MAUDE Adverse Event Report: ETHICON INC. VCL+ VIO 18IN 3-0 S/A FS-2; SUTURE, ABSORBABLE, SYNTHETIC, POLYGLYCOLIC ACID

Catalog Number	VCP393H
Medical Device Problem Code	Material Separation (1562)
Health Effect - Clinical Code	No Clinical Signs, Symptoms or Conditions (4582)
Type of Reportable Event	Malfunction
Additional Manufacturer Narrative
Product complaint # (b)(4) this report is being submitted pursuant to the provisions of 21 cfr, part 803, part 4 subpart b.This report may be based on information which has not been investigated or verified prior to the required reporting date.This report does not reflect a conclusion by ethicon, or its employees that the report constitutes an admission that the product, ethicon, or its employees caused or contributed to the potential event described in this report.If information is obtained that was not available for the initial report, a follow-up report will be filed as appropriate.A manufacturing record evaluation was performed for the finished device lot, and no non-conformances were identified.Attempts have been made to retrieve the device.To date the device has not been returned.If the device or further details are received at a later date a supplemental medwatch will be sent.Additional information was requested, and the following was obtained via: did this issue contribute to any patient adverse event? no did the needle fall into the patient? no if so, was the needle piece(s) retrieved during the same procedure? were x-rays taken to locate the needle piece(s)? what measures were implemented to retrieve the broken piece? was there any additional tissue damage resulting from the search for the needle piece? please provide the source or name and title of external person providing answers to follow-up (external person submitting answers to sales rep or loc/bq) (b)(6).
Event or Problem Description
Needle detach.The needle came off the needle carrier before entering the mouth.Two damaged sutures in the same issue.One happening before suturing, the other during the suturing.
Additional Manufacturer Narrative
Product complaint # (b)(4).Date sent to the fda: 3/26/2026.This report is being submitted pursuant to the provisions of 21 cfr, part 803, part 4 subpart b.This report may be based on information which has not been investigated or verified prior to the required reporting date.This report does not reflect a conclusion by ethicon, or its employees that the report constitutes an admission that the product, ethicon, or its employees caused or contributed to the potential event described in this report.If information is obtained that was not available for the initial report, a follow-up report will be filed as appropriate.H6 component code: g07002 no device problem found.Additional information: d9, h3, h6.A manufacturing record evaluation was performed for the finished device lot, and no non-conformances were identified.H3 investigational summary: the product was returned to ethicon for evaluation.One empty open folder and one detached needle that pertains to product code vcp393h were received for analysis.Additionally, a photo was provided photo showed the same condition of the physically received sample.During the visual assessment of the detached needle, it was noted that the swage and attachment area were as expected.Marks on the body needle and the edge were noted probably caused by a surgical instrument.The barrel hole of the needle was examined under magnification, and suture remnant could be observed into the barrel hole.The suture was not returned for analysis.As part of our quality process, the manufacturing records of this lot-serial number were reviewed, and the manufacturing standards were met prior to the release of this batch.No conclusion could be reached as to what caused the reported complaint.As part of the ethicon quality process, all devices are manufactured, inspected, and released to approved specifications.Additional complaint information monitoring for potential safety signals is conducted through complaint trending as part of post-market surveillance.Additional h3 investigational summary: the product was returned to ethicon for evaluation.Two representative unopened samples were received for analysis.Product code vcp393h.Upon initial inspection of the samples, no external damages were observed on the external packets.In order to evaluate the conditions of the returned samples, the packets were opened, and no defects were detected.The swage and attachment area were noted to be as expected.The sutures were dispensed without problems and examined along the strand to detect any issue related no defects were observed during evaluation.A functional test was performed using instron equipment, and the pull force results were above the minimum requirements.The event described could not be confirmed as the device performed without any defect noted.It should be noted that as part of our quality process, each batch is randomly inspected and functionally tested during manufacturing to ensure the device meets the required specifications prior to shipment.The event described could not be confirmed as no product defect was identified, there may have been other circumstances or issues that occurred during the use of the device that could not be replicated during the laboratory analysis.Additional complaint information monitoring for potential safety signals is conducted through complaint trending as part of post-market surveillance.

• Brand Name: VCL+ VIO 18IN 3-0 S/A FS-2
• Common Device Name: SUTURE, ABSORBABLE, SYNTHETIC, POLYGLYCOLIC ACID
• Manufacturer (Section D): ETHICON INC.; 1000 route 202; raritan NJ 08869
• Manufacturer (Section G): ETHICON INC.-GMBH; robert-koch strasse 1; p.o. box 1409; norderstedt ; GM
• Manufacturer Contact: orla o'mahony ; 1000 route 202; raritan, NJ 08869 ; 3035526892
• MDR Report Key: 24431487
• Report Number: 2210968-2026-01931
• Device Sequence Number: 16028281
• Product Code: GAM
• UDI-Device Identifier: 10705031078093
• UDI-Public: (01)10705031078093(17)280131(10)XBBBMXC0
• Combination Product (Y/N): Y
• Initial Reporter Country: FI
• PMA/510(K) Number: K181652
• Number of Events Summarized: 1
• Summary Report (Y/N): N
• Serviced by Third Party (Y/N): Unknown
• Reporter Type: Manufacturer
• Report Source: Foreign,Health Professional,Company Representative,Distributor
• Initial Reporter Occupation: Other
• Type of Report: Initial,Followup
• Report Date (Section B): 02/24/2026

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Is this an Adverse Event Report?: No
• Is this a Product Problem Report?: Yes
• Operator of Device: Health Professional
• Device Catalogue Number: VCP393H
• Device Lot Number: XBBBMXC0
• Was Device Available for Evaluation?: Device Returned to Manufacturer
• Date Returned to Manufacturer: 02/24/2026
• Is the Reporter a Health Professional?: No
• Type of Report(Section G): Thirty-Day
• Initial Date Received by Manufacturer: 01/26/2026
• Supplement Date Received by Manufacturer: 03/02/2026
• Initial Report FDA Received Date: 02/24/2026
• Supplement Report FDA Received Date: 03/26/2026
• Was Device Evaluated by Manufacturer? (Y/N): Yes
• Date Device Manufactured: 02/06/2025
• Is the Device Labeled for Single Use? (Y/N): Yes
• Is This a Single-Use Device that was Reprocessed and Reused on a Patient? (Y/N): No
• Usage of Device: Initial
• Patient Sequence Number: 1
• Patient Sex: Unknown