MAUDE Adverse Event Report: MENTOR TEXAS MENTOR MEMORYGEL BREAST IMPLANT; PROSTHESIS, BREAST, NONINFLATABLE, INTERNAL, SILICONE GEL-FILLED

Catalog Number	3505251BC
Medical Device Problem Code	Material Rupture (1546)
Health Effect - Clinical Code	Deformity/ Disfigurement (2360)
Date of Event	01/07/2026
Type of Reportable Event	Serious Injury
Additional Manufacturer Narrative
Since the device has not been returned for analysis, no product failure analysis can be conducted, and no determination of possible contributing factors can be made.As such, the investigation will be closed.If the complaint device is received in the future, the investigation will be reopened and conducted as appropriate.A manufacturing record evaluation (mre) was performed, and no anomalies were found related to this complaint.In addition, the mre verifies that the device was manufactured in accordance with documented specification and procedures.Reason for device explant and/or reoperation: rupture.Mentor is submitting this report pursuant to the provisions of 21 cfr, part 803.This report may be based on information which mentor has not been able to investigate or verify prior to the required reporting date.This report does not reflect a conclusion by fda, mentor, or its employees that the report constitutes an admission that the device, mentor, or its employees caused or contributed to the potential event described in this report.If certain information is unknown, not available or does not apply, the section/field of the form is left blank.Manufacturer¿s reference number: (b)(4).
Event or Problem Description
It was reported that a patient implanted with a 525cc mentor memorygel breast implant experienced a rupture on the left side post-operatively.As a result, the patient underwent explantation on (b)(6) 2026.
Additional Manufacturer Narrative
Photo evaluation summary: upon visual evaluation of the images provided in the complaint, the implant was observed ruptured.As the product involved in this complaint was discarded, the device could not be analyzed according to our procedures.Mentor also performed a manufacturing record evaluation related to the reported complaint for the finished device lot number.No manufacturing non-conformances were identified as part of this evaluation.Some breast ptosis is a normal component of the mature breast.Ptosis becomes undesirable when the breast parenchyma predominates below the areola, droops considerably below the inframammary fold and the nipple points downward.Augmentation alone, without consideration of the ptosis can produce a less than desirable cosmetic result known as a ""rock in sock"" deformity or an increased ptotic appearance.Ptosis is a known complication associated with these devices and is referenced in our current product insert data sheet.As part of mentor¿s quality process, all devices are manufactured, inspected, and released according to approved specifications.Based on the results of this investigation, it was determined that the product met the manufacturing release criteria: no corrective and preventive action (capa) is required now.Additional complaint information monitoring for potential safety signals will be conducted through complaint trending as part of post market surveillance.Manufacturer¿s reference number: (b)(4).

• Brand Name: MENTOR MEMORYGEL BREAST IMPLANT
• Common Device Name: PROSTHESIS, BREAST, NONINFLATABLE, INTERNAL, SILICONE GEL-FILLED
• Manufacturer (Section D): MENTOR TEXAS; 3041 skyway circle north; irving TX 75038
• Manufacturer (Section G): MENTOR TEXAS; 3041 skyway circle north; irving TX 75038
• Manufacturer Contact: henry boden ; 3041 skyway circle north; irving, TX 75038 ; 9497882078
• MDR Report Key: 24260638
• Report Number: 1645337-2026-01097
• Device Sequence Number: 20827059
• Product Code: FTR
• UDI-Device Identifier: 00081317003823
• UDI-Public: (01)00081317003823(17)210220(10)7297065
• Combination Product (Y/N): N
• Initial Reporter Country: US
• PMA/510(K) Number: P030053
• Number of Events Summarized: 1
• Summary Report (Y/N): N
• Device Implanted Year: 2016
• Device Explanted Year: 2026
• Serviced by Third Party (Y/N): Unknown
• Reporter Type: Manufacturer
• Report Source: Health Professional
• Initial Reporter Occupation: Other
• Type of Report: Initial,Followup

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Is this an Adverse Event Report?: Yes
• Is this a Product Problem Report?: Yes
• Operator of Device: Health Professional
• Device Expiration Date: 02/20/2021
• Device Catalogue Number: 3505251BC
• Device Lot Number: 7297065
• Was Device Available for Evaluation?: No
• Is the Reporter a Health Professional?: No
• Type of Report(Section G): Follow-Up
• Initial Date Received by Manufacturer: 01/13/2026
• Supplement Date Received by Manufacturer: 01/21/2026
• Initial Report FDA Received Date: 02/04/2026
• Supplement Report FDA Received Date: 02/18/2026
• Was Device Evaluated by Manufacturer? (Y/N): No
• Date Device Manufactured: 02/23/2016
• Is the Device Labeled for Single Use? (Y/N): Yes
• Is This a Single-Use Device that was Reprocessed and Reused on a Patient? (Y/N): No
• Usage of Device: Initial
• Patient Sequence Number: 1
• Outcome Attributed to Adverse Event: Required Intervention
• Patient Age: 34 YR
• Patient Sex: Female
• Patient Ethnicity: Non Hispanic
• Patient Race: White