MAUDE Adverse Event Report: JJGC S.A. Gm Zygomatic Implant, Ti, 4.0x45; Endosseous Dental Implant

Catalog Number	109.1054
Medical Device Problem Codes	Fracture (1260); Adverse Event Without Identified Device or Use Problem (2993)
Health Effect - Clinical Code	No Clinical Signs, Symptoms or Conditions (4582)
Date of Event	11/17/2025
Type of Reportable Event	Serious Injury
Event or Problem Description
The clinician reports the implant was inserted (b)(6) 2025 in the patient's mouth.On (b)(6) 2025 fracture of the implant was verified.No product was returned to the manufacturer.There were no patient operative or post-operative complications reported.
Additional Manufacturer Narrative
The batch number could be verified.Our manufacturing q-system assures, that production and process controls are in place to ensure that batches confirm to the applicable specifications before they are distributed.The fracture of a dental implant is a known long-term complication of endosseous dental implants.The manufacturers trend analysis confirms that the reported implant fracture rate associated with its dental implants is low and remains consistent with the experience as documented in the literature.There are different reasons why implants break and this problem has been illuminated by various authors (e.G.Maeglin 1988, beumer 1989, tetsch 1991, worthington 1992).Beumer and lewis 1989 report the following causes: a) production / design flaws b) inadequate fitting of the suprastructure c) occlusal overload d) bruxism e) bone resorption around the implants f) insufficient axle alignment of the implants g) trauma h) biomechanical causes i) design of the suprastructure.
Additional Manufacturer Narrative
The batch number could be verified.Our manufacturing q-system assures, that production and process controls are in place to ensure that batches confirm to the applicable specifications before they are distributed.The fracture of a dental implant is a known long-term complication of endosseous dental implants.The manufacturers trend analysis confirms that the reported implant fracture rate associated with its dental implants is low and remains consistent with the experience as documented in the literature.There are different reasons why implants break and this problem has been illuminated by various authors (e.G.Maeglin 1988, beumer 1989, tetsch 1991, worthington 1992).Beumer and lewis 1989 report the following causes: a) production / design flaws b) inadequate fitting of the suprastructure c) occlusal overload d) bruxism e) bone resorption around the implants f) insufficient axle alignment of the implants g) trauma h) biomechanical causes i) design of the suprastructure non-fatal serious injury or device malfunction stored due to covid 19 pandemic in accordance with fda guidance "postmarketing adverse event reporting for medical products and dietary supplements during a pandemic" published may 2020.
Event or Problem Description
The clinician reports the implant was inserted(b)(6) 2025 in the patient's mouth.On (b)(6)2025, fracture of the implant was verified.The device was forwarded to the manufacturer.There were no patient operative or post-operative complications reported.
Event or Problem Description
The clinician reports that the day the implant was placed in the patient's mouth, failure occurred upon insertion.The device was forwarded to the manufacturer.There were no reported patient injuries or complications.
Additional Manufacturer Narrative
The batch number could be verified.Our manufacturing q-system assures, that production and process controls are in place to ensure that batches confirm to the applicable specifications before they are distributed.? the removal of a dental implant during surgery without the replacement of another dental implant is a known inherent risk of the procedure due to either lack of primary stability of the implant (patienor procedure related).It may also include the removal of an implant after osseointegration due to either the clinician's or patient¿s decision.The manufacturer¿s trend analysis confirms that usually procedural errors and/or patient's condition contribute to the event.Non-fatal serious injury or device malfunction stored due to covid 19 pandemic in accordance with fda guidance "postmarketing adverse event reporting for medical products and dietary supplements during a pandemic" published may 2020.

• Brand Name: Gm Zygomatic Implant, Ti, 4.0x45
• Common Device Name: Endosseous Dental Implant
• Manufacturer (Section D): JJGC S.A.; av. juscelino kubitschek de; oliveira, 3291 cic; curitiba PR 81270 -200; BR 81270-200
• Manufacturer (Section G): JJGC S.A.; av. juscelino kubitschek de; oliveira, 3291 cic; curitiba PR 81270 -200; BR 81270-200
• Manufacturer Contact: jennifer jackson ; 60 minuteman road; andover, MA 01810 ; +1(978)747-2509
• MDR Report Key: 23880905
• Report Number: 3008261720-2025-005290
• Device Sequence Number: 17326456
• Product Code: DZE
• Combination Product (Y/N): N
• Initial Reporter Country: IN
• PMA/510(K) Number: K190718
• Summary Report (Y/N): N
• Device Implanted Year: 2025
• Device Explanted Year: 2025
• Serviced by Third Party (Y/N): N
• Reporter Type: Manufacturer
• Report Source: Foreign,Health Professional
• Initial Reporter Occupation: Dentist
• Type of Report: Initial,Followup,Followup
• Report Date (Section B): 09/21/2026

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Is this an Adverse Event Report?: Yes
• Is this a Product Problem Report?: No
• Operator of Device: Health Professional
• Device Catalogue Number: 109.1054
• Device Lot Number: PYP60
• Was Device Available for Evaluation?: Yes
• Date Returned to Manufacturer: 11/26/2025
• Is the Reporter a Health Professional?: Yes
• Was the Report Sent to FDA?: No
• Event Location: Other
• Type of Report(Section G): Thirty-Day
• Initial Date Received by Manufacturer: Not provided
• Supplement Date Received by Manufacturer: Not provided; 09/24/2026
• Initial Report FDA Received Date: 12/23/2025
• Supplement Report FDA Received Date: 02/26/2026; 09/24/2026
• Was Device Evaluated by Manufacturer? (Y/N): Yes
• Date Device Manufactured: 12/14/2022
• Is the Device Labeled for Single Use? (Y/N): Yes
• Is This a Single-Use Device that was Reprocessed and Reused on a Patient? (Y/N): No
• Usage of Device: Initial
• Patient Sequence Number: 1
• Outcome Attributed to Adverse Event: Required Intervention
• Patient Sex: Male