MAUDE Adverse Event Report: ALCON RESEARCH, LLC - HUNTINGTON ACRYSOF MULTIPIECE IOL; INTRAOCULAR LENS

Model Number	MA60AC
Medical Device Problem Code	Break (1069)
Health Effect - Clinical Code	No Clinical Signs, Symptoms or Conditions (4582)
Type of Reportable Event	Malfunction
Additional Manufacturer Narrative
The product was not returned.A device history record review and a non-conformance review of the reported lot number was conducted.The deviation review did not reveal any potential contributing factors to the reported complaint and all corresponding production release specifications defined in the device master record were met.Associated products were provided.However, it is unknown if the products provided were used with the company lens model.The company model is only qualified for use in the company cartridges.The product investigation could not identify a root cause for the reported complaint.The product has not been received to evaluate.Not enough information was provided to determine if qualified products were used.The company model is only qualified for use in the company cartridges.The instructions for use (ifu) instructs that an company qualified delivery system and viscoelastic combination should be used.Company foldable iol (intraocular lens) are qualified for use with an company qualified delivery system (handpiece and cartridge) and ophthalmic viscosurgical device (ovd) combination.The use of an unqualified combination may cause damage to the lens and potential complications during the implantation process.The ifu instructs to completely fill the cartridge with ovd immediately prior to loading and delivery of the lens.Do not attempt to load the lens without adequate ovd in the device.Not adequately filling the device with viscoelastic will result in inadequate coverage of lens and the lens fold path with ovd, which may result in damage.In addition, the company ifu has specific lens loading instructions for multipiece lenses.The ifu instructs: use holding forceps to grasp the lens by the optic edge and gently place the lens anterior side up into the back of the ovd-filled cartridge (diagram provided).The lens should be inserted until it is centered with or slightly past the outline etched into the top of the cartridge.Lenses with a 6.5 mm optic diameter may need to be pre-folded for easy entry into the back of the cartridge.Lens may be pre-folded by gently applying pressure to the edge of the lens while holding the central optic with forceps as shown.The trailing haptic will extend from the proximal end of the cartridge.Position the trailing haptic to the left of the haptic post as shown in the detailed view.This will allow the plunger to go past the haptic during the initial advancement of the plunger into the cartridge.Verify the lens is positioned on the bottom surface of the cartridge.The haptic should be maintained to the left of the post when the lens is loaded correctly.Accurate positioning of the lens will decrease the potential for optic and haptic damage.Use the company cartridge at operating room temperatures between 18° c (64° f) and 23° c (73° f).Temperature greater than 23° c (73° f).If the operating room temperature is too high (> 23°c / 73° f) lens folding consistency is negatively affected, the lens is more adherent and this may inhibit lens advancement and cause damage.Due diligence has been performed in an attempt to obtain further information on this event.The manufacturer internal reference number is (b)(4).H.10 reflects all related report numbers associated with this product event that have been submitted at this time.
Event or Problem Description
A non-healthcare professional reported that during an intraocular lens (iol) implant procedure, the doctor reported that the lens was not sitting right.In the surgeon¿s opinion, the haptics was crooked that contribute to or cause the event and there was no impact to the patient.

• Brand Name: ACRYSOF MULTIPIECE IOL
• Common Device Name: INTRAOCULAR LENS
• Manufacturer (Section D): ALCON RESEARCH, LLC - HUNTINGTON; 246 kyle lane; huntington WV 25702
• Manufacturer (Section G): ALCON RESEARCH, LLC - HUNTINGTON; 246 kyle lane; huntington WV 25702
• Manufacturer Contact: jonathan schlech ; 6201 south freeway; mail stop ab2-6; fort worth, TX 76134 ; 8007579780
• MDR Report Key: 24207426
• Report Number: 1119421-2026-00186
• Device Sequence Number: 9810002
• Product Code: HQL
• UDI-Device Identifier: 00380652552523
• UDI-Public: (01)00380652552523(17)270110(11)220112(10)15332117
• Combination Product (Y/N): N
• Initial Reporter State: FL
• Initial Reporter Country: US
• PMA/510(K) Number: P930014
• Number of Events Summarized: 1
• Summary Report (Y/N): N
• Reporter Type: Manufacturer
• Initial Reporter Occupation: Non-Healthcare Professional
• Type of Report: Initial
• Report Date (Section B): 01/29/2026

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Is this an Adverse Event Report?: No
• Is this a Product Problem Report?: Yes
• Operator of Device: Health Professional
• Device Model Number: MA60AC
• Device Catalogue Number: MA60AC.200
• Device Lot Number: 15332117
• Was Device Available for Evaluation?: No
• Type of Report(Section G): Initial
• Initial Date Received by Manufacturer: 01/05/2026
• Initial Report FDA Received Date: 01/29/2026
• Date Device Manufactured: 01/12/2022
• Is This a Single-Use Device that was Reprocessed and Reused on a Patient? (Y/N): No
• Usage of Device: Initial
• Patient Sequence Number: 1
• Concomitant Medical Products and Therapy/Usage Dates: ACRYSOF MULTIPIECE IOL; CLAREON HYDROPHOBIC IOL; CLAREON MONARCH IV IOL, INJECTOR; DUOVISC; MONARCH II LOADING FORCEPS
• Patient Sex: Unknown