MAUDE Adverse Event Report: ETHICON INC. MCRYL+ UD 18IN 3-0 S/A PS-2 PRM MP; SUTURE, ABSORBABLE, SYNTHETIC

Catalog Number	MCP497G
Medical Device Problem Code	Material Separation (1562)
Health Effect - Clinical Code	No Clinical Signs, Symptoms or Conditions (4582)
Date of Event	01/26/2026
Type of Reportable Event	Malfunction
Event or Problem Description
It was reported that a patient underwent an unknown procedure on (b)(6) 2026 and suture was used.During the procedure the needle fell off the suture four different times, like four different strands they pulled.They pulled it out of the case, the appeal pack, and when they want to go arm it, the needle popped off.No x-ray was done but they were able to retrieve the needle.No patient consequences.Device is returning.Additional information was requested.
Additional Manufacturer Narrative
Product complaint # (b)(4).Date sent to the fda: 3/20/2026.H6 component code: g07002 - pending evaluation of returned device.This report is being submitted pursuant to the provisions of 21 cfr, part 803, part 4 subpart b.This report may be based on information which has not been investigated or verified prior to the required reporting date.This report does not reflect a conclusion by ethicon, or its employees that the report constitutes an admission that the product, ethicon, or its employees caused or contributed to the potential event described in this report.If information is obtained that was not available for the initial report, a follow-up report will be filed as appropriate.Attempts are being made to obtain the following information.To date no response has been provided.If further details are received at a later date a supplemental medwatch will be sent: did the needles fall into the patient? if yes, was the needle piece(s) retrieved during the same procedure? were x-rays taken to locate the needle piece(s)? what measures were taken to retrieve the broken piece? was there any additional tissue damage as a result of searching for the needle piece? please provide the source or name and title of external person providing answers to follow-up (external person submitting answers to sales re to date the device has not been returned.If the device or further details are received at a later date a supplemental medwatch will be sent.
Additional Manufacturer Narrative
Product complaint # (b)(4).Date sent to the fda: 4/20/2026.This report is being submitted pursuant to the provisions of 21 cfr, part 803, part 4 subpart b.This report may be based on information which has not been investigated or verified prior to the required reporting date.This report does not reflect a conclusion by ethicon, or its employees that the report constitutes an admission that the product, ethicon, or its employees caused or contributed to the potential event described in this report.If information is obtained that was not available for the initial report, a follow-up report will be filed as appropriate.H6 component code: g07002 no device problem found.Additional information: d9, h3, h6.A manufacturing record evaluation was performed for the finished device lot, and no non-conformances were identified.H3 investigational summary: the product was returned to ethicon for evaluation.One open box with nine representative unopened samples were received for analysis.Product code mcp497g.The complaint sample was not received for evaluation.Upon initial inspection of the samples, no external damages were observed on the external packets.In order to evaluate the conditions of the returned samples, the packets were opened, and no defects were detected.The swage and attachment area were noted to be as expected.The sutures were dispensed without problems and examined along the strand to detect any issue related no defects were observed during evaluation.A functional test was performed using instron equipment, and the pull force results were above the minimum requirements.The event described could not be confirmed as the device performed without any defect noted.It should be noted that as part of our quality process, each batch is randomly inspected and functionally tested during manufacturing to ensure the device meets the required specifications prior to shipment.The event described could not be confirmed as no product defect was identified, there may have been other circumstances or issues that occurred during the use of the device that could not be replicated during the laboratory analysis.Additional complaint information monitoring for potential safety signals is conducted through complaint trending as part of post-market surveillance.

• Brand Name: MCRYL+ UD 18IN 3-0 S/A PS-2 PRM MP
• Common Device Name: SUTURE, ABSORBABLE, SYNTHETIC
• Manufacturer (Section D): ETHICON INC.; 1000 route 202; raritan NJ 08869
• Manufacturer (Section G): ETHICON INC.-JUAREZ; calle durango #2751; ciudad juarez 32575 ; MX 32575
• Manufacturer Contact: orla o'mahony ; 1000 route 202; raritan, NJ 08869 ; 3035526892
• MDR Report Key: 24648706
• Report Number: 2210968-2026-02848
• Device Sequence Number: 13235413
• Product Code: GAM
• UDI-Device Identifier: 10705031046603
• UDI-Public: (01)10705031046603(17)270630(10)109UEH
• Combination Product (Y/N): Y
• Initial Reporter State: PA
• Initial Reporter Country: US
• PMA/510(K) Number: K050845
• Number of Events Summarized: 1
• Summary Report (Y/N): N
• Serviced by Third Party (Y/N): Unknown
• Reporter Type: Manufacturer
• Report Source: Health Professional,Company Representative
• Initial Reporter Occupation: Other
• Type of Report: Initial,Followup

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Is this an Adverse Event Report?: No
• Is this a Product Problem Report?: Yes
• Operator of Device: Health Professional
• Device Catalogue Number: MCP497G
• Device Lot Number: 109UEH
• Was Device Available for Evaluation?: Device Returned to Manufacturer
• Date Returned to Manufacturer: 03/19/2026
• Is the Reporter a Health Professional?: No
• Type of Report(Section G): Thirty-Day
• Initial Date Received by Manufacturer: 02/25/2026
• Supplement Date Received by Manufacturer: 03/29/2026
• Initial Report FDA Received Date: 03/20/2026
• Supplement Report FDA Received Date: 04/20/2026
• Was Device Evaluated by Manufacturer? (Y/N): Yes
• Date Device Manufactured: 07/23/2025
• Is the Device Labeled for Single Use? (Y/N): Yes
• Is This a Single-Use Device that was Reprocessed and Reused on a Patient? (Y/N): No
• Usage of Device: Initial
• Patient Sequence Number: 1
• Patient Sex: Unknown