MAUDE Adverse Event Report: MENTOR TEXAS MENTOR MEMORYGEL XTRA BREAST IMPLANT; PROSTHESIS, BREAST, NONINFLATABLE, INTERNAL, SILICONE GEL-FILLED

Catalog Number	SMHX310
Medical Device Problem Code	Material Rupture (1546)
Health Effect - Clinical Code	No Clinical Signs, Symptoms or Conditions (4582)
Date of Event	07/29/2025
Type of Reportable Event	Malfunction
Additional Manufacturer Narrative
Since the device has not been returned for analysis, no product failure analysis can be conducted, and no determination of possible contributing factors can be made.As such, the investigation will be closed.If the complaint device is received in the future, the investigation will be reopened and conducted as appropriate.A manufacturing record evaluation (mre) was performed, and no anomalies were found related to this complaint.In addition, the mre verifies that the device was manufactured in accordance with documented specification and procedures.Reason for device explant and/or reoperation: n/a.Mentor is submitting this report pursuant to the provisions of 21 cfr, part 803.This report may be based on information which mentor has not been able to investigate or verify prior to the required reporting date.This report does not reflect a conclusion by fda, mentor, or its employees that the report constitutes an admission that the device, mentor, or its employees caused or contributed to the potential event described in this report.If certain information is unknown, not available or does not apply, the section/field of the form is left blank.Manufacturer¿s reference number: (b)(4).
Event or Problem Description
It was reported that a 310cc mentor memorygel xtra breast implant prosthesis ruptured during a primary breast augmentation surgery.However, the surgery commenced without any reported delays and a new implant was used to complete the implantation.No adverse events or patient harms/consequences were reported.
Additional Manufacturer Narrative
On december 17, 2025, mentor completed an evaluation on an image that was provided of the suspect medical device.Photo evaluation: upon visual evaluation of the image provided in the complaint, the implant was observed ruptured.Manufacturer¿s reference number: (b)(4).
Additional Manufacturer Narrative
On january 21, 2026, the mentor failure analysis lab has received the device for evaluation.The analysis has begun but is not complete at this time.When the investigational analysis has been completed, a supplemental report will be submitted.Manufacturer¿s reference number: (b)(4).
Additional Manufacturer Narrative
On february 19, 2026, mentor completed an evaluation on the returned device.Device evaluation: mentor then conducted visual inspection and microscopic examination of the device.Visual analysis of the returned device determined that the breast implant was found to have a tear on the anterior view extending to the posterior view measuring approximately 7.1 cm.Microscopic examination was performed on the edges of the rupture, and parallel striations were found in an area of the tear on the anterior view, measuring approximately 0.1 cm.Parallel striations are consistent with markings made by a sharp object perforating the implant shell.The cause of the rupture in the remaining area of the tear could not be identified.Manufacturer¿s reference number: (b)(4).

• Brand Name: MENTOR MEMORYGEL XTRA BREAST IMPLANT
• Common Device Name: PROSTHESIS, BREAST, NONINFLATABLE, INTERNAL, SILICONE GEL-FILLED
• Manufacturer (Section D): MENTOR TEXAS; 3041 skyway circle north; irving TX 75038
• Manufacturer (Section G): MENTOR TEXAS; 3041 skyway circle north; irving TX 75038
• Manufacturer Contact: henry boden ; 3041 skyway circle north; irving, TX 75038 ; 9497882078
• MDR Report Key: 23794545
• Report Number: 1645337-2025-13872
• Device Sequence Number: 10470195
• Product Code: FTR
• UDI-Device Identifier: 10081317027826
• UDI-Public: (01)10081317027826(17)290723(10)9993954
• Combination Product (Y/N): N
• Initial Reporter Country: KS
• PMA/510(K) Number: P030053
• Number of Events Summarized: 1
• Summary Report (Y/N): N
• Serviced by Third Party (Y/N): Unknown
• Reporter Type: Manufacturer
• Report Source: Foreign,Company Representative
• Initial Reporter Occupation: Other
• Type of Report: Initial,Followup,Followup,Followup

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Is this an Adverse Event Report?: No
• Is this a Product Problem Report?: Yes
• Operator of Device: Health Professional
• Device Catalogue Number: SMHX310
• Device Lot Number: 9993954
• Was Device Available for Evaluation?: Device Returned to Manufacturer
• Is the Reporter a Health Professional?: No
• Type of Report(Section G): Follow-Up
• Initial Date Received by Manufacturer: 11/17/2025
• Supplement Date Received by Manufacturer: 12/17/2025; 01/21/2026; 02/19/2026
• Initial Report FDA Received Date: 12/12/2025
• Supplement Report FDA Received Date: 01/03/2026; 02/13/2026; 02/27/2026
• Was Device Evaluated by Manufacturer? (Y/N): Yes
• Date Device Manufactured: 07/24/2024
• Is the Device Labeled for Single Use? (Y/N): Yes
• Is This a Single-Use Device that was Reprocessed and Reused on a Patient? (Y/N): No
• Usage of Device: Initial
• Patient Sequence Number: 1
• Patient Sex: Unknown