MAUDE Adverse Event Report: MEDTRONIC XOMED INC. IPC® HANDPIECE - INDIGO¿ DRILL; DRILLS, BURRS, TREPHINES & ACCESSORIES (SIMPLE

Model Number	1845000
Medical Device Problem Code	Overheating of Device (1437)
Health Effect - Clinical Code	No Clinical Signs, Symptoms or Conditions (4582)
Date of Event	12/09/2025
Type of Reportable Event	Malfunction
Event or Problem Description
It was reported that during surgery, the device was overheating.There was no patient impact in this event.
Additional Manufacturer Narrative
H3: analysis results were not available as of the date of this report.A follow-up report will be submitted when analysis is complete.Medtronic submits this report to comply with fda regulations 21 cfr parts 4 and 803.Medtronic has made reasonable efforts to provide as much relevant information as is available to the company as of the submission date of this report.This report does not constitute an admission or a conclusion by fda, medtronic, or its employees that the device, medtronic, or its employee caused or contributed to the event described in the report.Any required fields that are unpopulated are blank because the information is currently unknown or unavailable.Medtronic will submit a supplemental report if additional relevant information becomes known.
Additional Manufacturer Narrative
H3: product analysis could not confirmed the reported fault.Pre-repair temperature results after 1 min running, t1: 96.8°f and t2:97.9°f.However, the drill motor assembly found to be grinding and heating up within in the range.H6: codes updated.Previous applied fdm b21, fdr c21, fdc d16, img g04063 codes are not applicable.Product analysis shows that pre-repair temperature results are with in range, there is no information to reasonably suggest that the device in this report may have caused or contributed to a death or serious injury or that the device in this report has malfunctioned.Therefore, this event did not and does not meet the reporting requirements stipulated in 21 cfr 803.Medtronic submits this report to comply with fda regulations 21 cfr parts 4 and 803.Medtronic has made reasonable efforts to provide as much relevant information as is available to the company as of the submission date of this report.This report does not constitute an admission or a conclusion by fda, medtronic, or its employees that the device, medtronic, or its employee caused or contributed to the event described in the report.Any required fields that are unpopulated are blank because the information is currently unknown or unavailable.Medtronic will submit a supplemental report if additional relevant information becomes known.

• Brand Name: IPC® HANDPIECE - INDIGO¿ DRILL
• Common Device Name: DRILLS, BURRS, TREPHINES & ACCESSORIES (SIMPLE
• Manufacturer (Section D): MEDTRONIC XOMED INC.; 6743 southpoint dr n; jacksonville FL 32216
• Manufacturer (Section G): MEDTRONIC XOMED INC.; 6743 southpoint dr n; jacksonville FL 32216
• Manufacturer Contact: justin ellis ; 6743 southpoint drive north; jacksonville, FL 32216 ; 7635265677
• MDR Report Key: 23941215
• Report Number: 1045254-2026-00004
• Device Sequence Number: 7845222
• Product Code: HBE
• UDI-Device Identifier: 00613994933713
• UDI-Public: (01)00613994933713(11)160216
• Combination Product (Y/N): N
• Initial Reporter Country: AS
• PMA/510(K) Number: K081475
• Number of Events Summarized: 1
• Summary Report (Y/N): N
• Reporter Type: Manufacturer
• Report Source: Foreign,Company Representative
• Initial Reporter Occupation: Other Health Care Professional
• Type of Report: Initial,Followup
• Report Date (Section B): 03/23/2026

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Is this an Adverse Event Report?: No
• Is this a Product Problem Report?: Yes
• Operator of Device: Health Professional
• Device Model Number: 1845000
• Device Catalogue Number: 1845000
• Was Device Available for Evaluation?: Device Returned to Manufacturer
• Date Returned to Manufacturer: 12/17/2025
• Is the Reporter a Health Professional?: Yes
• Type of Report(Section G): Thirty-Day
• Initial Date Received by Manufacturer: 12/09/2025
• Supplement Date Received by Manufacturer: 03/03/2026
• Initial Report FDA Received Date: 01/02/2026
• Supplement Report FDA Received Date: 03/23/2026
• Was Device Evaluated by Manufacturer? (Y/N): Yes
• Date Device Manufactured: 02/16/2016
• Is the Device Labeled for Single Use? (Y/N): No
• Is This a Single-Use Device that was Reprocessed and Reused on a Patient? (Y/N): No
• Usage of Device: Reuse
• Patient Sequence Number: 1
• Patient Sex: Unknown