|
|
| Model Number |
1040005 |
| Medical Device Problem Codes |
Circuit Failure (1089); Mechanical Problem (1384); Failure to Calibrate (2440)
|
| Health Effect - Clinical Code |
No Clinical Signs, Symptoms or Conditions (4582)
|
| Date of Event |
01/07/2026
|
|
Type of Reportable Event
|
Malfunction
|
|
Event or Problem Description
|
|
A ventilator was returned to the manufacturer for service.There was no serious patient harm or injury that occurred or was reported.The device was not in patient use.During the evaluation of the device at the manufacturer's service center, the device failed the o2 low flow test step during testing.The device's active exhalation controller was replaced to address the issue.Additionally, unrelated to the test failure, the device was found to have the cord retainer missing/broken and had missing/displaced rubber feet.Cord retainer and rubber feet replaced.Also, exterior damage was found to the front, rear, and base enclosures.Enclosures replaced.
|
| |
|
Additional Manufacturer Narrative
|
|
The manufacturer previously reported that a ventilator was returned to the manufacturer for service.There was no serious patient harm or injury that occurred or was reported.The device was not in patient use.During the evaluation of the device at the manufacturer's service center, the device failed the o2 low flow test step during testing.The device's active exhalation controller was replaced to address the issue.Additionally, unrelated to the test failure, the device was found to have the cord retainer missing/broken and had missing/displaced rubber feet.Cord retainer and rubber feet replaced.Also, exterior damage was found to the front, rear, and base enclosures.Enclosures replaced.The device was retested and the device failed the differential pressure step during testing.The device's sensor board was replaced to address the issue.
|
| |
|
Search Alerts/Recalls
|
|
|