|
(b)(4).Date sent: 4/16/2026 d4: batch # 590d77 investigation summary the product was returned to ethicon endo surgery for evaluation.Visual inspection and functional testing were conducted on the returned sample.Visual analysis of the returned sample determined that the glcr80b reload was received with no apparent damage along with an opened packaging.The reload had the proximal 19 drivers up without staples and the swing tab in the unlocked position.Furter evaluation shows that 2 staples were missing on the distal end of the reload.No functional test was performed in order to preserve evidence.The event reported was confirmed and it is related to improper use of the device.The swing tab in unlocked position with proximal drivers up is consistent with the reload being loaded when the firing knobs are forward or the knobs are advanced prior to the intended firing stroke, causing the device to prevent closure.It is possible that improper handling of the reload caused the staples to fell out, the proper handling instructions should be used when removing and reloading cartridges into the device.It should be noted that 100% inspection is performed by means of an automated vision system to ensure staples presence; the swing tab is present and unlocked.Please reference the instruction for use for more information.As part of ethicon endo surgery¿s quality process all devices are manufactured, inspected, and released to approved specifications.Device history review a manufacturing record evaluation was performed for the finished device batch number 590d77, and no non-conformances were identified.This report is being submitted pursuant to the provisions of 21 cfr, part 803.This report may be based on information which has not been investigated or verified prior to the required reporting date.This report does not reflect a conclusion by ethicon, or its employees that the report constitutes an admission that the product, ethicon, or its employees caused or contributed to the potential event described in this report.If information is obtained that was not available for the initial report, a follow-up report will be filed as appropriate.
|