MAUDE Adverse Event Report: SYNTHES GMBH INSERT-HANDLE; ROD, FIXATION, INTRAMEDULLARY AND ACCESSORIES

Catalog Number	03.037.012
Medical Device Problem Code	Break (1069)
Health Effect - Clinical Code	No Clinical Signs, Symptoms or Conditions (4582)
Date of Event	01/08/2026
Type of Reportable Event	Malfunction
Event or Problem Description
It was reported that during an orthopedic procedure, the insert-handle, depth gauge f/scr ø2+2.4 meas-range up-t, and collinear reduction clamp sliding mechan were involved in a reported event.The event involved a damaged handle that could not guarantee sterility, a broken depth gauge, and a broken handle of a clamp.There was no reported consequence or impact to the patient, and no signs, symptoms, or patient involvement were identified.
Additional Manufacturer Narrative
Product complaint # (b)(4).This report is being submitted pursuant to the provisions of 21 cfr, part 803 (and/or part 4, as applicable).This report may be based on information which has not been investigated or verified prior to the required reporting date.This report does not reflect a conclusion by depuy synthes, or its employees that the report constitutes an admission that the product, depuy synthes, or its employees caused or contributed to the potential event described in this report.If information is obtained that was not available for the initial report, a follow-up report will be filed as appropriate.
Additional Manufacturer Narrative
Depuy synthes is submitting this report pursuant to the provisions of 21 cfr, part 803.This report may be based on information which depuy synthes has not been able to investigate or verify prior to the required reporting date.This report does not reflect a conclusion by fda, depuy synthes or its employees that the report constitutes an admission that the device, depuy synthes, or its employees caused or contributed to the potential event described in this report.H11 additional narrative: added: d10 if information is obtained that was not available for the initial medwatch, a follow-up medwatch will be filed as appropriate.
Additional Manufacturer Narrative
Depuy synthes is submitting this report pursuant to the provisions of 21 cfr, part 803.This report may be based on information which depuy synthes has not been able to investigate or verify prior to the required reporting date.This report does not reflect a conclusion by fda, depuy synthes or its employees that the report constitutes an admission that the device, depuy synthes, or its employees caused or contributed to the potential event described in this report.If the information is unknown, not available or does not apply, the section/field of the form is left blank.H11 additional narrative: added: d9.Corrected: h8.The device was received, the investigation is in progress, no conclusion could be drawn at the time of filing this report.If information is obtained that was not available for the initial medwatch, a follow-up medwatch will be filed as appropriate.
Additional Manufacturer Narrative
Depuy synthes is submitting this report pursuant to the provisions of 21 cfr, part 803.This report may be based on information which depuy synthes has not been able to investigate or verify prior to the required reporting date.This report does not reflect a conclusion by fda, depuy synthes or its employees that the report constitutes an admission that the device, depuy synthes, or its employees caused or contributed to the potential event described in this report.If the information is unknown, not available or does not apply, the section/field of the form is left blank.H11 additional narrative: added: h4.Corrected: g1.H3, h6: the product was returned to depuy synthes for evaluation.Visual inspection of the returned device found that a portion of the body of the insert-handle shows signs of breakage additionally the device presents signs of heavy usage consistent with the time of service of the device, the reported condition was able to be confirmed.The broken fragments were not returned for inspection.The observed condition was identified as an end of life indicator; damage consistent with repeated use and servicing.The lifecycle requirements of the device are event related and depend on the use and inspection of the device in clinical practice.As the device can be damaged on the first or 100th use, the device must be properly inspected prior to each surgical use.Refer to the device/country specific ifu for information related to end of life, reprocessing instructions, and inspection procedures.A dimensional inspection was not performed since it was not applicable to the complaint condition.A functional test was not performed since it was not applicable to the complaint condition.The overall complaint was confirmed as the observed condition of the insert-handle would have contributed to the complained issue.Based on the investigation findings, the potential cause is traced to end of life, and it has been determined that no corrective and/or preventative action is required.There is no indication that a design or manufacturing issue has caused the reported complaint condition.As part of depuy synthes quality process, all devices are manufactured, inspected, and released to approved specifications.Additional monitoring for any potential safety signals will be conducted through complaint trending and other post-market safety surveillance activities.Device history lot: product code 03.037.012, lot number l507389, manufacturing site: haegendorf, release to warehouse date: 16.Oct.2017.A manufacturing record evaluation was performed for the finished device lot number, and no non-conformances were identified.If information is obtained that was not available for the initial medwatch, a follow-up medwatch will be filed as appropriate.

• Brand Name: INSERT-HANDLE
• Common Device Name: ROD, FIXATION, INTRAMEDULLARY AND ACCESSORIES
• Manufacturer (Section D): SYNTHES GMBH; luzernstrasse 19-21; zuchwil 4528 ; SZ 4528
• Manufacturer (Section G): WERK HÄGENDORF (CH); im bifang 6; haegendorf CO 4614 ; SZ 4614
• Manufacturer Contact: elba bello ; 1302 wright lane east; west chester, PA 19380 ; 9083863534
• MDR Report Key: 24148629
• Report Number: 8030965-2026-00745
• Device Sequence Number: 13015357
• Product Code: HSB
• UDI-Device Identifier: 07611819642386
• UDI-Public: (01)07611819642386(10)L507389
• Combination Product (Y/N): N
• Initial Reporter Country: CA
• PMA/510(K) Number: K131548
• Number of Events Summarized: 1
• Summary Report (Y/N): N
• Serviced by Third Party (Y/N): Unknown
• Reporter Type: Manufacturer
• Report Source: Foreign,Health Professional,Company Representative
• Initial Reporter Occupation: Other Health Care Professional
• Type of Report: Initial,Followup,Followup,Followup

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Is this an Adverse Event Report?: No
• Is this a Product Problem Report?: Yes
• Operator of Device: Health Professional
• Device Catalogue Number: 03.037.012
• Device Lot Number: L507389
• Was Device Available for Evaluation?: Device Returned to Manufacturer
• Is the Reporter a Health Professional?: Yes
• Type of Report(Section G): Follow-Up
• Initial Date Received by Manufacturer: 01/08/2026
• Supplement Date Received by Manufacturer: 01/22/2026; 02/16/2026; 02/16/2026
• Initial Report FDA Received Date: 01/22/2026
• Supplement Report FDA Received Date: 01/26/2026; 02/17/2026; 02/17/2026
• Was Device Evaluated by Manufacturer? (Y/N): Yes
• Date Device Manufactured: 10/16/2017
• Is the Device Labeled for Single Use? (Y/N): No
• Is This a Single-Use Device that was Reprocessed and Reused on a Patient? (Y/N): No
• Usage of Device: Unknown
• Patient Sequence Number: 1
• Concomitant Medical Products and Therapy/Usage Dates: COLLINEAR REDUCTION CLAMP SLIDING MECHAN.; DEPTH GAUGE F/SCR Ø2+2.4 MEAS-RANGE UP-T.
• Patient Sex: Unknown