|
(b)(4).Date sent: 1/16/2026.D4: batch#: unk.Attempts have been made to retrieve the device.To date the device has not been returned.If the device or further details are received at a later date a supplemental medwatch will be sent.A manufacturing record evaluation was performed for the finished device lot number, and no non-conformance were identified.Additional information was requested and the following was obtained: 1.Was there difficulty opening the packaging material (difficulty removing/peeling back the tyvek)? no.2.Could you please identify the packaging (shipping box, primary packaging, box, pouch seal, or the plastic bag)? pouch seal.3.Could you please clarify the type of damage found (broken, packaging was worn, bent, ragged, containing cut or slit, or appear ripped)? unknown.This report is being submitted pursuant to the provisions of 21 cfr, part 803.This report may be based on information which has not been investigated or verified prior to the required reporting date.This report does not reflect a conclusion by ethicon, or its employees that the report constitutes an admission that the product, ethicon, or its employees caused or contributed to the potential event described in this report.If information is obtained that was not available for the initial report, a follow-up report will be filed as appropriate.
|
|
(b)(4).Date sent: 2/17/2026.Investigation summary : the product was returned to ees for evaluation.Visual inspection and functional testing were conducted on the returned device.Visual analysis of the returned sample determined that the b5st device was returned outside it's packaging opened with no apparent damage.Upon visual inspection, it was observed that the tyvek from the packaging was damaged.The sterility was not compromised.As part of ees quality process all devices are manufactured, inspected, and released to approved specifications.Although no conclusion could be reach on the cause of the reported event.Device history review a manufacturing record evaluation was performed for the finished device lot 639d64 number, and no non-conformances were identified.
|