MAUDE Adverse Event Report: DENTSPLY LLC SCHICK33 S2 SENSOR/3.0 CABLE RMA KIT 6'; UNIT, X-RAY, INTRAORAL

Catalog Number	100008651
Medical Device Problem Code	Poor Quality Image (1408)
Health Effect - Clinical Code	No Clinical Signs, Symptoms or Conditions (4582)
Type of Reportable Event	Malfunction
Additional Manufacturer Narrative
While no serious injury resulted in this event, if this malfunction recurred, it could cause or contribute to a serious injury or require medical or surgical intervention to preclude such.This event, therefore, is reportable per 21cfr part 803.Usb 3 firmware v1.4 contains an issue in the portion of code used to optimize sensor performance.If the optimization occurs during an exposure or sensor readout, there is a chance that the resulting image will be corrupted.Image data following the point of corruption will consist of data that was previously held in the memory of the usb device.As a result, the presented image may contain a portion of data from a previous exposure.In general, this would be obvious to the user since the presented image would either contain obvious artifacts or different anatomy than expected.Field service evaluation- solution description (b)(6) 2026 , 10:35:54 , (b)(6).Solution description: ptc troubleshot the issue and determined the sensor needs to be replaced.Added part number 100008651 no warranty.Ptc reported retakes, but no injury.Functional (yes/no): no.Problem description (b)(6) 2026, 12:40:48 (b)(6).Troubleshooting: issue reported: schick 33 sensor did the reported issue require multiple images / multiple exposures to be taken on a patient (yes/no - do not put na): y equipment type and model: schick 33 serial number: (b)(6)/xs55221 confirm sensor cable co lor: grey acquisition software & version: 22 issues in one or all rooms: all rooms other sensors work with working remotes in room(s) with issue: yes pc name: x-ray 3 schick driver version (programs and features): 5.16 remote fw/fpga version: na sensor fw version: na if remote issue: 2.0 or 3.0: tried different usb cable/usb port/bypassed usb hubs/extenders: 3.0 remote: tried on a 3.0 and 2.0 u sb port/cable clip connected: if sensor issue, replaced elastomer: yes if sensor issue, tried different sensor cable: yes if no response to radiation, confirmed xray head functional: additional troubleshooting steps/notes: all troubleshooting done with previous support rep were there any injuries or misdiagnosis if retakes were done (if above is no, answer na): na.
Event or Problem Description
While the customer was using a part of an intraoral sensor system, schick33 s2 sensor/3.0 cable rma kit 6', they allege experiencing image quality issues when an x-ray image was taken and an additional image was required.No injury was reported from the alleged event.

• Brand Name: SCHICK33 S2 SENSOR/3.0 CABLE RMA KIT 6'
• Common Device Name: UNIT, X-RAY, INTRAORAL
• Manufacturer (Section D): DENTSPLY LLC; 1301 smile way; york PA 17404
• Manufacturer (Section G): DENTSPLY LLC; 1301 smile way; york PA 17404
• Manufacturer Contact: dan eagar ; 221 west philadelphia st.; york, PA 17401 ; 7178457511
• MDR Report Key: 24366968
• Report Number: 2424472-2026-00539
• Device Sequence Number: 5228090
• Product Code: EAP
• UDI-Device Identifier: D0031000086510
• UDI-Public: D0031000086510
• Combination Product (Y/N): N
• Initial Reporter State: CO
• Initial Reporter Country: US
• PMA/510(K) Number: K093453
• Number of Events Summarized: 1
• Summary Report (Y/N): N
• Reporter Type: Manufacturer
• Report Source: Company Representative
• Initial Reporter Occupation: Non-Healthcare Professional
• Type of Report: Initial
• Report Date (Section B): 02/17/2026

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Is this an Adverse Event Report?: No
• Is this a Product Problem Report?: Yes
• Device Catalogue Number: 100008651
• Was Device Available for Evaluation?: No
• Distributor Facility Aware Date: 01/28/2026
• Type of Report(Section G): Initial
• Initial Date Received by Manufacturer: 01/28/2026
• Initial Report FDA Received Date: 02/17/2026
• Was Device Evaluated by Manufacturer? (Y/N): Yes
• Usage of Device: A
• Patient Sequence Number: 1
• Patient Sex: Unknown