MAUDE Adverse Event Report: CORDIS US. CORP SABERX014; CATHETER, ANGIOPLASTY, PERIPHERAL, TRANSLUMINAL

Catalog Number	47525300M
Medical Device Problem Code	Burst Container or Vessel (1074)
Health Effect - Clinical Code	No Clinical Signs, Symptoms or Conditions (4582)
Date of Event	02/17/2026
Type of Reportable Event	Malfunction
Additional Manufacturer Narrative
A review of the manufacturing documentation associated with lot 2507231225 presented no issues during the manufacturing process that can be related to the reported event.Additional information is pending and will be submitted within 30 days upon receipt.
Event or Problem Description
As reported, the balloon on a 2.5mm x 300mm saberx.014 percutaneous transluminal angioplasty (pta) balloon catheter ruptured before nominal dilation.There were no reported injuries to the patient.This was during below knee (bk) treatment.There was severe calcification.Additional information was requested but was not provided.The device will not be returned for evaluation.
Additional Manufacturer Narrative
After further review of additional information received the following sections have been updated accordingly: b4, g3, g6, h1, h2, h3, h6, and h11.Complaint conclusion: as reported, the balloon on a 2.5mm x 300mm saberx.014 percutaneous transluminal angioplasty (pta) balloon catheter ruptured before nominal dilation.There were no reported injuries to the patient.This was during below knee (bk) treatment.There was severe calcification.Additional information was requested but was not provided.The device will not be returned for evaluation.The device was not returned for evaluation.A product history record (phr) review of lot 2507231225 revealed no anomalies or non-conformances during the manufacturing and inspection processes that can be associated with the reported event.The reported ¿balloon burst - at/below rbp¿ could not be verified as the device was not returned for analysis.The exact cause could not be determined.Vessel characteristics, procedural factors or device handling may have contributed to the reported event.However, without the return of the device for analysis, and with the limited amount of information provided, it is difficult to draw a clinical conclusion between the device and the event reported.According to the instructions for use, which are not intended to mitigate risk, ¿carefully inspect the catheter prior to use to verify that the catheter has not been damaged and that its size, shape and condition are suitable for the procedure for which it is to be used.Flush or rinse all products entering the vascular system with sterile isotonic saline or a similar solution via the guide-wire access port prior to use.Never attempt to move the guide wire when the balloon is inflated.Do not advance the catheter against significant resistance.The cause of resistance should be determined via fluoroscopy.Inflation in excess of the rated burst pressure may cause the balloon to rupture.Use the recommended balloon inflation medium (25% contrast medium/75% sterile saline solution).It has been shown that a 25/75% contrast / saline ratio has yielded faster balloon inflation / deflation times.Never use air or other gaseous medium to inflate the balloon.If resistance is felt during post procedure withdrawal of the catheter through the introducer sheath, determine if contrast is trapped in the balloon with fluoroscopy.If contrast is present, push the balloon out of the sheath and then completely evacuate the contrast before proceeding to withdraw the balloon.If resistance is still felt during post procedure withdrawal of the catheter, it is recommended to remove the balloon catheter and guidewire/ introducer sheath as a single unit.Do not continue to use the balloon catheter if the shaft has been bent or kinked.¿ neither the phr nor the information available suggests a design or manufacturing related cause for the reported event.Therefore, no corrective or preventive action will be taken at this time.

• Brand Name: SABERX014
• Common Device Name: CATHETER, ANGIOPLASTY, PERIPHERAL, TRANSLUMINAL
• Manufacturer (Section D): CORDIS US. CORP; 14201 nw 60 avenue; miami lakes FL 33014
• Manufacturer (Section G): CORDIS US CORP.; 14201 nw 60 avenue; miami lakes FL 33014
• Manufacturer Contact: karla castro ; 15th building smes venture park songshan lake hi-tech zone; dongguan, guangdong ; 7863138372
• MDR Report Key: 24607849
• Report Number: 1016427-2026-00017
• Device Sequence Number: 21242687
• Product Code: LIT
• UDI-Device Identifier: 20705032089804
• UDI-Public: (01)20705032089804(17)280731(10)2507231225
• Combination Product (Y/N): N
• Initial Reporter Country: US
• Number of Events Summarized: 1
• Summary Report (Y/N): N
• Serviced by Third Party (Y/N): Unknown
• Reporter Type: Manufacturer
• Report Source: Foreign,Health Professional,Company Representative
• Initial Reporter Occupation: Other
• Type of Report: Initial,Followup
• Report Date (Section B): 03/24/2026

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Is this an Adverse Event Report?: No
• Is this a Product Problem Report?: Yes
• Device Catalogue Number: 47525300M
• Device Lot Number: 2507231225
• Was Device Available for Evaluation?: No
• Is the Reporter a Health Professional?: No
• Was the Report Sent to FDA?: No
• Type of Report(Section G): Thirty-Day
• Initial Date Received by Manufacturer: 02/19/2026
• Supplement Date Received by Manufacturer: 03/24/2026
• Initial Report FDA Received Date: 03/16/2026
• Supplement Report FDA Received Date: 03/24/2026
• Was Device Evaluated by Manufacturer? (Y/N): No
• Date Device Manufactured: 08/02/2025
• Is the Device Labeled for Single Use? (Y/N): Yes
• Is This a Single-Use Device that was Reprocessed and Reused on a Patient? (Y/N): No
• Usage of Device: Initial
• Patient Sequence Number: 1
• Concomitant Medical Products and Therapy/Usage Dates: 6FR PARENT.; BASALO NS3.
• Patient Sex: Unknown