MAUDE Adverse Event Report: COVIDIEN MEDICAL PRODUCTS EMPRINT; ELECTROSURGICAL, CUTTING & COAGULATION & ACCES

Model Number	CA15L2
Medical Device Problem Codes	Leak/Splash (1354); Overheating of Device (1437); Peeled/Delaminated (1454)
Health Effect - Clinical Code	No Clinical Signs, Symptoms or Conditions (4582)
Date of Event	04/14/2026
Type of Reportable Event	Malfunction
Additional Manufacturer Narrative
Medtronic submits this report to comply with fda regulations 21 cfr parts 4 and 803.Medtronic has made reasonable efforts to provide as much relevant information as is available to the company as of the submission date of this report.This report does not constitute an admission or a conclusion by fda, medtronic, or its employees that the device, medtronic, or its employee caused or contributed to the event described in the report.Any required fields that are unpopulated are blank because the information is currently unknown or unavailable.Medtronic will submit a supplemental report if additional relevant information becomes known.
Event or Problem Description
It was reported that during thermoablation, the needle overheated, causing the needle tip to melt.When the needle was removed, there was a leak in the cooling system.Nothing fell into patient's cavity so no x-ray or additional medical procedure were performed.A new needle was used to complete the procedure.There was no patient injury.

• Brand Name: EMPRINT
• Common Device Name: ELECTROSURGICAL, CUTTING & COAGULATION & ACCES
• Manufacturer (Section D): COVIDIEN MEDICAL PRODUCTS; building 10- no 789 puxing roa; shanghai 20111 4; CH 201114
• Manufacturer (Section G): COVIDIEN MEDICAL PRODUCTS; building 10- no 789 puxing roa; shanghai 20111 4; CH 201114
• Manufacturer Contact: mike bocchino ; 8200 coral sea st ne; mounds view, MN 55112-4391 ; 8006464633
• MDR Report Key: 25203519
• Report Number: 3006451981-2026-00042
• Device Sequence Number: 10083158
• Product Code: GEI
• UDI-Device Identifier: 10884521806542
• UDI-Public: (01)10884521806542(17)270807(10)S25HG003(20)02
• Combination Product (Y/N): N
• Initial Reporter Country: FR
• PMA/510(K) Number: K163105
• Number of Events Summarized: 1
• Summary Report (Y/N): N
• Serviced by Third Party (Y/N): N
• Reporter Type: Manufacturer
• Report Source: Foreign,Health Professional,Company Representative
• Initial Reporter Occupation: Other Health Care Professional
• Type of Report: Initial
• Report Date (Section B): 05/18/2026

1 Device was Involved in the Event

1 Patient was Involved in the Event

• Is this an Adverse Event Report?: No
• Is this a Product Problem Report?: Yes
• Operator of Device: Health Professional
• Device Model Number: CA15L2
• Device Catalogue Number: CA15L2
• Device Lot Number: S25HG003
• Was Device Available for Evaluation?: No
• Is the Reporter a Health Professional?: Yes
• Type of Report(Section G): Thirty-Day
• Initial Date Received by Manufacturer: 04/23/2026
• Initial Report FDA Received Date: 05/18/2026
• Date Device Manufactured: 08/07/2025
• Is the Device Labeled for Single Use? (Y/N): Yes
• Is This a Single-Use Device that was Reprocessed and Reused on a Patient? (Y/N): No
• Usage of Device: Initial
• Patient Sequence Number: 1
• Patient Sex: Unknown