MAUDE Adverse Event Report: SYNTHES GMBH COLLINEAR REDUCTION CLAMP SLIDING MECHAN; FORCEPS

Catalog Number	314.291
Medical Device Problem Codes	Device-Device Incompatibility (2919); Material Twisted/Bent (2981)
Health Effect - Clinical Code	No Clinical Signs, Symptoms or Conditions (4582)
Date of Event	12/19/2025
Type of Reportable Event	Malfunction
Additional Manufacturer Narrative
Depuy synthes is submitting this report pursuant to the provisions of 21 cfr, part 803.This report may be based on information which depuy synthes has not been able to investigate or verify prior to the required reporting date.This report does not reflect a conclusion by fda, depuy synthes or its employees that the report constitutes an admission that the device, depuy synthes, or its employees caused or contributed to the potential event described in this report.If the information is unknown, not available or does not apply, the section/field of the form is left blank.H11 additional narrative: corrected: g1.H6: the product was not returned to depuy synthes; however, photos were provided for review.The photo investigation revealed that collinear reduction clamp sliding mechanism, had crack and stripped.The observed condition of the device was consistent with a component failure that was caused by exposure to unintended forces like usage of excessive force in a prying motion while trialing.The provided evidence was not sufficient to confirm the reported event of unable to assemble/disassemble.Functionality issues cannot be evaluated through a photo investigation.Since the device was not returned, a dimensional inspection cannot be performed.The overall complaint was confirmed as the observed condition of the collinear reduction clamp sliding mechan would contribute to the complained device issue.Based on the investigation findings, potential cause attributed to component failure it has been determined that no corrective and/or preventative action is proposed.There is no indication that a design or manufacturing issue has caused the complaint condition.As part of depuy synthes quality process, all devices are manufactured, inspected, and released to approved specifications.Additional monitoring for any potential safety signals will be conducted through complaint trending and other post-market safety surveillance activities.Device history lot: part:314.291.Lot: 170527-901.Manufacturing site: werk selzach.Supplier: (b)(4).Release to warehouse date: 20 apr 2018.Expiration date: na.A manufacturing record evaluation was performed for the finished article lot and no non-conformances were identified.If information is obtained that was not available for the initial medwatch, a follow-up medwatch will be filed as appropriate.
Additional Manufacturer Narrative
Product complaint#: (b)(4).This report is being submitted pursuant to the provisions of 21 cfr, part 803 (and/or part 4, as applicable).This report may be based on information which has not been investigated or verified prior to the required reporting date.This report does not reflect a conclusion by depuy synthes, or its employees that the report constitutes an admission that the product, depuy synthes, or its employees caused or contributed to the potential event described in this report.If information is obtained that was not available for the initial report, a follow-up report will be filed as appropriate.
Event or Problem Description
It was reported that when validating the equipment before sending it to the institution and when mounting the collinear gripper, it was observed that the hook presents resistance when mounted; once mounted, it is not possible to separate it from the clamp.

• Brand Name: COLLINEAR REDUCTION CLAMP SLIDING MECHAN
• Common Device Name: FORCEPS
• Manufacturer (Section D): SYNTHES GMBH; eimattstrasse 3; oberdorf 4436 ; SZ 4436
• Manufacturer (Section G): SYNTHES SELZACH; bohackerweg 5; selzach 4434 ; SZ 4434
• Manufacturer Contact: elba bello ; 1302 wright lane east; west chester, PA 19380 ; 9083863534
• MDR Report Key: 24019787
• Report Number: 8030965-2026-00290
• Device Sequence Number: 16089487
• Product Code: HTD
• UDI-Device Identifier: 07611819280595
• UDI-Public: (01)07611819280595(10)170527-901
• Combination Product (Y/N): N
• Initial Reporter Country: CO
• PMA/510(K) Number: EXEMPT
• Number of Events Summarized: 1
• Summary Report (Y/N): N
• Serviced by Third Party (Y/N): Unknown
• Reporter Type: Manufacturer
• Report Source: Foreign,Health Professional
• Initial Reporter Occupation: Other Health Care Professional
• Type of Report: Initial,Followup

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Is this an Adverse Event Report?: No
• Is this a Product Problem Report?: Yes
• Operator of Device: Health Professional
• Device Catalogue Number: 314.291
• Device Lot Number: 170527-901
• Was Device Available for Evaluation?: No
• Is the Reporter a Health Professional?: Yes
• Type of Report(Section G): Initial
• Initial Date Received by Manufacturer: 12/19/2025
• Supplement Date Received by Manufacturer: 01/15/2026
• Initial Report FDA Received Date: 01/09/2026
• Supplement Report FDA Received Date: 01/19/2026
• Was Device Evaluated by Manufacturer? (Y/N): No
• Date Device Manufactured: 04/20/2018
• Is the Device Labeled for Single Use? (Y/N): Yes
• Is This a Single-Use Device that was Reprocessed and Reused on a Patient? (Y/N): No
• Usage of Device: Unknown
• Patient Sequence Number: 1
• Patient Sex: Unknown