MAUDE Adverse Event Report: ETHICON INC. VCL+ UD 8X18IN 1 S/A CTB-1 CR; SUTURE, ABSORBABLE, SYNTHETIC

Catalog Number	VCPB841D
Medical Device Problem Code	Material Separation (1562)
Health Effect - Clinical Code	No Clinical Signs, Symptoms or Conditions (4582)
Type of Reportable Event	Malfunction
Event or Problem Description
It was reported that a patient underwent an unknown procedure on an unknown date and suture was used.During the unknown surgery, the needle and suture detached easily while using.The procedure date and the medical department where the product was used are currently unknown.It was a control release needle.Another product was used to complete the case.There were no adverse consequences to the patient.Further details are not provided from the hp.
Additional Manufacturer Narrative
Product complaint # (b)(4).This report is being submitted pursuant to the provisions of 21 cfr part 803, part 4 subpart b.This report may be based on information which has not been investigated or verified prior to the required reporting date.This report does not reflect a conclusion by ethicon, or its employees that the report constitutes an admission that the product, ethicon, or its employees caused or contributed to the potential event described in this report.If information is obtained that was not available for the initial report, a follow-up report will be filed as appropriate.Attempts are being made to retrieve the device.To date the device has not been returned.If the device or further details are received at a later date a supplemental medwatch will be sent.A manufacturing record evaluation was performed for the finished device lot number, and no related non-conformances were identified.
Additional Manufacturer Narrative
Product complaint # (b)(4).This report is being submitted pursuant to the provisions of 21 cfr part 803, part 4 subpart b.This report may be based on information which has not been investigated or verified prior to the required reporting date.This report does not reflect a conclusion by ethicon, or its employees that the report constitutes an admission that the product, ethicon, or its employees caused or contributed to the potential event described in this report.If information is obtained that was not available for the initial report, a follow-up report will be filed as appropriate.Additional information: b9, h3, h6.Investigation summary: the product was returned to ethicon for evaluation.One empty open foil packet and one winding former with four detached needles and four needle suture combinations was received for analysis.The product code vcpb841d is control release and contains eight strands single armed per packet.Upon visual inspection of four the detached needles, the swage and attachment area were noted to be as expected.The barrel hole of the needles was examined with magnification, and no suture remnant was noted.The sutures were not returned for evaluation.In addition, four needle-suture combinations were visually inspected, the swage and attachment area were noted to be as expected in all needles.Besides that, no anomalies or issues related to pull-off were observed during the evaluation.As the suture is absorbable and the duration of exposure of the suture in the environment could not be determined, the functional test could not be performed.A manufacturing record evaluation was performed for the finished device batch number, and no non-conformances were identified.No conclusion could be reached as to what caused the reported complaint.As part of the quality process, all devices are manufactured, inspected, and released to approved specifications.Additional complaint information monitoring for potential safety signals is conducted through complaint trending as part of post-market surveillance.Representative sample investigation summary : the product was returned to ethicon for evaluation.Two (2) representative unopened samples were received for analysis.Product code vcpb841d.Upon initial inspection of the samples, no external damages were observed on the external packets.In order to evaluate the conditions of the returned samples, the packets were opened, and no defects were detected.The swage and attachment area were noted to be as expected.The sutures were dispensed without problems and examined along the strand to detect any issue related no defects were observed during evaluation.A functional test was performed using instron equipment, and the pull force results met with the requirements.The event described could not be confirmed as the device performed without any defect noted.It should be noted that as part of our quality process, each batch is randomly inspected and functionally tested during manufacturing to ensure the device meets the required specifications prior to shipment.The event described could not be confirmed as no product defect was identified, there may have been other circumstances or issues that occurred during the use of the device that could not be replicated during the laboratory analysis.Additional complaint information monitoring for potential safety signals is conducted through complaint trending as part of post-market surveillance.

• Brand Name: VCL+ UD 8X18IN 1 S/A CTB-1 CR
• Common Device Name: SUTURE, ABSORBABLE, SYNTHETIC
• Manufacturer (Section D): ETHICON INC.; 1000 route 202; raritan NJ 08869
• Manufacturer (Section G): ETHICON INC.-SAN ANGELO; 3348 pulliam st; san angelo TX 76905
• Manufacturer Contact: orla o'mahony ; 1000 route 202; raritan, NJ 08869 ; 3035526892
• MDR Report Key: 23646882
• Report Number: 2210968-2025-13198
• Device Sequence Number: 4824793
• Product Code: GAM
• UDI-Device Identifier: 10705031056640
• UDI-Public: (01)10705031056640(17)300331(10)107XSA
• Combination Product (Y/N): Y
• Initial Reporter Country: JA
• PMA/510(K) Number: K032420
• Number of Events Summarized: 1
• Summary Report (Y/N): N
• Serviced by Third Party (Y/N): Unknown
• Reporter Type: Manufacturer
• Report Source: Foreign,Health Professional,Company Representative
• Initial Reporter Occupation: Other
• Type of Report: Initial,Followup
• Report Date (Section B): 12/26/2025

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Is this an Adverse Event Report?: No
• Is this a Product Problem Report?: Yes
• Operator of Device: Health Professional
• Device Catalogue Number: VCPB841D
• Device Lot Number: 107XSA
• Was Device Available for Evaluation?: Device Returned to Manufacturer
• Is the Reporter a Health Professional?: No
• Type of Report(Section G): Thirty-Day
• Initial Date Received by Manufacturer: 10/30/2025
• Supplement Date Received by Manufacturer: 12/02/2025
• Initial Report FDA Received Date: 11/25/2025
• Supplement Report FDA Received Date: 12/26/2025
• Was Device Evaluated by Manufacturer? (Y/N): Yes
• Date Device Manufactured: 04/23/2025
• Is the Device Labeled for Single Use? (Y/N): Yes
• Is This a Single-Use Device that was Reprocessed and Reused on a Patient? (Y/N): No
• Usage of Device: Initial
• Patient Sequence Number: 1
• Patient Sex: Unknown