MAUDE Adverse Event Report: MEDOS INTERNATIONAL SÃ RL CH EXPEDIUM; FIXATION, SPINAL INTERVERTEBRAL BODY

Catalog Number	179702000S
Medical Device Problem Code	Device-Device Incompatibility (2919)
Health Effect - Clinical Code	No Clinical Signs, Symptoms or Conditions (4582)
Date of Event	02/04/2026
Type of Reportable Event	Malfunction
Additional Manufacturer Narrative
Product complaint#: (b)(4).This report is being submitted pursuant to the provisions of 21 cfr, part 803 (and/or part 4, as applicable).This report may be based on information which has not been investigated or verified prior to the required reporting date.This report does not reflect a conclusion by depuy synthes, or its employees that the report constitutes an admission that the product, depuy synthes, or its employees caused or contributed to the potential event described in this report.If information is obtained that was not available for the initial report, a follow-up report will be filed as appropriate.
Event or Problem Description
It was reported that the vcffx screw could not be locked with set screw.There was a thirty (30) minute delay.The procedure was completed successfully.
Additional Manufacturer Narrative
Depuy synthes is submitting this report pursuant to the provisions of 21 cfr, part 803.This report may be based on information which depuy synthes has not been able to investigate or verify prior to the required reporting date.This report does not reflect a conclusion by fda, depuy synthes or its employees that the report constitutes an admission that the device, depuy synthes, or its employees caused or contributed to the potential event described in this report.If the information is unknown, not available or does not apply, the section/field of the form is left blank.H11 additional narrative: added: d9.The device was received, the investigation is in progress, no conclusion could be drawn at the time of filing this report.If information is obtained that was not available for the initial medwatch, a follow-up medwatch will be filed as appropriate.
Additional Manufacturer Narrative
Depuy synthes is submitting this report pursuant to the provisions of 21 cfr, part 803.This report may be based on information which depuy synthes has not been able to investigate or verify prior to the required reporting date.This report does not reflect a conclusion by fda, depuy synthes or its employees that the report constitutes an admission that the device, depuy synthes, or its employees caused or contributed to the potential event described in this report.If the information is unknown, not available or does not apply, the section/field of the form is left blank.H11 additional narrative: added: d10.H3, h6: the product was returned to depuy synthes for evaluation.Visual inspection of the returned device found distal end threads were found broken, remnants were not returned for revision.This condition may affect the interaction with mating devices.The observed condition of the device is consistent with a component failure that was caused by exposure to unintended forces like overtightening the device while assemblance; or by assembling the device in a misaligned position.A dimensional inspection was unable to be performed due to the post-manufacturing damage.A functional test was not performed since it was not applicable to the complaint condition.The overall complaint was confirmed as the observed condition of the single-inner setscrew would have contributed to the complained device issue.Based on the investigation findings, it has been determined that no corrective and/or preventative action is proposed.There is no indication that a design or manufacturing issue has caused the reported complaint condition.As part of depuy synthes quality process, all devices are manufactured, inspected, and released to approved specifications.Additional monitoring for any potential safety signals will be conducted through complaint trending and other post-market safety surveillance activities.Device history lot: a dhr evaluation was performed for the finished device.Product code: 179702000s.Lot number: 435144.It was electronically reviewed and no nonconformances / manufacturing irregularities were identified during the manufacturing process.The product was released on: 21.08.2025.Manufacturing site: jabil le locle.If information is obtained that was not available for the initial medwatch, a follow-up medwatch will be filed as appropriate.

• Brand Name: EXPEDIUM
• Common Device Name: FIXATION, SPINAL INTERVERTEBRAL BODY
• Manufacturer (Section D): MEDOS INTERNATIONAL SÃ RL CH; chemin-blanc 38; le locle 02400 ; SZ 02400
• Manufacturer (Section G): MEDOS INT SPINE; chemin blanc 38; le locle ; SZ
• Manufacturer Contact: elba bello ; 325 paramount drive; raynham, MA 02767 ; 9083863534
• MDR Report Key: 24377898
• Report Number: 1526439-2026-00180
• Device Sequence Number: 4941620
• Product Code: NKB
• UDI-Device Identifier: 10705034265063
• UDI-Public: (01)10705034265063(17)300531(10)435144
• Combination Product (Y/N): N
• Initial Reporter Country: AU
• PMA/510(K) Number: K200245
• Number of Events Summarized: 1
• Summary Report (Y/N): N
• Serviced by Third Party (Y/N): Unknown
• Reporter Type: Manufacturer
• Report Source: Foreign,Health Professional,Company Representative
• Initial Reporter Occupation: Other Health Care Professional
• Type of Report: Initial,Followup,Followup

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Is this an Adverse Event Report?: No
• Is this a Product Problem Report?: Yes
• Operator of Device: Health Professional
• Device Catalogue Number: 179702000S
• Device Lot Number: 435144
• Was Device Available for Evaluation?: Device Returned to Manufacturer
• Is the Reporter a Health Professional?: Yes
• Type of Report(Section G): Follow-Up
• Initial Date Received by Manufacturer: 02/04/2026
• Supplement Date Received by Manufacturer: 03/02/2026; 03/19/2026
• Initial Report FDA Received Date: 02/18/2026
• Supplement Report FDA Received Date: 03/03/2026; 03/23/2026
• Was Device Evaluated by Manufacturer? (Y/N): Yes
• Date Device Manufactured: 06/04/2025
• Is the Device Labeled for Single Use? (Y/N): Yes
• Is This a Single-Use Device that was Reprocessed and Reused on a Patient? (Y/N): No
• Usage of Device: Initial
• Patient Sequence Number: 1
• Concomitant Medical Products and Therapy/Usage Dates: MIS TI CFX FEN POLY 5X45.
• Patient Age: 68 YR
• Patient Sex: Male