| Catalog Number |
100/179/080 |
| Medical Device Problem Codes |
Deflation Problem (1149); Gas/Air Leak (2946)
|
| Health Effect - Clinical Code |
No Clinical Signs, Symptoms or Conditions (4582)
|
| Date of Event |
10/17/2025
|
|
Type of Reportable Event
|
Malfunction
|
|
Event or Problem Description
|
|
It was reported that the device's probe and the balloon gauge were checked for re-inflation.In the morning, there was doubt about the deflation, several manometers were used for testing, all showing the same result of deflation.Decision of the anesthetist doctor was to re-intubate the patient.During visual inspection, small air bubbles were seen.After cleaning of the device in a bath and inflating the balloon, air bubbles were again observed at the junction between the tube and the balloon, confirming a leak.
|
| |
|
Additional Manufacturer Narrative
|
|
Investigation including root cause analysis is in progress.A supplemental mdr will be filed as necessary in accordance with 21 cfr 803.56 when additional information becomes available.The device has not been returned to the manufacturer.
|
| |
|
Additional Manufacturer Narrative
|
|
Correction: the initial mdr with the mfr #3012307300-2025-12814 was submitted in error.The information provided noted that the number of incidents was 1, not 2.Refer to mfr #3012307300-2025-12812 for all information pertaining to this file, including investigation results.
|
| |
|
Additional Manufacturer Narrative
|
|
H4, d2b: correction.
|
| |
|
Search Alerts/Recalls
|