MAUDE Adverse Event Report: DEPUY SPINE INC TORQUE LIMITING HANDLE 80IN-LB; ORTHOPEDIC MANUAL SURGICAL INSTRUMENT

Catalog Number	299704320
Medical Device Problem Codes	Calibration Problem (2890); Material Twisted/Bent (2981)
Health Effect - Clinical Code	No Clinical Signs, Symptoms or Conditions (4582)
Date of Event	11/04/2025
Type of Reportable Event	Malfunction
Event or Problem Description
It was reported the devices are worn.It was reported the devices are worn.Torque not sufficient.
Additional Manufacturer Narrative
Product complaint #(b)(4) this report is being submitted pursuant to the provisions of 21 cfr, part 803 (and/or part 4, as applicable).This report may be based on information which has not been investigated or verified prior to the required reporting date.This report does not reflect a conclusion by depuy synthes, or its employees that the report constitutes an admission that the product, depuy synthes, or its employees caused or contributed to the potential event described in this report.Additional narrative: if information is obtained that was not available for the initial medwatch, a follow-up medwatch will be filed as appropriate.
Additional Manufacturer Narrative
Depuy synthes is submitting this report pursuant to the provisions of 21 cfr, part 803.This report may be based on information which depuy synthes has not been able to investigate or verify prior to the required reporting date.This report does not reflect a conclusion by fda, depuy synthes or its employees that the report constitutes an admission that the device, depuy synthes, or its employees caused or contributed to the potential event described in this report.If the information is unknown, not available or does not apply, the section/field of the form is left blank.H11 additional narrative: added: h4, h6 (health effect - impact code).If information is obtained that was not available for the initial medwatch, a follow-up medwatch will be filed as appropriate.
Additional Manufacturer Narrative
Depuy synthes is submitting this report pursuant to the provisions of 21 cfr, part 803.This report may be based on information which depuy synthes has not been able to investigate or verify prior to the required reporting date.This report does not reflect a conclusion by fda, depuy synthes or its employees that the report constitutes an admission that the device, depuy synthes, or its employees caused or contributed to the potential event described in this report.If the information is unknown, not available or does not apply, the section/field of the form is left blank.H11.Additional narrative: added: d9.The device was received, the investigation is in progress, no conclusion could be drawn at the time of filing this report.If information is obtained that was not available for the initial medwatch, a follow-up medwatch will be filed as appropriate.
Additional Manufacturer Narrative
Depuy synthes is submitting this report pursuant to the provisions of 21 cfr, part 803.This report may be based on information which depuy synthes has not been able to investigate or verify prior to the required reporting date.This report does not reflect a conclusion by fda, depuy synthes or its employees that the report constitutes an admission that the device, depuy synthes, or its employees caused or contributed to the potential event described in this report.If the information is unknown, not available or does not apply, the section/field of the form is left blank.H11 additional narrative: h3, h6: the product was returned to depuy synthes for evaluation.Visual analysis of the returned sample revealed that the torque limiting handle 80in-lb, exhibits signs of normal use.A dimensional inspection was not performed as it is not applicable to the complaint condition.A functional test was performed using torque meter mountz ez-torq iii, id#cd78632, adaptor 103579293.Drawing 103327943, rev.D manufactured was used as source of specification.Torque handle is required to deliver 72 - 88 lbf*in at intermediate setting.Actual measured values range from 92.45 - 97.12 lbf*in.The complaint condition was able to be replicated as it resulted in over torquing.(b)(4).The overall complaint was confirmed as the observed condition of the torque limiting handle 80in-lb would contribute to the complained device issue.Based on the investigation findings, it has been determined that no corrective and/or preventative action is proposed.There is no indication that a design or manufacturing issue has caused the reported complaint condition.As part of depuy synthes quality process, all devices are manufactured, inspected, and released to approved specifications.Additional monitoring for any potential safety signals will be conducted through complaint trending and other post-market safety surveillance activities.Device history lot: a review of the receiving inspection (ri) for verse 3in1 driver, torque wr was conducted identifying that lot number gb121247 was released in a single batch.¿ batch1: lot qty of (b)(4) units were released on 07 nov 2019 with no discrepancies.As a result, the ri identified no issues during the manufacturing and release of this device that could have contributed to the problem reported by the customer.Device history review: the ri identified no issues during the manufacturing and release of this device that could have contributed to the problem reported by the customer if information is obtained that was not available for the initial medwatch, a follow-up medwatch will be filed as appropriate.

• Brand Name: TORQUE LIMITING HANDLE 80IN-LB
• Common Device Name: ORTHOPEDIC MANUAL SURGICAL INSTRUMENT
• Manufacturer (Section D): DEPUY SPINE INC; 325 paramount drive; raynham MA 02767
• Manufacturer Contact: elba bello ; 325 paramount drive; raynham, MA 02767 ; 9083863534
• MDR Report Key: 23726958
• Report Number: 1526439-2025-01652
• Device Sequence Number: 10691016
• Product Code: LXH
• UDI-Device Identifier: 10705034467399
• UDI-Public: (01)10705034467399(10)GB121247
• Combination Product (Y/N): N
• Initial Reporter Country: GM
• PMA/510(K) Number: EXEMPT
• Number of Events Summarized: 1
• Summary Report (Y/N): N
• Serviced by Third Party (Y/N): Unknown
• Reporter Type: Manufacturer
• Report Source: Foreign,Health Professional
• Initial Reporter Occupation: Physician
• Type of Report: Initial,Followup,Followup,Followup

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Is this an Adverse Event Report?: No
• Is this a Product Problem Report?: Yes
• Operator of Device: Health Professional
• Device Catalogue Number: 299704320
• Device Lot Number: GB121247
• Was Device Available for Evaluation?: Device Returned to Manufacturer
• Is the Reporter a Health Professional?: Yes
• Type of Report(Section G): Follow-Up
• Initial Date Received by Manufacturer: 11/17/2025
• Supplement Date Received by Manufacturer: 12/08/2025; 12/17/2025; 12/31/2025
• Initial Report FDA Received Date: 12/05/2025
• Supplement Report FDA Received Date: 12/16/2025; 12/23/2025; 01/06/2026
• Was Device Evaluated by Manufacturer? (Y/N): Yes
• Date Device Manufactured: 11/07/2019
• Is the Device Labeled for Single Use? (Y/N): No
• Is This a Single-Use Device that was Reprocessed and Reused on a Patient? (Y/N): No
• Usage of Device: Unknown
• Patient Sequence Number: 1
• Patient Sex: Unknown