| Catalog Number |
G136 |
| Medical Device Problem Codes |
Restricted Flow rate (1248); No Flow (2991)
|
| Health Effect - Clinical Code |
No Clinical Signs, Symptoms or Conditions (4582)
|
|
Type of Reportable Event
|
Malfunction
|
|
Additional Manufacturer Narrative
|
|
There has been a previous report received where lack of water flow has caused an overheating insert.Since an overheating insert could necessitate medical/surgical intervention to preclude permanent damage to a body structure or permanent impairment of a body function, this malfunction would be likely to cause/contribute to a serious injury should it recur.As such, this event meets the criteria for reportability per 21 cfr part 803.
|
| |
|
Event or Problem Description
|
|
While using a cavitron plus g136, they allege that they have no water flow and the handpiece is heating up; no injury resulted.
|
| |
|
Additional Manufacturer Narrative
|
|
Notes: 01/15/26.(b)(4).Hp cable # 09250 new 10250.Jmate/sterimate # n/a.W2e reg, needle valve, hp flow cntrl clogged.Poor water flow due to a clog in the handpiece cable.Replaced worn/damaged parts and recalibrated to the manufacturing specifications qa: (b)(4).Dhr review is not required because the product was returned for evaluation, and the described failure mode is a known hazard.
|
| |
|
Search Alerts/Recalls
|