|
Blocks a2/a3b/a4: the patient's dob or age at time of event, gender, and weight are unknown.This information was not available from the facility.Blocks b6/b7: patient information regarding relevant tests/laboratory data or medical history are unknown.This information was not available from the facility.Block g2: foreign- japan block h3: the angiosculpt device was infectious and discarded by the facility, thus no product investigation was performed.Block h6: the ifu warns at least 99.9% of the balloons (with a 95% confidence level) will not burst at or below the rbp.Submission of this report does not, in itself, represent a conclusion by the manufacturer and/or authorized representative or the national competent authority that the content of this report is complete or accurate, that the medical device(s) listed failed in any manner and/or that the medical device(s) caused or contributed to an alleged death or deterioration in the state of the health of any person.
|
|
An angiosculpt device was used for a peripheral therapeutic procedure in the sfa.During use, the balloon ruptured under nominal pressure (nominal: 8 atm, rbp: 14 atm).The procedure was completed with a new balloon catheter.No patient injury reported.This product problem is being submitted conservatively because the balloon ruptured below rbp.
|