MAUDE Adverse Event Report: MENTOR TEXAS MENTOR SMOOTH ROUND MODERATE PLUS PROFILE; PROSTHESIS, BREAST, INFLATABLE, INTERNAL, SALINE

Catalog Number	3502325
Medical Device Problem Codes	Material Rupture (1546); Migration (4003)
Health Effect - Clinical Code	Deformity/ Disfigurement (2360)
Date of Event	01/31/2026
Type of Reportable Event	Serious Injury
Event or Problem Description
It was reported that a patient with saline mentor smooth round moderate plus profile breast implants experienced deflation on the right side post-operatively, which was confirmed during a physical exam.As a result, the patient is scheduled for removal on (b)(6) 2026.
Additional Manufacturer Narrative
Since the device has not been returned for analysis, no product failure analysis can be conducted, and no determination of possible contributing factors can be made.As such, the investigation will be closed.If the complaint device is received in the future, the investigation will be reopened and conducted as appropriate.A manufacturing record evaluation (mre) was performed, and no anomalies were found related to this complaint.In addition, the mre verifies that the device was manufactured in accordance with documented specification and procedures.Mentor is submitting this report pursuant to the provisions of 21 cfr, part 803.This report may be based on information which mentor has not been able to investigate or verify prior to the required reporting date.This report does not reflect a conclusion by fda, mentor, or its employees that the report constitutes an admission that the device, mentor, or its employees caused or contributed to the potential event described in this report.If certain information is unknown, not available or does not apply, the section/field of the form is left blank.Reason for device explant and/or reoperation: deflation.Manufacturer¿s reference number: (b)(4).
Additional Manufacturer Narrative
On date, 2026, additional information was received indicating the replacement devices were mentor breast implants (serial numbers (b)(6).).Manufacturer¿s reference number: (b)(4).
Additional Manufacturer Narrative
On mar 24, 2026, it was noticed the previous report erroneously omitted the following information: the patient also experienced bilateral device migration.This report is for the right breast prosthesis.On mar 24, 2026, the mentor failure analysis lab received the device for evaluation.Device evaluation summary: the product was returned to mentor for evaluation.Mentor conducted visual inspection of the returned device.Visual analysis of the returned device revealed that the breast implant had a crease/fold on the anterior view.In addition, a tear was found within the crease/fold, measuring approximately 0.2 cm.The evaluation determined that the possible cause of the rupture is consistent with normal wear.Deflation can occur at any time after implantation, but it is more likely to occur the longer the implant is implanted.Creating wrinkles or folds should be avoided during implantation or other procedures as it can result in a deflation in a later time.Breast implants may also simply wear out over time.Implant displacement/migration may occur from improper implant sizing and/or placement, i.E., when the implant is too large or the pocket too small or when there has been inadequate preoperative assessment of stresses causing movement of the prosthesis.As part of mentor's quality process, all devices are manufactured, inspected, and released according to approved specifications.Based on the results of this investigation, it was determined that the product met the manufacturing release criteria, and that normal wear may have caused the observed defect.Manufacturer¿s reference number: (b)(4).

• Brand Name: MENTOR SMOOTH ROUND MODERATE PLUS PROFILE
• Common Device Name: PROSTHESIS, BREAST, INFLATABLE, INTERNAL, SALINE
• Manufacturer (Section D): MENTOR TEXAS; 3041 skyway circle north; irving TX 75038
• Manufacturer (Section G): MENTOR TEXAS; 3041 skyway circle north; irving TX 75038
• Manufacturer Contact: henry boden ; 3041 skyway circle north; irving, TX 75038 ; 9497882078
• MDR Report Key: 24431391
• Report Number: 1645337-2026-01944
• Device Sequence Number: 16013453
• Product Code: FWM
• UDI-Device Identifier: 00081317001409
• UDI-Public: (01)00081317001409(17)210810(10)7500401
• Combination Product (Y/N): N
• Initial Reporter Country: US
• PMA/510(K) Number: P990075
• Number of Events Summarized: 1
• Summary Report (Y/N): N
• Device Implanted Year: 2017
• Serviced by Third Party (Y/N): Unknown
• Reporter Type: Manufacturer
• Report Source: Health Professional
• Initial Reporter Occupation: Other
• Type of Report: Initial,Followup,Followup

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Is this an Adverse Event Report?: Yes
• Is this a Product Problem Report?: Yes
• Operator of Device: Health Professional
• Device Expiration Date: 08/10/2021
• Device Catalogue Number: 3502325
• Device Lot Number: 7500401
• Was Device Available for Evaluation?: Device Returned to Manufacturer
• Is the Reporter a Health Professional?: No
• Type of Report(Section G): Initial
• Initial Date Received by Manufacturer: 02/02/2026
• Supplement Date Received by Manufacturer: 02/25/2026; 03/24/2026
• Initial Report FDA Received Date: 02/24/2026
• Supplement Report FDA Received Date: 03/18/2026; 04/03/2026
• Was Device Evaluated by Manufacturer? (Y/N): Yes
• Date Device Manufactured: 08/11/2017
• Is the Device Labeled for Single Use? (Y/N): Yes
• Is This a Single-Use Device that was Reprocessed and Reused on a Patient? (Y/N): No
• Usage of Device: Initial
• Patient Sequence Number: 1
• Outcome Attributed to Adverse Event: Required Intervention
• Patient Age: 72 YR
• Patient Sex: Female