MAUDE Adverse Event Report: ETHICON ENDO-SURGERY, LLC. LIGACLIP*MCA MED LONG APPLIER; CLIP, IMPLANTABLE

Catalog Number	MCM30
Medical Device Problem Codes	Failure to Form Staple (2579); Failure to Fire (2610)
Health Effect - Clinical Code	No Clinical Signs, Symptoms or Conditions (4582)
Date of Event	01/08/2026
Type of Reportable Event	Malfunction
Additional Manufacturer Narrative
(b)(4).Date sent: 1/22/2026.D4: batch # unk.D4: udi: as the lot number for the device involved in the event was not provided, the full udi is currently not available.D4: udi: the expiration date is currently not available.Therefore, the full udi is currently not available.Attempts have been made to retrieve the device.To date the device has not been returned.If the device or further details are received at a later date a supplemental medwatch will be sent.An evaluation of the manufacturing record could not be performed as the required product identification number was not provided to complete the evaluation.This report is being submitted pursuant to the provisions of 21 cfr, part 803.This report may be based on information which has not been investigated or verified prior to the required reporting date.This report does not reflect a conclusion by ethicon, or its employees that the report constitutes an admission that the product, ethicon, or its employees caused or contributed to the potential event described in this report.If information is obtained that was not available for the initial report, a follow-up report will be filed as appropriate.
Event or Problem Description
It was reported that during an unk procedure, the nail is stuck and the nail is crooked.No patient consequences were reported.
Additional Manufacturer Narrative
(b)(4).Date sent: 3/2/2026.D4: batch # a97h11.Investigation summary: the product was returned to ees for evaluation.Visual inspection and functional testing were conducted on the returned device.Visual analysis of the returned sample revealed that the mcm30 device was returned with no apparent damage.Two (2) unformed clips and one (1) conforming clip were returned inside a plastic bag.In addition, the tyvek was returned along with the instrument.In an attempt to replicate the reported incident, the device was tested for functionality.Upon testing, the device was cycled and it fed and formed the remaining ten (10) clips as intended.As part of ees quality process all devices are manufactured, inspected, and released to approved specifications.Although no conclusion could be reach on the cause of the reported event.Ensure that a clip is in the jaws.Position the jaws so that the clip completely surrounds the vessel to be ligated.Fully squeeze the handles together until they stop.As the handles are squeezed, the clip closes and occludes the vessel or tubular structure.Fully release the handles to return the instrument to its original open position.The next clip is automatically advanced.Inspect the jaws after each clip application to ensure the presence of a new clip before applying the next clip.Repeat steps as necessary to continue ligation of tissue.For optimal performance, periodically clean the instrument during the procedure by submerging the jaw and distal end of the applier shaft in saline.The event described could not be confirmed as the device performed without any difficulties noted.Device history review: a manufacturing record evaluation was performed for the finished device batch a97h11 number, and no non-conformances were identified.

• Common Device Name: CLIP, IMPLANTABLE
• Manufacturer (Section D): ETHICON ENDO-SURGERY, LLC.; 475 calle c; guaynabo 00969
• Manufacturer (Section G): ETHICON ENDO-SURGERY, LLC.; 475 calle c; guaynabo 00969 ; * 00969
• Manufacturer Contact: orla o'mahony ; 475 calle c; guaynabo ; 3035526892
• MDR Report Key: 24152583
• Report Number: 3005075853-2026-00683
• Device Sequence Number: 15957743
• Product Code: GDO
• UDI-Device Identifier: 10705036002482
• UDI-Public: (01)10705036002482(17)300131(10)336D19
• Combination Product (Y/N): N
• Initial Reporter Country: TW
• PMA/510(K) Number: K820837
• Number of Events Summarized: 1
• Summary Report (Y/N): N
• Serviced by Third Party (Y/N): Unknown
• Reporter Type: Manufacturer
• Report Source: Foreign,Company Representative
• Initial Reporter Occupation: Other
• Type of Report: Initial,Followup
• Report Date (Section B): 03/02/2026

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Is this an Adverse Event Report?: No
• Is this a Product Problem Report?: Yes
• Operator of Device: Health Professional
• Device Catalogue Number: MCM30
• Device Lot Number: 336D19
• Was Device Available for Evaluation?: Device Returned to Manufacturer
• Is the Reporter a Health Professional?: No
• Type of Report(Section G): Follow-Up
• Initial Date Received by Manufacturer: 01/06/2026
• Supplement Date Received by Manufacturer: 02/10/2026
• Initial Report FDA Received Date: 01/22/2026
• Supplement Report FDA Received Date: 03/02/2026
• Was Device Evaluated by Manufacturer? (Y/N): Yes
• Date Device Manufactured: 02/27/2025
• Is the Device Labeled for Single Use? (Y/N): Yes
• Is This a Single-Use Device that was Reprocessed and Reused on a Patient? (Y/N): No
• Usage of Device: Initial
• Patient Sequence Number: 1
• Patient Sex: Unknown