MAUDE Adverse Event Report: ETHICON INC. SFXSYM PDS+ UNI VIO 9IN 2-0 SA CT-1; SUTURE, SURGICAL, ABSORBABLE, POLYDIOXANONE

Catalog Number	SXPP1A423
Medical Device Problem Code	Material Separation (1562)
Health Effect - Clinical Code	No Clinical Signs, Symptoms or Conditions (4582)
Date of Event	01/01/2025
Type of Reportable Event	Malfunction
Additional Manufacturer Narrative
Product complaint # (b)(4) date sent to the fda: 1/23/2026.This report is being submitted pursuant to the provisions of 21 cfr, part 803, part 4 subpart b.This report may be based on information which has not been investigated or verified prior to the required reporting date.This report does not reflect a conclusion by ethicon, or its employees that the report constitutes an admission that the product, ethicon, or its employees caused or contributed to the potential event described in this report.If information is obtained that was not available for the initial report, a follow-up report will be filed as appropriate.A manufacturing record evaluation was performed for the finished device lot, and no non-conformances were identified.Attempts are being made to obtain the following information.To date no response has been provided.If further details are received at a later date a supplemental medwatch will be sent: when did the alleged deficiency occur (removal from package / during handling prior to use on patient/ during passage through tissue / during tying / post-op)? if different, please explain.Were there any patient consequences? please perform and document the follow up attempt for product return.Please document the shipment tracking number in notes or rmao sections.Please provide the title of external person providing answers to follow-up (e.G.Nurse, surgeon, risk manager).To date the device has not been returned.If the device or further details are received at a later date a supplemental medwatch will be sent.
Event or Problem Description
It was reported that a patient underwent an unknown procedure on an unknown date and barbed suture was used.It was reported that the needle and suture was divided when the surgeon was using it in the abdominal.Even he didn't do suturing done, opened new 3 pieces but all were divided.He was suffering during operation and complaining about it.There were no patient consequence reported.Additional information was requested.
Additional Manufacturer Narrative
Product complaint # (b)(4).Date sent to the fda: 3/23/2026.This report is being submitted pursuant to the provisions of 21 cfr, part 803, part 4 subpart b.This report may be based on information which has not been investigated or verified prior to the required reporting date.This report does not reflect a conclusion by ethicon, or its employees that the report constitutes an admission that the product, ethicon, or its employees caused or contributed to the potential event described in this report.If information is obtained that was not available for the initial report, a follow-up report will be filed as appropriate.H6 component code: g07002 no device problem found additional information: d9, h3, h6 h3.Investigational summary: the product was returned to eth for evaluation.Visual inspection revealed that nine (9) unopened samples were received for analysis.Product code sxpp1a423.In order to evaluate the condition of the returned samples, the packets were opened, and the swage and attachment area were noted as expected.The sutures were dispensed without problems and examined along the strand no anomalies were observed during evaluation.The functional test was performed using instron equipment and the pull force result was above the minimum requirements.As part of eth quality process, all devices are manufactured, inspected, and released to approved specifications.The event described could not be confirmed as the device performed without any difficulties noted.Although no product defect was identified, there may have been other circumstances or issues that occurred during the use of the device that could not be replicated during the laboratory analysis.Additional complaint information monitoring for potential safety signals is conducted through complaint trending as part of post-market surveillance.
Additional Manufacturer Narrative
Product complaint # (b)(4).Date sent to the fda: 2/27/2026.This report is being submitted pursuant to the provisions of 21 cfr, part 803, part 4 subpart b.This report may be based on information which has not been investigated or verified prior to the required reporting date.This report does not reflect a conclusion by ethicon, or its employees that the report constitutes an admission that the product, ethicon, or its employees caused or contributed to the potential event described in this report.If information is obtained that was not available for the initial report, a follow-up report will be filed as appropriate.H6 component code: g07002 pending evaluation of returned device.H6 component code: c22 - photo analysis.Additional information: d9, h3, h6.A manufacturing record evaluation was performed for the finished device lot, and no non-conformances were identified.Additional information was requested, the following was obtained: 1.This situation occurred during passage through tissues.2.The patient was fine because the surgeon changed the suture and sutured well after it occurred.H3 photo analysis: this is an analysis for a photo submitted to ethicon for evaluation.During the visual analysis, the following was observed: the photo shows an apparent needle detachment; the product code and lot number are not visible in the image.A clear analysis of the end point of failure or the needle hole could not be performed due to the position of the needle.Based on the photo review, the event reported is confirmed, however no conclusion or root cause could be determined.Hands on device analysis may provide the additional evidence necessary to confirm the root cause of the reported event.Because the device was not returned our evaluation is limited.We value the opportunity to fully analyze the device upon its return.As part of ethicon quality process all devices are manufactured, inspected, and released to approved specifications.Additional complaint information monitoring for potential safety signals will be conducted through complaint trending as part of post market surveillance.A device has been received, however it has not yet been evaluated.Any further information derived from the evaluation will be submitted in a supplemental 3500a form.

• Brand Name: SFXSYM PDS+ UNI VIO 9IN 2-0 SA CT-1
• Common Device Name: SUTURE, SURGICAL, ABSORBABLE, POLYDIOXANONE
• Manufacturer (Section D): ETHICON INC.; 1000 route 202; raritan NJ 08869
• Manufacturer (Section G): ETHICON INC.-JUAREZ; calle durango #2751; ciudad juarez 32575 ; MX 32575
• Manufacturer Contact: orla o'mahony ; 1000 route 202; raritan, NJ 08869 ; 3035526892
• MDR Report Key: 24160156
• Report Number: 2210968-2026-00863
• Device Sequence Number: 21087560
• Product Code: NEW
• UDI-Device Identifier: 10705031245365
• UDI-Public: (01)10705031245365(17)270131(10)1068LX
• Combination Product (Y/N): Y
• Initial Reporter Country: KS
• PMA/510(K) Number: K141776
• Number of Events Summarized: 1
• Summary Report (Y/N): N
• Serviced by Third Party (Y/N): Unknown
• Reporter Type: Manufacturer
• Report Source: Foreign,Health Professional
• Initial Reporter Occupation: Other
• Type of Report: Initial,Followup,Followup
• Report Date (Section B): 01/23/2026

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Is this an Adverse Event Report?: No
• Is this a Product Problem Report?: Yes
• Operator of Device: Health Professional
• Device Catalogue Number: SXPP1A423
• Device Lot Number: 1068LX
• Was Device Available for Evaluation?: Device Returned to Manufacturer
• Is the Reporter a Health Professional?: No
• Type of Report(Section G): Thirty-Day
• Initial Date Received by Manufacturer: 12/30/2025
• Supplement Date Received by Manufacturer: 02/20/2026; 02/27/2026
• Initial Report FDA Received Date: 01/23/2026
• Supplement Report FDA Received Date: 02/27/2026; 03/23/2026
• Was Device Evaluated by Manufacturer? (Y/N): Yes
• Date Device Manufactured: 02/05/2025
• Is the Device Labeled for Single Use? (Y/N): Yes
• Is This a Single-Use Device that was Reprocessed and Reused on a Patient? (Y/N): No
• Usage of Device: Initial
• Patient Sequence Number: 1
• Patient Sex: Unknown