MAUDE Adverse Event Report: COVIDIEN SURGICAL GIA; STAPLER, SURGICAL

Model Number	GIA80MTC
Medical Device Problem Code	Break (1069)
Health Effect - Clinical Code	No Clinical Signs, Symptoms or Conditions (4582)
Date of Event	11/17/2025
Type of Reportable Event	Malfunction
Additional Manufacturer Narrative
Medtronic submits this report to comply with fda regulations 21 cfr parts 4 and 803.Medtronic has made reasonable efforts to provide as much relevant information as is available to the company as of the submission date of this report.This report does not constitute an admission or a conclusion by fda, medtronic, or its employees that the device, medtronic, or its employee caused or contributed to the event described in the report.Any required fields that are unpopulated are blank because the information is currently unknown or unavailable.Medtronic will submit a supplemental report if additional relevant information becomes known.
Event or Problem Description
It was reported that during a procedure, the instrument broke.A new device was used to resolve the issue.No patient complications have been reported as a result of this event.
Additional Manufacturer Narrative
Additional information: g3, h3, h6.H3 evaluation summary: medtronic conducted an investigation based upon all information received.The device was available for evaluation.Visual inspection noted the sulu (single use loading unit) displayed a full complement of staples.The interlock was engaged and damaged.Microscopic inspection of the knife blade displayed no damage.It was reported that the instrument broke.The reported issue was confirmed.The product analysis noted evidence that the device was not used as intended.The engaged interlock condition can occur due to improper loading of the cartridge.The damaged lockout can occur when after firing the unit the lockout engages, if the unit was unclamped and then clamped again the lockout gets caught and causes the observed damage.The manufacturing records for each device are thoroughly reviewed prior to release to ensure that it meets all medtronic quality specifications.The instructions included with this device provide the following guidance: to remove the fired sulu, separate the instrument halves.Holding the cartridge half of the instrument, grasp the proximal end of the sulu tabs and pull up and out to remove sulu for instrument.To place a new sulu into the instrument, hold the sulu by the proximal end tabs and insert into the cartridge fork at a 30 to 45 degree angle from the distal end down until unit snaps into place.Remove shipping wedge after sulu is fully loaded.Sulu will float up and down in final loaded position.When a fired instrument is opened, the lockout device will deploy.The safety lock out prevents clamping of the instrument with a cartridge that has been fired.Medtronic submits this report to comply with fda regulations 21 cfr parts 4 and 803.Medtronic has made reasonable efforts to provide as much relevant information as is available to the company as of the submission date of this report.This report does not constitute an admission or a conclusion by fda, medtronic, or its employees that the device, medtronic, or its employee caused or contributed to the event described in the report.Any required fields that are unpopulated are blank because the information is currently unknown or unavailable.Medtronic will submit a supplemental report if additional relevant information becomes known.

• Brand Name: GIA
• Common Device Name: STAPLER, SURGICAL
• Manufacturer (Section D): COVIDIEN SURGICAL; 60 middletown ave; north haven CT 06473
• Manufacturer (Section G): COVIDIEN SURGICAL; 60 middletown ave; north haven CT 06473
• Manufacturer Contact: mike bocchino ; 8200 coral sea st ne; mounds view, MN 55112-4391 ; 8006464633
• MDR Report Key: 23794516
• Report Number: 1219930-2025-05733
• Device Sequence Number: 10453306
• Product Code: GAG
• UDI-Device Identifier: 10884521723528
• UDI-Public: (01)10884521723528(17)300531(10)N5F2004UY(20)02
• Combination Product (Y/N): N
• Initial Reporter Country: VM
• PMA/510(K) Number: K221006
• Number of Events Summarized: 1
• Summary Report (Y/N): N
• Serviced by Third Party (Y/N): N
• Reporter Type: Manufacturer
• Report Source: Foreign,Health Professional,Company Representative,Distributor
• Initial Reporter Occupation: Other Health Care Professional
• Type of Report: Initial,Followup
• Report Date (Section B): 02/26/2026

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Is this an Adverse Event Report?: No
• Is this a Product Problem Report?: Yes
• Operator of Device: Health Professional
• Device Model Number: GIA80MTC
• Device Catalogue Number: GIA80MTC
• Device Lot Number: N5F2004UY
• Was Device Available for Evaluation?: Device Returned to Manufacturer
• Date Returned to Manufacturer: 12/08/2025
• Is the Reporter a Health Professional?: Yes
• Type of Report(Section G): Thirty-Day
• Initial Date Received by Manufacturer: 11/18/2025
• Supplement Date Received by Manufacturer: 02/25/2026
• Initial Report FDA Received Date: 12/12/2025
• Supplement Report FDA Received Date: 02/26/2026
• Was Device Evaluated by Manufacturer? (Y/N): Yes
• Date Device Manufactured: 06/25/2025
• Is the Device Labeled for Single Use? (Y/N): Yes
• Is This a Single-Use Device that was Reprocessed and Reused on a Patient? (Y/N): No
• Usage of Device: Initial
• Patient Sequence Number: 1
• Patient Sex: Male