• Decrease font size
  • Return font size to normal
  • Increase font size
U.S. Department of Health and Human Services

MAUDE Adverse Event Report: COVIDIEN AG JUAREZ (MMJ) SHILEY; TUBE, TRACHEAL (W/WO CONNECTOR)

  • Print
  • Share
  • E-mail
-
Super Search Devices@FDA
510(k) | DeNovo | Registration & Listing | Adverse Events | Recalls | PMA | HDE | Classification | Standards
CFR Title 21 | Radiation-Emitting Products | X-Ray Assembler | Medsun Reports | CLIA | TPLC
 

COVIDIEN AG JUAREZ (MMJ) SHILEY; TUBE, TRACHEAL (W/WO CONNECTOR) Back to Search Results
Model Number 18780
Medical Device Problem Code Use of Device Problem (1670)
Health Effect - Clinical Code No Clinical Signs, Symptoms or Conditions (4582)
Date of Event 03/06/2026
Type of Reportable Event Malfunction
Event or Problem Description
It was reported that during procedure, based on the attached photo, one pilot balloon was deformed in the packaging.When the cuff was inflated to the correct pressure, these blue cuff remained dented on the outside, making it appeared that it was not properly inflated, and the cuff measurements was incorrect.Afterward, the team opened nineteen more devices and found that the same problem was presented in the tubes that were still inside their packaging.There was no patient injury.
 
Additional Manufacturer Narrative
D10 concomitant products: 18780, 18780 8.0mm taperguard tracheal tubex10, (lot# 25k0188jzx) 18780, 18780 8.0mm taperguard tracheal tubex10, (lot# 25k0188jzx) 18780, 18780 8.0mm taperguard tracheal tubex10, (lot# 25k0188jzx) 18780, 18780 8.0mm taperguard tracheal tubex10, (lot# 25k0188jzx) 18780, 18780 8.0mm taperguard tracheal tubex10, (lot# 25k0188jzx) 18780, 18780 8.0mm taperguard tracheal tubex10, (lot# 25k0188jzx) 18780, 18780 8.0mm taperguard tracheal tubex10, (lot# 25k0188jzx) 18780, 18780 8.0mm taperguard tracheal tubex10, (lot# 25k0188jzx) 18780, 18780 8.0mm taperguard tracheal tubex10, (lot# 25k0188jzx) 18780, 18780 8.0mm taperguard tracheal tubex10, (lot# 25k0188jzx) 18780, 18780 8.0mm taperguard tracheal tubex10, (lot# 25k0188jzx) 18780, 18780 8.0mm taperguard tracheal tubex10, (lot# 25k0188jzx) 18780, 18780 8.0mm taperguard tracheal tubex10, (lot# 25k0188jzx) 18780, 18780 8.0mm taperguard tracheal tubex10, (lot# 25k0188jzx) 18780, 18780 8.0mm taperguard tracheal tubex10, (lot# 25k0188jzx) 18780, 18780 8.0mm taperguard tracheal tubex10, (lot# 25k0188jzx) 18780, 18780 8.0mm taperguard tracheal tubex10, (lot# 25k0188jzx) 18780, 18780 8.0mm taperguard tracheal tubex10, (lot# 25k0188jzx) 18780, 18780 8.0mm taperguard tracheal tubex10, (lot# 25k0188jzx).Medtronic submits this report to comply with fda regulations 21 cfr parts 4 and 803.Medtronic has made reasonable efforts to provide as much relevant information as is available to the company as of the submission date of this report.This report does not constitute an admission or a conclusion by fda, medtronic, or its employees that the device, medtronic, or its employee caused or contributed to the event described in the report.Any required fields that are unpopulated are blank because the information is currently unknown or unavailable.Medtronic will submit a supplemental report if additional relevant information becomes known.
 
Event or Problem Description
It was reported that during procedure, based on the attached photo, one pilot balloon was deformed in the packaging.When the cuff was inflated to the correct pressure, these blue cuff remained dented on the outside, making it appeared that it was not properly inflated, and the cuff measurements was incorrect.Afterward, the team opened twenty two more devices and found that the same problem was presented in the tubes that were still inside their packaging.There was no patient injury.
 
