted Year: 2025
• Device Explanted Year: 2025
• Serviced by Third Party (Y/N): N
• Reporter Type: Manufacturer
• Report Source: Foreign,Health Professional,Company Representative
• Initial Reporter Occupation: Other Health Care Professional
• Type of Report: Initial,Followup
• Report Date (Section B): 02/18/2026

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Is this an Adverse Event Report?: No
• Is this a Product Problem Report?: Yes
• Operator of Device: Health Professional
• Device Model Number: EEA2835
• Device Catalogue Number: EEA2835
• Device Lot Number: P4D1132S
• Was Device Available for Evaluation?: Device Returned to Manufacturer
• Is the Reporter a Health Professional?: Yes
• Type of Report(Section G): Thirty-Day
• Initial Date Received by Manufacturer: 11/14/2025
• Supplement Date Received by Manufacturer: 02/17/2026
• Initial Report FDA Received Date: 11/17/2025
• Supplement Report FDA Received Date: 02/18/2026
• Was Device Evaluated by Manufacturer? (Y/N): Yes
• Date Device Manufactured: 04/17/2024
• Is the Device Labeled for Single Use? (Y/N): Yes
• Is This a Single-Use Device that was Reprocessed and Reused on a Patient? (Y/N): No
• Usage of Device: Initial
• Patient Sequence Number: 1
• Patient Sex: Unknown