| Catalog Number |
472252236 |
| Medical Device Problem Code |
Adverse Event Without Identified Device or Use Problem (2993)
|
| Health Effect - Clinical Code |
Unspecified Infection (1930)
|
| Date of Event |
04/16/2026
|
|
Type of Reportable Event
|
Serious Injury
|
|
Additional Manufacturer Narrative
|
|
Product complaint # (b)(4).This report is being submitted pursuant to the provisions of 21 cfr, part 803 (and/or part 4, as applicable).This report may be based on information which has not been investigated or verified prior to the required reporting date.This report does not reflect a conclusion by depuy synthes, or its employees that the report constitutes an admission that the product, depuy synthes, or its employees caused or contributed to the potential event described in this report.If information is obtained that was not available for the initial report, a follow-up report will be filed as appropriate.
|
| |
|
Event or Problem Description
|
|
It was reported that emsys lnr aox elv 52x36, unk hip femoral head ceramic, emsys shl 3hole 52, pinn can bone screw 6.5mmx35mm, and unknown screw were involved in a reported event.The event concerned a patient who underwent a dair (debridement, antibiotics, and implant retention) procedure due to infection following implantation of an emphasys corail construct.During the operation, the cup was described as loose, but it was not removed because the patient was likely to require a multi-stage revision and screws were already in place.The reported failure included infection and implant loosening.The patient experienced harm, requiring revision of the liner and implantation of a new femoral head as part of the washout for infection.Extended hospitalization was necessary for surgical intervention to address the infection.The event is likely to result in further multi-stage revision procedures.The implant status for the liner and femoral head is explanted.
|
| |
|
Additional Manufacturer Narrative
|
|
Product complaint # (b)(4).Investigation summary: no device associated with this report was received for examination.The product investigation found no evidence suspecting an error in the manufacturing or material that would be a contributing factor in the reported allegation(s).A records evaluation (mre) was not perform.As part of our company quality system process, all devices are manufactured, inspected, and distributed to approved specifications.Additional complaint information monitoring for potential safety signals will be conducted through complaint trending as part of the post-market surveillance.If additional information is made available, the investigation will be updated as applicable.Device history lot: there is no evidence suspecting an error in the manufacturing or material that would be a contributing factor in the reported allegation(s).A manufacturing records evaluation (mre) was not performed.Added: d10 concomitant.
|
| |
|
Search Alerts/Recalls
|