|
Product complaint # (b)(4).Date sent to the fda: 4/20/2026.This report is being submitted pursuant to the provisions of 21 cfr, part 803, part 4 subpart b.This report may be based on information which has not been investigated or verified prior to the required reporting date.This report does not reflect a conclusion by ethicon, or its employees that the report constitutes an admission that the product, ethicon, or its employees caused or contributed to the potential event described in this report.If information is obtained that was not available for the initial report, a follow-up report will be filed as appropriate.A manufacturing record evaluation was performed for the finished device lot, and no non-conformances were identified h3 investigational summary: the product was returned to eth for evaluation.Visual inspection revealed that one labeled winding former with one needle and one suture outside the foil packet was received for analysis.Product code vcp303h.During the visual inspection of the suture, it was noted that the suture has begun with degradation process attributed to exposure to the environment.This condition caused the needle to be detached from the suture.The foil was visually inspected, and excessive wrinkles and holes in the cavity were observed.The condition of the package is indicative of handling and storage issues that occurred outside of ethicon control.As part of eth quality process all devices are manufactured, inspected, and released to approved specifications.Additional complaint information monitoring for potential safety signals is conducted through complaint trending as part of post market surveillance.
|