|
While no serious injury resulted in this event, if this malfunction recurred, it could cause or contribute to a serious injury or require medical or surgical intervention to preclude such.This event, therefore, is reportable per 21cfr part 803.Usb 3 firmware v1.4 contains an issue in the portion of code used to optimize sensor performance.If the optimization occurs during an exposure or sensor readout, there is a chance that the resulting image will be corrupted.Image data following the point of corruption will consist of data that was previously held in the memory of the usb device.As a result, the presented image may contain a portion of data from a previous exposure.In general, this would be obvious to the user since the presented image would either contain obvious artifacts or different anatomy than expected.Field service evaluation- solution description: 02/03/2026, 13:18:5, (b)(4).On-site service: artifact in image.Remote access: yes - tv.Sidexis version: server location: pdata remote location: rcu location (if applicable): practice management: workstation(s): scout check: firmware: plug-in version: exposure count: unit ip address: troubleshooting details: 3rd party software is being used.The image has a mark on all images.The office took at least 4 images of the patient.( bit wing ).The image has an artifact showing on the right side of the image.Sensor sn: (b)(6).Functional test successful / follow up: 100008652 schick33 s2 sensor/3.0 cable rma kit, 9ft.There was no known injuries just an issue with a artifact on an image.
|
|
While the customer was using a part of an intraoral sensor system, schick33 s2 sensor ship kit/3.0 cable 9', they allege experiencing image quality issues when an x-ray image was taken and an additional image was required.No injury was reported from the alleged event.
|