MAUDE Adverse Event Report: SYNTHES GMBH SMALL HEXAGONAL SCRDRIVER HOLDING SLV; SCREWDRIVER

Catalog Number	314.02
Medical Device Problem Code	Contamination /Decontamination Problem (2895)
Health Effect - Clinical Code	No Clinical Signs, Symptoms or Conditions (4582)
Date of Event	01/05/2026
Type of Reportable Event	Malfunction
Event or Problem Description
It was reported the screwdriver handles are leaving stains on peel packs during sterilization, the tip of depth gauge broke during cleaning and screwdriver shaft is worn out.Event was noted during sterile processing and field inspection.No patient involvement.
Additional Manufacturer Narrative
Product complaint # (b)(4).This report is being submitted pursuant to the provisions of 21 cfr, part 803 (and/or part 4, as applicable).This report may be based on information which has not been investigated or verified prior to the required reporting date.This report does not reflect a conclusion by depuy synthes, or its employees that the report constitutes an admission that the product, depuy synthes, or its employees caused or contributed to the potential event described in this report.Additional narrative: d4: udi: as the lot number for the device involved in the event was not provided, the full udi is currently not available.If information is obtained that was not available for the initial medwatch, a follow-up medwatch will be filed as appropriate.
Additional Manufacturer Narrative
Depuy synthes is submitting this report pursuant to the provisions of 21 cfr, part 803.This report may be based on information which depuy synthes has not been able to investigate or verify prior to the required reporting date.This report does not reflect a conclusion by fda, depuy synthes or its employees that the report constitutes an admission that the device, depuy synthes, or its employees caused or contributed to the potential event described in this report.If the information is unknown, not available or does not apply, the section/field of the form is left blank.H11 additional narrative: corrected: g1.H3, h6: the product was returned to depuy synthes for evaluation.The depuy synthes team conducted a visual inspection of the returned device.Visual analysis of the returned sample revealed that small hexagonal scrdriver holding slv was worn out after years of use.Cracked condition was observed around the pin and the handle was broken at the proximal part and the shaft was noted with general corrosion.In addition, the holding sleeve and fragments of the handle were not received for evaluation.A dimensional inspection for the small hexagonal scrdriver holding slv was not performed due to post manufacturing damage.The observed cracked and broken conditions of the device was consistent with a random component failure that may have been caused by exposure to unintended forces.Worn condition was identified as an end of life indicator; damage consistent with repeated use and servicing.The lifecycle requirements of the device are event related and depend on the use and inspection of the device in clinical practice.As the device can be damaged on the first or 100th use, the device must be properly inspected prior to each surgical use.Refer to the device/country specific ifu for information related to end of life, reprocessing instructions, and inspection procedures.Corrosion: the potential cause is being attributed to cleaning/sterilization methods.As per se_023827 rev ap, during cleaning, only use cleaning agents that are labelled for use on medical devices and in accordance with the manufacturer¿s instructions (e.G.Temperature, contact time, and rinse time).Cleaning agents with a used dilution ph of within 7¿9.5 are recommended.Highly alkaline conditions (ph >11) can damage components/devices, such as aluminum materials.Do not use saline, environmental disinfection (including chlorine solutions) or surgical antiseptics (such as iodine- or chlorhexidine-containing products).Do not use a cleaning aid that can damage the surface of instruments such as steel wool, abrasive cleaners or wire brushes missing components: this condition may occur during the cleaning/sterilization process, particularly when the components are assembled or disassembled.As these procedures are often repeated, there is an increased risk of components going missing.However, without concrete evidence or further information, it is not possible to determine a root cause.A functional test was not performed as it is not applicable to the complaint condition.The overall complaint was confirmed as the observed condition of the small hexagonal scrdriver holding slv would contribute to the complained device issue.Based on the investigation findings, it has been determined that no corrective and/or preventative action is proposed.As part of depuy synthes quality process, all devices are manufactured, inspected, and released to approved specifications.There is no indication that a design or manufacturing issue has caused the complaint condition.Additional monitoring for any potential safety signals will be conducted through complaint trending and other post-market safety surveillance activities.Device history lot: part: 314.020, lot: 2164753, manufacturing site: bettlach, release to warehouse date: 15.Nov.2005.A manufacturing record evaluation was performed for the finished device lot number, and no non-conformances were identified.Note: dhr information was retrieved from (b)(4) as it is the same lot number.If information is obtained that was not available for the initial medwatch, a follow-up medwatch will be filed as appropriate.
Additional Manufacturer Narrative
Depuy synthes is submitting this report pursuant to the provisions of 21 cfr, part 803.This report may be based on information which depuy synthes has not been able to investigate or verify prior to the required reporting date.This report does not reflect a conclusion by fda, depuy synthes or its employees that the report constitutes an admission that the device, depuy synthes, or its employees caused or contributed to the potential event described in this report.If the information is unknown, not available or does not apply, the section/field of the form is left blank.H11 additional narrative: h3, h6: product was not returned.Based on the information available, it has been determined that no corrective and preventative action is proposed.This complaint will be accounted for and monitored via post market surveillance activities.If additional information is made available, the investigation will be updated as applicable if information is obtained that was not available for the initial medwatch, a follow-up medwatch will be filed as appropriate.
Additional Manufacturer Narrative
Depuy synthes is submitting this report pursuant to the provisions of 21 cfr, part 803.This report may be based on information which depuy synthes has not been able to investigate or verify prior to the required reporting date.This report does not reflect a conclusion by fda, depuy synthes or its employees that the report constitutes an admission that the device, depuy synthes, or its employees caused or contributed to the potential event described in this report.H11 additional narrative: added: d4 lot, d9 corrected: d4 primary udi number the device was received, the investigation is in progress, no conclusion could be drawn at the time of filing this report.If information is obtained that was not available for the initial medwatch, a follow-up medwatch will be filed as appropriate.

