MAUDE Adverse Event Report: ALCON RESEARCH, LLC - ALCON PRECISION DEVICE CLEARCUT INTREPID KNIVES; KNIFE, OPHTHALMIC

Catalog Number	8065992245
Medical Device Problem Code	Dull, Blunt (2407)
Health Effect - Clinical Code	No Clinical Signs, Symptoms or Conditions (4582)
Date of Event	12/18/2025
Type of Reportable Event	Malfunction
Event or Problem Description
A nurse reported that during the cataract surgery with intraocular lens implantation an ophthalmic cutting knife from the different batch numbers were found to be dull.The surgery was completed on the same day without any patient impact.
Additional Manufacturer Narrative
Investigation including root cause analysis is in progress.A supplemental mdr will be filed as necessary in accordance with 21 cfr 803.56 when additional reportable information becomes available.The manufacturer internal reference number is: (b)(4).H.10 reflects all related report numbers associated with this product event that have been submitted at this time.
Additional Manufacturer Narrative
A sample was not received at the manufacturing site for evaluation for the report of knives blunt; therefore, the condition of the product could not be verified.A review of the device history record traceable to the reported lot number, indicates that the reported product was processed and released according to the reported product¿s acceptance criteria.The investigation conducted a non-conformance review of the reported lot number.No deviations were identified and all corresponding production release specifications defined in the device master record were met.Based on the evaluation of the information received, the investigation was unable to identify the root cause or origin of the reported event.Additionally, no manufacturing-related deficiencies were found that potentially could have contributed to the complaint.As the root cause and its origin are inconclusive, further investigative or manufacturing actions are not warranted at this time.All knives are 100% inspected by trained operators using a minimum of 10x magnification during manufacturing.Functional penetration testing is performed and monitored during the finishing process to ensure the sharpness of the product.Receipt of additional relevant information or supporting materials will prompt a re-evaluation of the complaint investigation.Complaint data for all manufacturer products is reviewed monthly to monitor for adverse trends.During the last review, no adverse trends were observed for the reported product and event combination.Quality assurance has reviewed this complaint and will continue to monitor data for evidence of adverse trending and take further action, as appropriate.No further action warranted at this time.The manufacturer internal reference number is: (b)(4).H.10 reflects all related report numbers associated with this product event that have been submitted at this time.
Additional Manufacturer Narrative
Additional information provided in sections d.9, h.3, h.6 and h.11 one opened slit knife was received for the report of knives blunt.Sample was visually inspected and found to be nonconforming with a bent tip.Penetration testing could not be performed due to the damage of the sample.A review of the device history record traceable to the reported lot number, indicates that the reported product was processed and released according to the reported product¿s acceptance criteria.The investigation conducted a non-conformance review of the reported lot number.No deviations were identified and all corresponding production release specifications defined in the device master record were met.The returned sample is visually non-conforming with a bent tip.The damage to the returned sample is consistent with damage that can occur when the blade contacts a hard surface such as the protective blade tray when product is improperly removed or inserted after use, or improper handling, or contact with another instrument during surgery or set-up.The damage seen on the returned complaint sample could have contributed to the customers reported issue of knives blunt.Based on the evaluation of the information and materials received, the investigation was unable to identify the root cause or origin of the reported event.Additionally, no manufacturing-related deficiencies were found that potentially could have contributed to the complaint.As the root cause and its origin are inconclusive, further investigative or manufacturing actions are not warranted at this time.All knives are 100% visually inspected by trained operators using a minimum of 10x magnification during manufacturing.Functional penetration testing is performed and monitored during the finishing process to ensure the sharpness of the product.Receipt of additional relevant information or supporting materials will prompt a re-evaluation of the complaint investigation.Complaint data for all manufacturer products is reviewed monthly to monitor for adverse trends.During the last review, no adverse trends were observed for the reported product and event combination.Quality assurance has reviewed this complaint and will continue to monitor data for evidence of adverse trending and take further action, as appropriate.No further action warranted at this time.The manufacturer internal reference number is: (b)(4).H.10 reflects all related report numbers associated with this product event that have been submitted at this time.

• Brand Name: CLEARCUT INTREPID KNIVES
• Common Device Name: KNIFE, OPHTHALMIC
• Manufacturer (Section D): ALCON RESEARCH, LLC - ALCON PRECISION DEVICE; 714 columbia avenue; sinking spring PA 19608
• Manufacturer (Section G): ALCON RESEARCH, LLC - ALCON PRECISION DEVICE; 714 columbia avenue; sinking spring PA 19608
• Manufacturer Contact: jonathan schlech ; 6201 south freeway; mail stop ab2-6; fort worth, TX 76134 ; 8007579780
• MDR Report Key: 23932256
• Report Number: 2523835-2025-01363
• Device Sequence Number: 18548350
• Product Code: HNN
• UDI-Device Identifier: 00380659922459
• UDI-Public: (01)00380659922459(17)300228(11)250317(10)17AC6W
• Combination Product (Y/N): N
• Initial Reporter Country: CH
• PMA/510(K) Number: EXEMPT
• Number of Events Summarized: 1
• Summary Report (Y/N): N
• Reporter Type: Manufacturer
• Report Source: Foreign,Health Professional,Company Representative
• Initial Reporter Occupation: Nurse
• Type of Report: Initial,Followup,Followup
• Report Date (Section B): 05/20/2026

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Is this an Adverse Event Report?: No
• Is this a Product Problem Report?: Yes
• Operator of Device: Health Professional
• Device Catalogue Number: 8065992245
• Device Lot Number: 17AC6W
• Was Device Available for Evaluation?: Device Returned to Manufacturer
• Is the Reporter a Health Professional?: Yes
• Type of Report(Section G): Initial
• Initial Date Received by Manufacturer: 12/22/2025
• Supplement Date Received by Manufacturer: 03/22/2026; 05/15/2026
• Initial Report FDA Received Date: 12/31/2025
• Supplement Report FDA Received Date: 04/06/2026; 05/20/2026
• Was Device Evaluated by Manufacturer? (Y/N): Yes
• Date Device Manufactured: 03/17/2025
• Is This a Single-Use Device that was Reprocessed and Reused on a Patient? (Y/N): No
• Usage of Device: Initial
• Patient Sequence Number: 1
• Patient Sex: Unknown