MAUDE Adverse Event Report: C.R. BARD INC. (COVINGTON) -1018233 BARDEX® I.C. TEMPERATURE SENSING FOLEY CATHETER

Catalog Number	129416M
Medical Device Problem Code	Inaccurate Flow Rate (1249)
Health Effect - Clinical Code	Appropriate Clinical Signs, Symptoms and Conditions Term/Code Not Available (4581)
Date of Event	12/05/2025
Type of Reportable Event	Serious Injury
Additional Manufacturer Narrative
The investigation is still in progress.Once the investigation is complete, a supplemental report will be filed.Udi format updated with available product information per gudid.H11: sections a through f - the information provided by bd represents all the known information at this time.Despite good faith efforts to obtain additional information, the complainant / reporter was unable or unwilling to provide any further patient, product, or procedural details to bd.
Event or Problem Description
It was reported that two patients who had temp sensing foley catheter inserted were noted to have little to no urine output.The registered nurse scanned the patient's bladder and found one with over 400cc of urine and the other with over 300cc of urine and nothing had come thru the foley.
Additional Manufacturer Narrative
The reported event was inconclusive because this investigation did not result in any additional findings and no sample was available for evaluation.The reported event is addressed within the labeling as it states: visually inspect the product for any imperfections or surface deterioration prior to use.If package is opened or if any imperfection or surface deterioration is observed, do not use.Warning: on catheter, do not use ointments or lubricants having a petrolatum base.They will damage the catheter and may cause balloon to burst.Proper techniques for urinary catheter maintenance: secure the foley catheter, use the statlock foley stabilization device if provided.Maintain a closed drainage system by utilizing pre-connected, sealed catheter-tubing junctions.Maintain unobstructed urine flow and keep the catheter and collection tube free from kinking.Keep the collection bag below the level of the bladder or hips at all times.Empty the collection bag regularly (e.G., prior to transport) using a separate, clean collection container for each patient.Routine hygiene (e.G., cleansing of the meatal surface during daily bathing or showering) is appropriate.Leave foley catheter in place only as long as needed.Attach the water filled syringe to the inflation port.Note: it is not necessary to pre-test the foley catheter balloon.Remove foley catheter from wrap and lubricate catheter.Prepare patient with 3 foam swab sticks saturated in povidone iodine.Use the nondominant hand for the genitalia and the dominant hand for the swabs.Inflate catheter balloon using entire 10cc of sterile water provided in the prefilled syringe.Note: use of less than 10cc can result in asymmetrically inflated balloon.Once inflated, gently pull catheter until the inflated balloon is snug against the bladder neck.A review of the device history record did not show any problems or conditions that would have contributed to the reported issue.No additional actions can be taken at this time.Correction: d.Udi format updated with available product information per gudid.H11: sections a through f - the information provided by bd represents all the known information at this time.Despite good faith efforts to obtain additional information, the complainant/reporter was unable or unwilling to provide any further patient, product, or procedural details to bd.
Event or Problem Description
It was reported that two patients who had temp sensing foley catheter inserted were noted to have little to no urine out put.The registered nurse scanned the patient's bladder and found one with over 400cc of urine and the other with over 300cc of urine and nothing had come thru the foley.

• Brand Name: BARDEX® I.C. TEMPERATURE SENSING FOLEY CATHETER
• Common Device Name: FOLEY CATHETER
• Manufacturer (Section D): C.R. BARD INC. (COVINGTON) -1018233; 8195 industrial blvd; covington GA 30014
• Manufacturer (Section G): C.R. BARD INC. (COVINGTON) -1018233; 8195 industrial blvd; covington GA 30014
• Manufacturer Contact: xeeroy rada ; 8195 industrial blvd; covington, GA 30014 ; 7707846100
• MDR Report Key: 23794077
• Report Number: 1018233-2025-11079
• Device Sequence Number: 16069822
• Product Code: MJC
• UDI-Device Identifier: 00801741039775
• UDI-Public: (01)00801741039775(11)250829(17)270930(10)NGKU3044
• Combination Product (Y/N): Y
• Initial Reporter State: AL
• Initial Reporter Country: US
• PMA/510(K) Number: K040658
• Number of Events Summarized: 1
• Summary Report (Y/N): N
• Reporter Type: Manufacturer
• Report Source: Other,Health Professional,User Facility,Company Representative
• Initial Reporter Occupation: Physician
• Type of Report: Initial,Followup
• Report Date (Section B): 02/05/2026

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Is this an Adverse Event Report?: Yes
• Is this a Product Problem Report?: Yes
• Operator of Device: Health Professional
• Device Catalogue Number: 129416M
• Device Lot Number: NGKU3044
• Was Device Available for Evaluation?: No
• Is the Reporter a Health Professional?: Yes
• Type of Report(Section G): Thirty-Day
• Initial Date Received by Manufacturer: 12/05/2025
• Supplement Date Received by Manufacturer: 02/05/2026
• Initial Report FDA Received Date: 12/12/2025
• Supplement Report FDA Received Date: 02/13/2026
• Was Device Evaluated by Manufacturer? (Y/N): No
• Date Device Manufactured: 08/29/2025
• Is the Device Labeled for Single Use? (Y/N): Yes
• Is This a Single-Use Device that was Reprocessed and Reused on a Patient? (Y/N): No
• Usage of Device: Initial
• Patient Sequence Number: 1
• Outcome Attributed to Adverse Event: Required Intervention
• Patient Sex: Unknown