• Brand Name: SMALL HEXAGONAL SCRDRIVER HOLDING SLV
• Common Device Name: SCREWDRIVER
• Manufacturer (Section D): SYNTHES GMBH; luzernstrasse 19-21; zuchwil 4528 ; SZ 4528
• Manufacturer (Section G): WERK BETTLACH (CH); muracherstrasse 3; bettlach CO ; SZ
• Manufacturer Contact: elba bello ; 1302 wright lane east; west chester, PA 19380 ; 9083863534
• MDR Report Key: 24120538
• Report Number: 8030965-2026-00661
• Device Sequence Number: 5941369
• Product Code: HXX
• UDI-Device Identifier: 10886982188373
• UDI-Public: (01)10886982188373(10)2164753
• Combination Product (Y/N): N
• Initial Reporter Country: CA
• PMA/510(K) Number: EXEMPT
• Number of Events Summarized: 1
• Summary Report (Y/N): N
• Serviced by Third Party (Y/N): Unknown
• Reporter Type: Manufacturer
• Report Source: Foreign,Health Professional
• Initial Reporter Occupation: Other Health Care Professional
• Type of Report: Initial,Followup,Followup,Followup

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Is this an Adverse Event Report?: No
• Is this a Product Problem Report?: Yes
• Operator of Device: Health Professional
• Device Catalogue Number: 314.02
• Device Lot Number: 2164753
• Was Device Available for Evaluation?: Device Returned to Manufacturer
• Is the Reporter a Health Professional?: Yes
• Type of Report(Section G): Follow-Up
• Initial Date Received by Manufacturer: 01/06/2026
• Supplement Date Received by Manufacturer: 02/13/2026; 03/10/2026; 03/20/2026
• Initial Report FDA Received Date: 01/20/2026
• Supplement Report FDA Received Date: 02/15/2026; 03/13/2026; 03/24/2026
• Was Device Evaluated by Manufacturer? (Y/N): Yes
• Is the Device Labeled for Single Use? (Y/N): No
• Is This a Single-Use Device that was Reprocessed and Reused on a Patient? (Y/N): No
• Usage of Device: Unknown
• If action reported to FDA under 21 USC 360i(g), list FDA-assigned Recall Number or include a statement: N/A
• Patient Sequence Number: 1
• Patient Sex: Unknown