MAUDE Adverse Event Report: ALCON RESEARCH, LLC - HUNTINGTON ACRYSOF IQ SINGLEPIECE IOL WITH ULTRASERT DELIVERY SYSTEM; LENS, GUIDE, INTRAOCULAR

Model Number	AU00T0
Medical Device Problem Code	Scratched Material (3020)
Health Effect - Clinical Code	No Clinical Signs, Symptoms or Conditions (4582)
Date of Event	11/20/2025
Type of Reportable Event	Malfunction
Additional Manufacturer Narrative
The company specific device was not returned for evaluation.A photo was provided of an implanted lens.An area was indicated with a yellow circle.A scrape mark was visible near the optic edge.This type of damage may occur with inadequate viscoelastic and/or with rapid advancement.A root cause cannot be determined without physical evaluation of the device.A device history record review and a non-conformance review of the reported lot number was conducted.The deviation review did not reveal any potential contributing factors to the reported complaint and all corresponding production release specifications defined in the device master record were met.A qualified viscoelastic was indicated.The root cause for the reported event could not be determined.The company specific device was discarded by the reporting facility.Based on review of the provided photo, a scrape mark was visible near the optic edge.This type of damage may occur with inadequate viscoelastic and/or with rapid advancement.The ifu (instructions for use) instructs: fully insert the ovd (ophthalmic viscosurgical device) cannula, perpendicular to the device, through the viscoelastic port, located in the lens stop portion of the device.Fill the device until ovd can be observed flowing to the ¿fill-to¿ line on the nozzle tip.This will require approximately 0.2 ml of ovd.Only use a company ovd qualified for use with the company specific pre-loaded delivery system that has been allowed to come to the operating room temperature.If inadequate viscoelastic is placed in the device this will cause inadequate coverage of the lens fold path which may cause the lens to advance incorrectly or become ¿stuck¿ in the device.The ifu instructs: take at least 7 seconds to gently fold the iol (intraocular lens) by advancing the plunger forward in one smooth, continuous motion until the front edge of the optic is even with the ¿fill-to¿ line on the nozzle.Do not allow any portion of the lens to exit the nozzle tip.At this position the blue spring will contact the clear main body.It is important to not advance the plunger abruptly to fold the iol as improper folding and lens damage may occur.The ifu instructs: after the lens has been advanced to the nozzle line, the lens should be visually inspected to determine the position of the haptics.The plunger should be in contact with the trailing optic edge.After confirming the lens is properly positioned and the haptics are folded properly, proceed with lens implantation.Proceeding with implantation of a misfolded haptic or a lens that appears to be ¿out of position¿ can result in a broken haptic or other negative outcome, since the haptic may be trapped and stretched, and/or pinched and sheared by the moving plunger.The manufacturer internal reference number is: (b)(4).
Event or Problem Description
A healthcare professional reported that during an intraocular lens (iol) implant procedure, the surgeon noticed scratch mark on the lens after implantation.The lens was left implanted.There was no patient harm.Additional information was requested.

• Brand Name: ACRYSOF IQ SINGLEPIECE IOL WITH ULTRASERT DELIVERY SYSTEM
• Common Device Name: LENS, GUIDE, INTRAOCULAR
• Manufacturer (Section D): ALCON RESEARCH, LLC - HUNTINGTON; 246 kyle lane; huntington WV 25702
• Manufacturer (Section G): ALCON RESEARCH, LLC - HUNTINGTON; 246 kyle lane; huntington WV 25702
• Manufacturer Contact: jonathan schlech ; 6201 south freeway; mail stop ab2-6; fort worth, TX 76134 ; 8007579780
• MDR Report Key: 23827178
• Report Number: 1119421-2025-03167
• Device Sequence Number: 15775061
• Product Code: KYB
• UDI-Device Identifier: 00380652394758
• UDI-Public: (01)00380652394758(17)280315(11)250317(10)16010722
• Combination Product (Y/N): N
• Initial Reporter Country: AU
• PMA/510(K) Number: P930014
• Number of Events Summarized: 1
• Summary Report (Y/N): N
• Device Implanted Year: 2025
• Reporter Type: Manufacturer
• Report Source: Foreign,Health Professional,Company Representative
• Initial Reporter Occupation: Other Health Care Professional
• Type of Report: Initial
• Report Date (Section B): 12/17/2025

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Is this an Adverse Event Report?: No
• Is this a Product Problem Report?: Yes
• Operator of Device: Health Professional
• Device Model Number: AU00T0
• Device Lot Number: 16010722
• Was Device Available for Evaluation?: No
• Is the Reporter a Health Professional?: Yes
• Type of Report(Section G): Initial
• Initial Date Received by Manufacturer: 11/25/2025
• Initial Report FDA Received Date: 12/17/2025
• Date Device Manufactured: 03/17/2025
• Is This a Single-Use Device that was Reprocessed and Reused on a Patient? (Y/N): No
• Usage of Device: Initial
• Patient Sequence Number: 1
• Concomitant Medical Products and Therapy/Usage Dates: PROVISC OPHTHALMIC VISCOSURGICAL DEVICE
• Patient Sex: Unknown