|
(b)(4).Date sent: 6/19/2026.D4: batch #887d28.Investigation summary: the product was returned for evaluation.Visual inspection and functional testing were conducted on the returned device.Visual analysis of the returned sample determined that one pcee60a device was returned with no apparent damage and with a gst60t reload loaded on the device.The reload was received partially fired 1/5.In addition, a half of butressing was returned inside a plastic bag along with the sample.The returned device and reload were tested for functionality in the straight position by resetting and reloading it into the device.The device achieved its complete firing sequence without any difficulties.The staple line and cut line were complete and the remaining staples met the staple form release criteria.The partially fired is consistent with an incomplete or interrupted cycle.As part of ethicon endo surgery¿s quality process, all devices are manufactured, inspected, and released to approved specifications.A manufacturing record evaluation was performed for the finished device batch number 887d28, and no non-conformances were identified.This report is being submitted pursuant to the provisions of 21 cfr, part 803.This report may be based on information which has not been investigated or verified prior to the required reporting date.This report does not reflect a conclusion by ethicon, or its employees that the report constitutes an admission that the product, ethicon, or its employees caused or contributed to the potential event described in this report.If information is obtained that was not available for the initial report, a follow-up report will be filed as appropriate.
|
|
It was reported that during a pancreatectomy, it was observed that the knife did not move forward, and transection could not be done.The device was not used for the patient.The cartridge color was black.Another device was used to complete the case.There were no adverse consequences to the patient.No additional information was provided.
|