MAUDE Adverse Event Report: ETHICON INC. ETHLN BLK 18IN 7-0 S/A P-1 PRM; SUTURE, NONABSORBABLE, SYNTHETIC

Catalog Number	1696G
Medical Device Problem Code	Material Separation (1562)
Health Effect - Clinical Code	No Clinical Signs, Symptoms or Conditions (4582)
Date of Event	01/01/2026
Type of Reportable Event	Malfunction
Event or Problem Description
It was reported that a patient underwent an unknown procedure on an unknown date and suture was used.The problem of the suture pulling off the needle happened in surgery.Total 3 products occurred needle pull off issue.Changed to another one to complete the surgery.No adverse patient consequences were reported.
Additional Manufacturer Narrative
Product complaint # (b)(4).Attempts have been made to retrieve the device.To date the device has not been returned.If the device or further details are received at a later date a supplemental medwatch will be sent.Additional information was requested, and the following was obtained: - when did the alleged deficiency occur (removal from package / during handling prior to use on patient/ during passage through tissue / during tying / post-op)? if different, please explain.--during passage through tissue this report is being submitted pursuant to the provisions of 21 cfr, part 803.This report may be based on information which has not been investigated or verified prior to the required reporting date.This report does not reflect a conclusion by ethicon, or its employees that the report constitutes an admission that the product, ethicon, or its employees caused or contributed to the potential event described in this report.If information is obtained that was not available for the initial report, a follow-up report will be filed as appropriate.
Additional Manufacturer Narrative
Product complaint # (b)(4).This report is being submitted pursuant to the provisions of 21 cfr, part 803.This report may be based on information which has not been investigated or verified prior to the required reporting date.This report does not reflect a conclusion by ethicon, or its employees that the report constitutes an admission that the product, ethicon, or its employees caused or contributed to the potential event described in this report.If information is obtained that was not available for the initial report, a follow-up report will be filed as appropriate.Additional information: d9, h3, h6.A manufacturing record evaluation was performed for the finished device lot, and no non-conformances were identified.Additional h6 component code: g07002 unable to investigate further.Additional h3 investigation summary: the product was returned to ethicon for evaluation.One empty open overwrap, one paper lid and one empty winding former were received for analysis.Product code 1696g.The visual assessment of the returned winding former.No suture and needle were returned for analysis.As per this condition, the event described could not be confirmed.If additional information is made available, the investigation will be updated as applicable.As part of our quality process, the manufacturing records of this lot-serial number were reviewed, and the manufacturing standards were met prior to the release of this batch.As part of the ethicon quality process, all devices are manufactured, inspected, and released to approved specifications.Additional complaint information monitoring for potential safety signals is conducted through complaint trending as part of post-market surveillance.

• Brand Name: ETHLN BLK 18IN 7-0 S/A P-1 PRM
• Common Device Name: SUTURE, NONABSORBABLE, SYNTHETIC
• Manufacturer (Section D): ETHICON INC.; 1000 route 202; raritan NJ 08869
• Manufacturer (Section G): ETHICON INC.-JUAREZ; calle durango #2751; ciudad juarez 32575 ; MX 32575
• Manufacturer Contact: orla o'mahony ; 1000 route 202; raritan, NJ 08869 ; 3035526892
• MDR Report Key: 24228506
• Report Number: 2210968-2026-01166
• Device Sequence Number: 10230073
• Product Code: GAR
• UDI-Device Identifier: 10705031002159
• UDI-Public: (01)10705031002159(17)290731(10)102JEA
• Combination Product (Y/N): N
• Initial Reporter Country: CH
• PMA/510(K) Number: K946173
• Number of Events Summarized: 1
• Summary Report (Y/N): N
• Serviced by Third Party (Y/N): Unknown
• Reporter Type: Manufacturer
• Report Source: Foreign,Health Professional
• Initial Reporter Occupation: Other
• Type of Report: Initial,Followup
• Report Date (Section B): 03/03/2026

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Is this an Adverse Event Report?: No
• Is this a Product Problem Report?: Yes
• Operator of Device: Health Professional
• Device Catalogue Number: 1696G
• Device Lot Number: 102JEA
• Was Device Available for Evaluation?: Device Returned to Manufacturer
• Is the Reporter a Health Professional?: No
• Type of Report(Section G): Thirty-Day
• Initial Date Received by Manufacturer: 01/13/2026
• Supplement Date Received by Manufacturer: 02/06/2026
• Initial Report FDA Received Date: 01/30/2026
• Supplement Report FDA Received Date: 03/03/2026
• Was Device Evaluated by Manufacturer? (Y/N): Yes
• Date Device Manufactured: 08/02/2024
• Is the Device Labeled for Single Use? (Y/N): Yes
• Is This a Single-Use Device that was Reprocessed and Reused on a Patient? (Y/N): No
• Usage of Device: Initial
• Patient Sequence Number: 1
• Patient Sex: Unknown