Additional Manufacturer Narrative
Correction: b5 medtronic submits this report to comply with fda regulations 21 cfr parts 4 and 803.Medtronic has made reasonable efforts to provide as much relevant information as is available to the company as of the submission date of this report.This report does not constitute an admission or a conclusion by fda, medtronic, or its employees that the device, medtronic, or its employee caused or contributed to the event described in the report.Any required fields that are unpopulated are blank because the information is currently unknown or unavailable.Medtronic will submit a supplemental report if additional relevant information becomes known.
 
Additional Manufacturer Narrative
Additional information: d9, g3, h3, h9 h3 evaluation summary: medtronic conducted an investigation based upon all information received.The device was available for evaluation.The evaluation found no potentially contributing factors, and the sample met all related specifications.It was reported that based on the attached photo, one pilot balloon was deformed in the packaging.When the cuff was inflated to the correct pressure, these blue cuff remained dented on the outside, making it appeared that it was not properly inflated, and the cuff measurements was incorrect.Afterward, the team opened twenty two more devices and found that the same problem was presented in the tubes that were still inside their packaging.The reported issue could not be confirmed.The most likely cause could not be identified because no related problem was detected with the device.The manufacturing records for each device are thoroughly reviewed prior to release to ensure that it meets all medtronic quality specifications.Medtronic submits this report to comply with fda regulations 21 cfr parts 4 and 803.Medtronic has made reasonable efforts to provide as much relevant information as is available to the company as of the submission date of this report.This report does not constitute an admission or a conclusion by fda, medtronic, or its employees that the device, medtronic, or its employee caused or contributed to the event described in the report.Any required fields that are unpopulated are blank because the information is currently unknown or unavailable.Medtronic will submit a supplemental report if additional relevant information becomes known.
 
Search Alerts/Recalls

  New Search  |  Submit an Adverse Event Report

Brand Name
SHILEY
Common Device Name
TUBE, TRACHEAL (W/WO CONNECTOR)
Manufacturer (Section D)
COVIDIEN AG JUAREZ (MMJ)
1181 hennequen ave.
juarez,chi 32575
MX  32575
Manufacturer (Section G)
COVIDIEN AG JUAREZ (MMJ)
1181 hennequen ave.
juarez,chi 32575
MX   32575
Manufacturer Contact
mike bocchino
8200 coral sea st ne
mounds view, MN 55112-4391
8006464633
MDR Report Key24671469
Report Number9681384-2026-00338
Device Sequence Number21367124
Product Code BTR
UDI-Device Identifier10884522007610
UDI-Public(01)10884522007610(17)301106(10)25K0188JZX(20)01
Combination Product (Y/N)N
Initial Reporter CountryBE
PMA/510(K) Number
K090352
Number of Events Summarized1
Summary Report (Y/N)N
Serviced by Third Party (Y/N)N
Reporter Type Manufacturer
Report Source Foreign,Health Professional,Company Representative
Initial Reporter Occupation Other Health Care Professional
Type of Report Initial,Followup,Followup
Report Date (Section B) 06/08/2026
1 Device was Involved in the Event
1 Patient was Involved in the Event
Is this an Adverse Event Report? No
Is this a Product Problem Report? Yes
Operator of Device Health Professional
Device Model Number18780
Device Catalogue Number18780
Device Lot Number25K0188JZX
Was Device Available for Evaluation? Device Returned to Manufacturer
Date Returned to Manufacturer03/17/2026
Is the Reporter a Health Professional? Yes
Type of Report(Section G)Thirty-Day
Initial Date Received by Manufacturer 03/06/2026
Supplement Date Received by Manufacturer03/24/2026
06/04/2026
Initial Report FDA Received Date03/23/2026
Supplement Report FDA Received Date03/30/2026
06/08/2026
Was Device Evaluated by Manufacturer? (Y/N) Yes
Date Device Manufactured11/06/2025
Is the Device Labeled for Single Use? (Y/N) Yes
Is This a Single-Use Device that was
Reprocessed and Reused on a Patient? (Y/N)
No
Usage of Device Initial
Patient Sequence Number1
Concomitant Medical Products
and Therapy/Usage Dates
SEE H11
Patient SexUnknown
-
-