MAUDE Adverse Event Report: SERF BI MENTUM PFRK PE LINER 28 49; ACETABULAR CUP

Catalog Number	DS10014928
Medical Device Problem Code	Adverse Event Without Identified Device or Use Problem (2993)
Health Effect - Clinical Code	Joint Dislocation (2374)
Date of Event	11/05/2025
Type of Reportable Event	Serious Injury
Additional Manufacturer Narrative
Product complaint # (b)(4).This report is being submitted pursuant to the provisions of 21 cfr, part 803 (and/or part 4, as applicable).This report may be based on information which has not been investigated or verified prior to the required reporting date.This report does not reflect a conclusion by depuy synthes, or its employees that the report constitutes an admission that the product, depuy synthes, or its employees caused or contributed to the potential event described in this report.If information is obtained that was not available for the initial report, a follow-up report will be filed as appropriate.
Event or Problem Description
It was reported that the patient was revised due to dislocation.Affected side: right hip.
Additional Manufacturer Narrative
Product complaint # (b)(4).Investigation summary: no device associated with this report was received for examination.Although distributed by depuy synthes joint reconstruction, the product is designed, manufactured, and labeled by the manufacturing supplier.The requirement of fda reporting, complaint investigation, root cause, and corrective action is the responsibility of the designing supplier of this item, per the supplier agreement.The product/information will be transferred to the supplier with the complaint problem statement for investigation.The results of the supplier investigation are to be populated into the depuy synthes customer quality complaint management system.Per the supplier agreement, the supplier is responsible for any corrective actions identified during the complaint investigation process.An analysis of the product could not be performed since a physical sample was not received for evaluation.An evaluation of the manufacturing record could not be performed as the required product identification number was not provided to complete the evaluation.As part of our company quality system process, all devices are manufactured, inspected, and distributed to approved specifications.Additional complaint information monitoring for potential safety signals will be conducted through complaint trending as part of the post-market surveillance.However, if the product is received at a later date, the investigation will be updated as applicable device history lot: a device history record (dhr) review or manufacturing records evaluation (mre) was not possible because lot code provided is not a valid finished goods lot.H11 additional narrative: added: d10.
Additional Manufacturer Narrative
Product complaint # (b)(4).Investigation summary- although distributed by depuy synthes joint reconstruction, the product is designed, manufactured, and labeled by the manufacturing supplier.The requirement of fda reporting, complaint investigation, root cause, and corrective action is the responsibility of the designing supplier of this item, per the supplier agreement.The product/information will be transferred to the supplier with the complaint problem statement for investigation.The results of the supplier investigation are to be populated into the depuy synthes customer quality complaint management system.Per the supplier agreement, the supplier is responsible for any corrective actions identified during the complaint investigation process.The following investigation was provided by the supplier legal manufacturer: an event regarding dislocation involving bi-mentum pe liner 28/49 was reported.The event was not confirmed.Not performed as product was not returned no medical records were received for review with a clinical consultant.All devices were manufactured and accepted into final stock with no relevant reported discrepancies.There have been no other similar events for the reported lot.The exact cause of the event could not be determined because insufficient information was provided.Additional information including operative reports, progress notes, x-rays and return of the device are needed to fully investigate the event.If further information becomes available or the product is returned, this investigation will be re-opened.As part of depuy synthes quality process all devices are manufactured, inspected, and released to approved specifications.No further investigation with regard to this complaint is required.The supplier will continue to monitor for trends.Device history lot- all devices were manufactured and accepted into final stock with no relevant reported discrepancies.

• Brand Name: BI MENTUM PFRK PE LINER 28 49
• Common Device Name: ACETABULAR CUP
• Manufacturer (Section D): SERF; 85 avenue des bruyères; décines-charpieu 69150 ; FR 69150
• MDR Report Key: 23633940
• Report Number: 1818910-2025-150022
• Device Sequence Number: 21154889
• Product Code: LPH
• UDI-Device Identifier: 03662200015658
• UDI-Public: (01)03662200015658(17)260131(10)2006259A
• Combination Product (Y/N): N
• Initial Reporter State: NC
• Initial Reporter Country: US
• Number of Events Summarized: 1
• Summary Report (Y/N): N
• Device Implanted Year: 2023
• Device Explanted Year: 2025
• Serviced by Third Party (Y/N): Unknown
• Reporter Type: Importer
• Initial Reporter Occupation: Other Health Care Professional
• Type of Report: Initial,Followup,Followup
• Report Date (Section B): 12/12/2025
• Report Date (Section F): 11/24/2025

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Is this an Adverse Event Report?: Yes
• Is this a Product Problem Report?: No
• Operator of Device: Health Professional
• Device Expiration Date: 01/31/2026
• Device Catalogue Number: DS10014928
• Device Lot Number: 2006259A
• Was Device Available for Evaluation?: No
• Is the Reporter a Health Professional?: Yes
• Was the Report Sent to FDA?: Yes
• Distributor Facility Aware Date: 01/22/2026
• Event Location: Hospital
• Date Report to Manufacturer: 11/12/2025
• Type of Report(Section G): Follow-Up
• Initial Date Received by Manufacturer: Not provided
• Supplement Date Received by Manufacturer: Not provided; Not provided
• Initial Report FDA Received Date: 11/24/2025
• Supplement Report FDA Received Date: 12/12/2025; 01/26/2026
• Was Device Evaluated by Manufacturer? (Y/N): No
• Date Device Manufactured: 11/30/2021
• Is the Device Labeled for Single Use? (Y/N): Yes
• Is This a Single-Use Device that was Reprocessed and Reused on a Patient? (Y/N): No
• Usage of Device: Initial
• Patient Sequence Number: 1
• Concomitant Medical Products and Therapy/Usage Dates: DLT TS CER HD 12/14 28MM +8.5; PINNACLE DM LINER 58_49
• Outcome Attributed to Adverse Event: Required Intervention
• Patient Age: 79 YR
• Patient Sex: Female
• Date Report Sent to FDA: 11/24/2025