MAUDE Adverse Event Report: SYNTHES GMBH REAMING ROD PUSH ROD 2.5MM SHAFT; REAMER

Catalog Number	SD03.010.093
Medical Device Problem Code	Break (1069)
Health Effect - Clinical Code	No Clinical Signs, Symptoms or Conditions (4582)
Date of Event	01/01/2025
Type of Reportable Event	Malfunction
Event or Problem Description
It was reported that on an unknown date, the reaming rod broke during surgery and the rod pusher was bent as well.Surgical delay was unknown.There was no patient consequences.
Additional Manufacturer Narrative
Product complaint #(b)(4).Depuy synthes is submitting this report pursuant to the provisions of 21 cfr, part 803.This report may be based on information which depuy synthes has not been able to investigate or verify prior to the required reporting date.This report does not reflect a conclusion by fda, depuy synthes or its employees that the report constitutes an admission that the device, depuy synthes, or its employees caused or contributed to the potential event described in this report.If the information is unknown, not available or does not apply, the section/field of the form is left blank.H11 additional narrative: d4: udi: as the lot number for the device involved in the event was not provided, the full udi is currently not available.
Additional Manufacturer Narrative
Depuy synthes is submitting this report pursuant to the provisions of 21 cfr, part 803.This report may be based on information which depuy synthes has not been able to investigate or verify prior to the required reporting date.This report does not reflect a conclusion by fda, depuy synthes or its employees that the report constitutes an admission that the device, depuy synthes, or its employees caused or contributed to the potential event described in this report.H11 additional narrative: added: b5, d10 (concomitant) corrected: e1 (facility name), e4 if information is obtained that was not available for the initial medwatch, a follow-up medwatch will be filed as appropriate.
Event or Problem Description
Additional information received states that there was no surgical delay and the surgery was successful.
Additional Manufacturer Narrative
Depuy synthes is submitting this report pursuant to the provisions of 21 cfr, part 803.This report may be based on information which depuy synthes has not been able to investigate or verify prior to the required reporting date.This report does not reflect a conclusion by fda, depuy synthes or its employees that the report constitutes an admission that the device, depuy synthes, or its employees caused or contributed to the potential event described in this report.If the information is unknown, not available or does not apply, the section/field of the form is left blank.H11 additional narrative: added: b5, d10 (concomitant).Corrected: e1 (facility name), e4.H3, h6: product was not returned.Based on the information available, it has been determined that no corrective and preventative action is proposed.This complaint will be accounted for and monitored via post market surveillance activities.If additional information is made available, the investigation will be updated as applicable.If information is obtained that was not available for the initial medwatch, a follow-up medwatch will be filed as appropriate.
Event or Problem Description
Additional information received states that there was no surgical delay due to this complaint and the surgery was successful.

• Brand Name: REAMING ROD PUSH ROD 2.5MM SHAFT
• Common Device Name: REAMER
• Manufacturer (Section D): SYNTHES GMBH; luzernstrasse 19-21; zuchwil 4528 ; SZ 4528
• Manufacturer (Section G): MONUMENT; 1101 synthes avenue; monument CO 80132
• Manufacturer Contact: elba bello ; 1302 wright lane east; west chester, PA 19380 ; 9083863534
• MDR Report Key: 23782321
• Report Number: 8030965-2025-12404
• Device Sequence Number: 9365408
• Product Code: HTO
• UDI-Device Identifier: 10886982002570
• UDI-Public: (01)10886982002570
• Combination Product (Y/N): N
• Initial Reporter Country: US
• PMA/510(K) Number: EXEMPT
• Number of Events Summarized: 1
• Summary Report (Y/N): N
• Serviced by Third Party (Y/N): Unknown
• Reporter Type: Manufacturer
• Report Source: Health Professional,Company Representative
• Initial Reporter Occupation: Other Health Care Professional
• Type of Report: Initial,Followup,Followup

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Is this an Adverse Event Report?: No
• Is this a Product Problem Report?: Yes
• Operator of Device: Health Professional
• Device Catalogue Number: SD03.010.093
• Was Device Available for Evaluation?: No
• Is the Reporter a Health Professional?: Yes
• Type of Report(Section G): Follow-Up
• Initial Date Received by Manufacturer: 11/21/2025
• Supplement Date Received by Manufacturer: 12/10/2025; 12/30/2025
• Initial Report FDA Received Date: 12/11/2025
• Supplement Report FDA Received Date: 12/15/2025; 12/31/2025
• Was Device Evaluated by Manufacturer? (Y/N): No
• Is the Device Labeled for Single Use? (Y/N): No
• Is This a Single-Use Device that was Reprocessed and Reused on a Patient? (Y/N): No
• Usage of Device: Unknown
• Patient Sequence Number: 1
• Concomitant Medical Products and Therapy/Usage Dates: MONOBLOC FLEX REAMER 11.5 - LONG - DD.; MONOBLOC FLEX REAMER 11.5 - LONG - DD.
• Patient Sex: Unknown