MAUDE Adverse Event Report: CONMED CONMED; ELECTROSURGICAL, CUTTING & COAGULATION & ACCESSORIES

Catalog Number	138104
Medical Device Problem Code	Delivered as Unsterile Product (1421)
Health Effect - Clinical Code	No Clinical Signs, Symptoms or Conditions (4582)
Type of Reportable Event	Malfunction
Additional Manufacturer Narrative
Received one of 138104 in original packaging.Lot number was verified.Performed a visual inspection of the device, there were no obvious signs of a breach.Performed a functional inspection, the device was dye leak tested which indicated that the package had an insufficient heat seal.A root cause cannot be determined; however, based upon evaluation of the devices, a possible cause of this event could be device encroaching the seal.The manufacturing documents from the device history record have been reviewed with special attention to the manufacturing and inspection of the product.The product released for distribution was found to have met all specifications prior to shipment.This is the only complaint for this lot number and failure mode within the past two years.A two-year review of complaint history revealed there has been a total of 174 reports, regarding 1,206 devices, for this device family and failure mode.During this same time frame (b)(4) devices have been manufactured and shipped worldwide.Should all the complaint devices have been found confirmed for this reported failure, the rate of failure would be (b)(4).Per the instructions for use, the user is advised the following: inspect and test each device before each use.We will continue to monitor per regulatory requirements to help ensure patient safety.
Event or Problem Description
The distributor reported that the 138104 device had an insufficient heatseal found during incoming inspection.No patient involvement occurred.This report is being raised due to the reported malfunction with potential for injury upon reoccurrence.

• Brand Name: CONMED
• Common Device Name: ELECTROSURGICAL, CUTTING & COAGULATION & ACCESSORIES
• Manufacturer (Section D): CONMED; 525 french rd; utica NY 13502
• Manufacturer (Section G): CONMED UTICA; 525 french rd; utica NY 13502
• Manufacturer Contact: robin drum ; 11311 concept blvd; largo, FL 33773 ; 8653881978
• MDR Report Key: 23777552
• Report Number: 1320894-2025-00275
• Device Sequence Number: 21361577
• Product Code: GEI
• UDI-Device Identifier: 30653405003391
• UDI-Public: (01)30653405003391(17)280708(10)202307101
• Combination Product (Y/N): N
• Initial Reporter Country: JA
• PMA/510(K) Number: K943542
• Number of Events Summarized: 1
• Summary Report (Y/N): N
• Reporter Type: Manufacturer
• Report Source: Foreign,Distributor
• Initial Reporter Occupation: Administrator/Supervisor
• Type of Report: Initial
• Report Date (Section B): 12/11/2025

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Is this an Adverse Event Report?: No
• Is this a Product Problem Report?: Yes
• Operator of Device: Other
• Device Catalogue Number: 138104
• Device Lot Number: 202307101
• Was Device Available for Evaluation?: Device Returned to Manufacturer
• Date Returned to Manufacturer: 11/13/2025
• Type of Report(Section G): Thirty-Day
• Initial Date Received by Manufacturer: 11/25/2025
• Initial Report FDA Received Date: 12/11/2025
• Was Device Evaluated by Manufacturer? (Y/N): Yes
• Date Device Manufactured: 07/10/2023
• Is the Device Labeled for Single Use? (Y/N): Yes
• Is This a Single-Use Device that was Reprocessed and Reused on a Patient? (Y/N): No
• Patient Sequence Number: 1
• Patient Sex: Unknown
• Patient Ethnicity: Non Hispanic