MAUDE Adverse Event Report: ARTHROCARE CORPORATION EVAC 70 XTRA COBLATOR II; ELECTROSURGICAL, CUTTING & COAGULATION & ACCESSORIES

Catalog Number	EIC5872-01
Medical Device Problem Code	Break (1069)
Health Effect - Clinical Code	No Clinical Signs, Symptoms or Conditions (4582)
Date of Event	01/12/2026
Type of Reportable Event	Malfunction
Additional Manufacturer Narrative
Internal complaint reference (b)(4).H11 h3, h6: this complaint was opened by smith+nephew to document a product problem associated with a smith+nephew device.The reported problem relates to known risks with the device itself or with its use that are appropriately documented in our risk files.Smith+nephew will continue to monitor trends in accordance with our post-market surveillance process and take necessary action as required if anticipated severity and/or occurrence rates are exceeded.Smith+nephew has no reason to suspect that the product failed to meet any specifications at the time of manufacture.Based on our review of all currently available information, we are unable to identify a definitive root cause.However, as the use of our product cannot be excluded as a potential cause or contributory factor to the reported issue, we are submitting this report in accordance with applicable regulations.If additional investigative findings or information becomes available that alters the conclusions of this report, a follow-up report will be submitted as required.
Event or Problem Description
It was reported that, during a surgery, it was noticed that the electrode of the evac 70 xtra was broken.The procedure was resumed using an equivalent sn back up device.It is unknown if there was a delay.No further complications were reported.
Additional Manufacturer Narrative
H11: internal complaint reference: (b)(4).H3, h6: the reported device was received for evaluation.A visual inspection observed the returned instrument shows no manufacturing abnormalities.Product was out of the original packaging.No packaging returned.The tip is worn from use.The electrodes are thin from use.The center and top electrodes are missing most of their body from use.A functional evaluation of the device found that the opened device was tested and plugged into the controller and registered settings (7,3).The wand can produce plasma with its remaining electrode and had no issues activating coag.A review of device records showed there were no indications to suggest that the product did not meet manufacturing specifications upon release for distribution.A complaint history review found similar reported events.A risk management review found that the reported failure and/or harm was documented appropriately, and there were no indications to suggest the anticipated risk is not adequate.A definitive root cause for the reported issue could not be determined.Factors that could have contributed to the failure include procedural variance, or deviations from established protocols, increasing risks and leading to unintended consequences ((1) hitting the device tip against a hard surface.2) using the device as a lever to enlarge surgical site.3) mechanical displacement of tissue through applied force.4) activating the device above recommended settings for prolonged periods of time).Based on this investigation, the need for corrective action is not indicated.

• Brand Name: EVAC 70 XTRA COBLATOR II
• Common Device Name: ELECTROSURGICAL, CUTTING & COAGULATION & ACCESSORIES
• Manufacturer (Section D): ARTHROCARE CORPORATION; 7000 west william cannon drive; austin TX 78735
• Manufacturer (Section G): ARTHROCARE CORPORATION; 7000 west william cannon drive; austin TX 78735
• Manufacturer Contact: holly topping ; 1450 brooks rd.; memphis, TN 38116 ; 5123913905
• MDR Report Key: 24235734
• Report Number: 3006524618-2026-00038
• Device Sequence Number: 10188104
• Product Code: GEI
• UDI-Device Identifier: 00817470003185
• UDI-Public: 817470003185
• Combination Product (Y/N): N
• Initial Reporter Country: CH
• PMA/510(K) Number: K202006
• Number of Events Summarized: 1
• Summary Report (Y/N): N
• Serviced by Third Party (Y/N): N
• Reporter Type: Manufacturer
• Report Source: Other,Foreign,Company Representative
• Initial Reporter Occupation: Other
• Type of Report: Initial,Followup
• Report Date (Section B): 03/09/2026

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Is this an Adverse Event Report?: No
• Is this a Product Problem Report?: Yes
• Operator of Device: Health Professional
• Device Catalogue Number: EIC5872-01
• Device Lot Number: 2153558
• Was Device Available for Evaluation?: Device Returned to Manufacturer
• Is the Reporter a Health Professional?: No
• Type of Report(Section G): Thirty-Day
• Initial Date Received by Manufacturer: 01/12/2026
• Supplement Date Received by Manufacturer: 03/06/2026
• Initial Report FDA Received Date: 02/02/2026
• Supplement Report FDA Received Date: 03/09/2026
• Was Device Evaluated by Manufacturer? (Y/N): Device Not Returned to Manufacturer
• Date Device Manufactured: 05/08/2024
• Is the Device Labeled for Single Use? (Y/N): Yes
• Is This a Single-Use Device that was Reprocessed and Reused on a Patient? (Y/N): No
• Usage of Device: Initial
• Patient Sequence Number: 1
• Patient Sex: Unknown