|
Product complaint #(b)(4).Date sent to the fda: 2/2/2026 h6 component code: g07002 - no device problem found this report is being submitted pursuant to the provisions of 21 cfr, part 803, part 4 subpart b.This report may be based on information which has not been investigated or verified prior to the required reporting date.This report does not reflect a conclusion by ethicon, or its employees that the report constitutes an admission that the product, ethicon, or its employees caused or contributed to the potential event described in this report.If information is obtained that was not available for the initial report, a follow-up report will be filed as appropriate.A manufacturing record evaluation was performed for the finished device lot, and no non-conformances were identified.H3 investigational summary: the product was returned to eth for evaluation.Visual inspection revealed that one detached needle and one used suture piece outside the packaging were received for analysis.Product code vcp359h.During the inspection of the returned sample, the swage and attachment area were noted to be as expected.The barrel hole of the needle was examined under magnification, and no suture remnant was noted.The suture was examined, and the insertion mark could not be observed during the evaluation.Given the current condition of the returned sample, it is not possible to determine the potential cause of the reported event.As part of eth quality process, all devices are manufactured, inspected, and released to approved specifications.A manufacturing record evaluation was performed for the finished device batch number, and no non-conformances were identified.Additional complaint information monitoring for potential safety signals will be conducted through complaint trending as part of post-market surveillance.
|