MAUDE Adverse Event Report: ETHICON INC. VCL+ UD 27IN 5-0 S/A RB-1; SUTURE, ABSORBABLE, SYNTHETIC

Catalog Number	VCP213H
Medical Device Problem Code	Material Separation (1562)
Health Effect - Clinical Code	No Clinical Signs, Symptoms or Conditions (4582)
Date of Event	01/01/2026
Type of Reportable Event	Malfunction
Additional Manufacturer Narrative
Product complaint # (b)(4).Date sent to the fda: 2/24/2026.This report is being submitted pursuant to the provisions of 21 cfr, part 803, part 4 subpart b.This report may be based on information which has not been investigated or verified prior to the required reporting date.This report does not reflect a conclusion by ethicon, or its employees that the report constitutes an admission that the product, ethicon, or its employees caused or contributed to the potential event described in this report.If information is obtained that was not available for the initial report, a follow-up report will be filed as appropriate.A manufacturing record evaluation was performed for the finished device lot, and no non-conformances were identified.Additional information was requested, the following was obtained: what was the name of the procedure? what was the procedure date? when was the needle detached/pulled off from the suture (in the package, during removal from package, during handling prior to use on patient or during use on the patient)? please specify.Did the needle fall into the patient? if yes, was the needle piece removed from the patient during the same procedure? received information as following from sales rep via phone today.Please refer to the event description, other information requested is unknown.H3 investigational summary: the product was returned to eth for evaluation.Visual inspection revealed that one labeled winding former with a needle and one suture was received for analysis.Product code vcp213.During visual inspection of the needle.Marks were noted at the edge of the swage area.The barrel hole was examined, and a suture remnant was observed.Besides that, the suture was noted to be cut probably caused by a surgical instrument.As part of ethicon quality process, all devices are manufactured, inspected, and released to approved specifications.Additional complaint information monitoring for potential safety signals is conducted through complaint trending as part of post-market surveillance.
Event or Problem Description
It was reported that a patient underwent an unknown procedure on an unknown date and suture was used.It was reported that the problem of pulling off suture needle happened in surgery.Total 7 products occurred needle pull off issue.Changed another one to complete the surgery.There were no patient consequences reported.Additional information was requested.

• Brand Name: VCL+ UD 27IN 5-0 S/A RB-1
• Common Device Name: SUTURE, ABSORBABLE, SYNTHETIC
• Manufacturer (Section D): ETHICON INC.; 1000 route 202; raritan NJ 08869
• Manufacturer (Section G): ETHICON INC.-JUAREZ; calle durango #2751; ciudad juarez 32575 ; MX 32575
• Manufacturer Contact: orla o'mahony ; 1000 route 202; raritan, NJ 08869 ; 3035526892
• MDR Report Key: 24428938
• Report Number: 2210968-2026-01912
• Device Sequence Number: 18740022
• Product Code: GAM
• UDI-Device Identifier: 10705031051645
• UDI-Public: (01)10705031051645(17)281231(10)UAMHLB
• Combination Product (Y/N): Y
• Initial Reporter Country: CH
• PMA/510(K) Number: K132580
• Number of Events Summarized: 1
• Summary Report (Y/N): N
• Serviced by Third Party (Y/N): Unknown
• Reporter Type: Manufacturer
• Report Source: Foreign,Health Professional
• Initial Reporter Occupation: Other
• Type of Report: Initial
• Report Date (Section B): 02/24/2026

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Is this an Adverse Event Report?: No
• Is this a Product Problem Report?: Yes
• Operator of Device: Health Professional
• Device Catalogue Number: VCP213H
• Device Lot Number: UAMHLB
• Was Device Available for Evaluation?: Device Returned to Manufacturer
• Date Returned to Manufacturer: 02/13/2026
• Type of Report(Section G): Thirty-Day
• Initial Date Received by Manufacturer: 01/28/2026
• Initial Report FDA Received Date: 02/24/2026
• Was Device Evaluated by Manufacturer? (Y/N): Yes
• Date Device Manufactured: 01/15/2024
• Is the Device Labeled for Single Use? (Y/N): Yes
• Is This a Single-Use Device that was Reprocessed and Reused on a Patient? (Y/N): No
• Usage of Device: Initial
• Patient Sequence Number: 1
• Patient Sex: Unknown